提交 14e51cc7 编写于 作者: T ths

De-cruft exception definitions, and implement nicer debug output.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3861 c046a42c-6fe2-441c-8c8c-71466251a162
上级 85016c98
......@@ -523,40 +523,37 @@ enum {
EXCP_SRESET,
EXCP_DSS,
EXCP_DINT,
EXCP_DDBL,
EXCP_DDBS,
EXCP_NMI,
EXCP_MCHECK,
EXCP_EXT_INTERRUPT,
EXCP_EXT_INTERRUPT, /* 8 */
EXCP_DFWATCH,
EXCP_DIB, /* 8 */
EXCP_DIB,
EXCP_IWATCH,
EXCP_AdEL,
EXCP_AdES,
EXCP_TLBF,
EXCP_IBE,
EXCP_DBp,
EXCP_DBp, /* 16 */
EXCP_SYSCALL,
EXCP_BREAK, /* 16 */
EXCP_BREAK,
EXCP_CpU,
EXCP_RI,
EXCP_OVERFLOW,
EXCP_TRAP,
EXCP_FPE,
EXCP_DDBS,
EXCP_DWATCH,
EXCP_LAE, /* 24 */
EXCP_SAE,
EXCP_DWATCH, /* 24 */
EXCP_LTLBL,
EXCP_TLBL,
EXCP_TLBS,
EXCP_DBE,
EXCP_DDBL,
EXCP_THREAD,
EXCP_MTCP0 = 0x104, /* mtmsr instruction: */
/* may change privilege level */
EXCP_BRANCH = 0x108, /* branch instruction */
EXCP_ERET = 0x10C, /* return from interrupt */
EXCP_SYSCALL_USER = 0x110, /* System call in user mode only */
EXCP_FLUSH = 0x109,
EXCP_MDMX,
EXCP_C2E,
EXCP_CACHE, /* 32 */
EXCP_LAST = EXCP_CACHE,
};
int cpu_mips_exec(CPUMIPSState *s);
......
......@@ -318,20 +318,62 @@ int cpu_mips_handle_mmu_fault (CPUState *env, target_ulong address, int rw,
return ret;
}
#if defined(CONFIG_USER_ONLY)
void do_interrupt (CPUState *env)
{
env->exception_index = EXCP_NONE;
}
#else
#if !defined(CONFIG_USER_ONLY)
static struct _excp_names {
int excp;
char *name;
} excp_names[EXCP_LAST + 1] = {
{ EXCP_RESET, "reset" },
{ EXCP_SRESET, "soft reset" },
{ EXCP_DSS, "debug single step" },
{ EXCP_DINT, "debug interrupt" },
{ EXCP_NMI, "non-maskable interrupt" },
{ EXCP_MCHECK, "machine check" },
{ EXCP_EXT_INTERRUPT, "interrupt" },
{ EXCP_DFWATCH, "deferred watchpoint" },
{ EXCP_DIB, "debug instruction breakpoint" },
{ EXCP_IWATCH, "instruction fetch watchpoint" },
{ EXCP_AdEL, "address error load" },
{ EXCP_AdES, "address error store" },
{ EXCP_TLBF, "TLB refill" },
{ EXCP_IBE, "instruction bus error" },
{ EXCP_DBp, "debug breakpoint" },
{ EXCP_SYSCALL, "syscall" },
{ EXCP_BREAK, "break" },
{ EXCP_CpU, "coprocessor unusable" },
{ EXCP_RI, "reserved instruction" },
{ EXCP_OVERFLOW, "arithmetic overflow" },
{ EXCP_TRAP, "trap" },
{ EXCP_FPE, "floating point" },
{ EXCP_DDBS, "debug data break store" },
{ EXCP_DWATCH, "data watchpoint" },
{ EXCP_LTLBL, "TLB modify" },
{ EXCP_TLBL, "TLB load" },
{ EXCP_TLBS, "TLB store" },
{ EXCP_DBE, "data bus error" },
{ EXCP_DDBL, "debug data break load" },
{ EXCP_THREAD, "thread" },
{ EXCP_MDMX, "MDMX" },
{ EXCP_C2E, "precise coprocessor 2" },
{ EXCP_CACHE, "cache error" },
};
#endif
void do_interrupt (CPUState *env)
{
#if !defined(CONFIG_USER_ONLY)
target_ulong offset;
int cause = -1;
char *name;
if (logfile && env->exception_index != EXCP_EXT_INTERRUPT) {
fprintf(logfile, "%s enter: PC " TARGET_FMT_lx " EPC " TARGET_FMT_lx " cause %d excp %d\n",
__func__, env->PC[env->current_tc], env->CP0_EPC, cause, env->exception_index);
if (env->exception_index < 0 || env->exception_index > EXCP_LAST)
name = "unknown";
else
name = excp_names[env->exception_index].name;
fprintf(logfile, "%s enter: PC " TARGET_FMT_lx " EPC " TARGET_FMT_lx " %s exception\n",
__func__, env->PC[env->current_tc], env->CP0_EPC, name);
}
if (env->exception_index == EXCP_EXT_INTERRUPT &&
(env->hflags & MIPS_HFLAG_DM))
......@@ -520,15 +562,15 @@ void do_interrupt (CPUState *env)
exit(1);
}
if (logfile && env->exception_index != EXCP_EXT_INTERRUPT) {
fprintf(logfile, "%s: PC " TARGET_FMT_lx " EPC " TARGET_FMT_lx " cause %d excp %d\n"
fprintf(logfile, "%s: PC " TARGET_FMT_lx " EPC " TARGET_FMT_lx " cause %d\n"
" S %08x C %08x A " TARGET_FMT_lx " D " TARGET_FMT_lx "\n",
__func__, env->PC[env->current_tc], env->CP0_EPC, cause, env->exception_index,
__func__, env->PC[env->current_tc], env->CP0_EPC, cause,
env->CP0_Status, env->CP0_Cause, env->CP0_BadVAddr,
env->CP0_DEPC);
}
#endif /* !defined(CONFIG_USER_ONLY) */
env->exception_index = EXCP_NONE;
}
#endif /* !defined(CONFIG_USER_ONLY) */
void r4k_invalidate_tlb (CPUState *env, int idx, int use_extra)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册