- 09 11月, 2010 5 次提交
-
-
由 Gerd Hoffmann 提交于
This patch adds MSI support to the intel hda audio driver. It is enabled by default, use '-device intel-hda,msi=0' to disable it. [ v2: codestyle: add braces ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Gerd Hoffmann 提交于
When the guest updates the WAKEEN register we must re-calculate the IRQ status. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 François Revol 提交于
HDA: Honor WAKEEN bits when deciding to raise an interrupt on codec status change. This prevents an interrupt storm with the Haiku HDA driver which does not handle codec status changes in the irq handler. Signed-off-by: NFrançois Revol <revol@free.fr> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Gerd Hoffmann 提交于
Add exit callback to the driver. Unregister the sound card properly on exit. [ v2: codestyle: add braces ] Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Gerd Hoffmann 提交于
Add pci exit callback for the intel-hda device and cleanup properly. Also add an exit callback to the HDA bus implementation and make sure it is called on qdev_free(). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 07 11月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Fix a return value change missed by 205ef796. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 04 11月, 2010 15 次提交
-
-
由 Kevin Wolf 提交于
Fix scsi-disk to use the usual completion paths that involve rerror/werror handling instead of directly completing the requests in cases where bdrv_aio_readv/writev returns NULL. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Fix virtio-blk to use the usual completion path that involves werror handling instead of directly completing the request in cases where bdrv_aio_flush returns NULL. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
If bdrv_aio_flush returns NULL, this should be treated as an error. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Blue Swirl 提交于
When building on a 64 bit host which uses 'long' for int64_t, GCC emits a warning: CC block/blkverify.o /src/qemu/block/blkverify.c: In function `blkverify_verify_readv': /src/qemu/block/blkverify.c:304: warning: long long int format, long unsigned int arg (arg 3) Rework a77cffe7 to avoid the warning. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
The cache content may be destroyed after a failed read, better not use it any more. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Kevin Wolf 提交于
This pulls the request completion for error cases from the caller to scsi_disk_emulate_command. This should not change semantics, but allows to reuse scsi_handle_write_error() for flushes in the next patch. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Kevin Wolf 提交于
This changes bdrv_flush to return 0 on success and -errno in case of failure. It's a requirement for implementing proper error handle in users of bdrv_flush. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Kevin Wolf 提交于
This implements the rerror option for SCSI disks. It also includes minor changes to the write path where the same code is used that was criticized in the review for the changes to the read path required for rerror support. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Jes Sorensen 提交于
The current send_all() wrapper for POSIX calls does nothing but call unix_write(). Merge them to simplify the code. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jes Sorensen 提交于
'f' double is no longer used, and we should be using floating point variables to store byte sizes. Remove it. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jes Sorensen 提交于
Clarify default value of MB in migration speed argument in monitor, if no suffix is specified. This differ from previous default of bytes, but is consistent with the rest of the places where we accept a size argument. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jes Sorensen 提交于
Octet format relies on strtosz which supports K/k, M/m, G/g, T/t suffixes and unit support for humans, like 1.3G Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jes Sorensen 提交于
strtosz() returns -1 on error. It now supports human unit formats in eg. 1.0G, with better error handling. The following suffixes are supported: B/b = bytes K/k = KB M/m = MB G/g = GB T/t = TB This patch changes -numa and -m input to use strtosz(). Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 11月, 2010 3 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Blue Swirl 提交于
df2943ba broke out of tree build. Fix breakage by adding $(SRC_PATH). Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Anthony Liguori 提交于
-
- 01 11月, 2010 5 次提交
-
-
由 Anthony Liguori 提交于
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Gerd Hoffmann 提交于
This patch adds three devices to qemu: intel-hda Intel HD Audio Controller, the PCI device. Provides a HDA bus. Emulates ICH6 at the moment. Adding a ICH9 PCIE variant shouldn't be hard. hda-duplex HDA Codec. Attaches to the HDA bus. Supports 16bit stereo, rates 16k -> 96k, playback, recording and volume control (with CONFIG_MIXEMU=y). hda-output HDA Codec without recording support. Subset of the hda-duplex codec. Use this if you don't want your guests access your mic. Usage: add '-device intel-hda -device hda-duplex' to your command line. Tested guests: * Linux works. * Win7 works. * DOS (mpxplay) works. * WinXP doesn't work. [ v2 changes ] * Fixed endianess, big endian hosts work now. * Fixed some emulation bugs. * Added immediate command emulation. * Added vmstate support. * Make it behave like all other sound card drivers: - can be configured via '--audio-card-list=hda' - can be added to a VM using '-soundhw hda' * Code style fixups. * Zapped guest-triggerable asserts. * Handle partial reads/writes of audio data correctly. Cc: malc <av1474@comtv.ru> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
由 malc 提交于
Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 31 10月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Replace debug printf statements with tracepoints. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 30 10月, 2010 10 次提交
-
-
由 Jes Sorensen 提交于
No need to include stdlib.h for BSD as it is included by qemu-common.h, windows.h is handled by sysemu.h and osdep.c no longer needs malloc.h Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
This consolidates the duplicated oom_check() functions, as well as splitting them into OS dependant versions to avoid the #ifdef grossness that was present in the old osdep.c version. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
TRUE/FALSE are generally reserved keywords and shouldn't be defined in a driver like this. Rename the macros to SDP_TRUE and SDP_FALSE respectively. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Jes Sorensen 提交于
This moves library functions used by both QEMU and the QEMU tools, such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c In addition it introduces oslib-obj.y to the Makefile set to be included by the various targets, instead of relying on these library functions magically getting included via block-obj-y. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Stefan Weil 提交于
fprintf_function uses format checking with GCC_FMT_ATTR. Format errors were fixed in * target-i386/helper.c * target-mips/translate.c * target-ppc/translate.c Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-