Support OpenGL accelerated rendering when using SDL graphics in the
domain config. Add associated test and documentation.
Signed-off-by: NMaciej Wolny <maciej.wolny@codethink.co.uk>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduces the vfio-ccw model for mediated devices and prime vfio-ccw
devices such that CCW address will be generated.

Alters the qemuxml2xmltest for testing a basic mdev device using vfio-ccw.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: NStefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Let us introduce the capability QEMU_CAPS_CCW for virtual-css-bridge
and replace QEMU_CAPS_VIRTIO_CCW with QEMU_CAPS_CCW in code segments
which identify support for ccw devices.

The virtual-css-bridge is part of the ccw support introduced in QEMU 2.7.
The QEMU_CAPS_CCW capability is based on the existence of the QEMU type.

Let us also add the capability QEMU_CAPS_CCW to the tests which
require support for ccw devices.
Signed-off-by: NShalini Chellathurai Saroja <shalini@linux.vnet.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This is a definition that holds information on SCSI persistent
reservation settings. The XML part looks like this:

  <reservations enabled='yes' managed='no'>
    <source type='unix' path='/path/to/qemu-pr-helper.sock' mode='client'/>
  </reservations>

If @managed is set to 'yes' then the <source/> is not parsed.
This design was agreed on here:

https://www.redhat.com/archives/libvir-list/2017-November/msg01005.htmlSigned-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

The -no-kvm-pit-reinjection option has been deprecated since
its introduction in QEMU 1.3. See commit <1569fa14>.

Drop the capability since all the QEMUs we support allow tuning
the kvm-pit properties via -global.

Also add the QEMU_CAPS_KVM_PIT_TICK_POLICY to the clock-catchup
tests, since expecting it to succeed with QEMU that does not
have kvm-pit makes no sense.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Enable the TPM CRB to be specified in the domain XML. This
now allows to describe the TPM device like this:

  <tpm model='tpm-crb'>
    <backend type='passthrough'>
      <device path='/dev/tpm0'/>
    </backend>
  </tpm>

Extend the XML schema to also allow tpm-crb.
Extend the documentation.
Add a test case for testing the XML parser and formatter.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Even though we just introduced the rom.enabled attribute to
properly cover the use case, there might be guests out there
that use the only previously available way of disabling PCI
ROM loading by not opting in to schema validation.

To make sure such guests will keep working going forward,
introduce a test case covering the legacy workaround.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The attribute can be used to disable ROM loading completely
for a device.

This might be needed because, even when the guest is configured
such that the PCI ROM will not be loaded in the PCI BAR, some
hypervisors (eg. QEMU) might still make it available to the
guest in a form (eg. fw_cfg) that some firmwares (eg. SeaBIOS)
will consume, thus not achieving the desired result.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1425058Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Delete the negative test cases now that they always pass.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Fixed-up-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Implied by QEMU >= 1.2.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

This makes qemuDomainSupportsNetdev identical to
qemuDomainSupportsNicdev and leaves some code in
qemuDomainAttachNetDevice to be cleaned up later.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Supported since QEMU 0.13, but we require QEMU 1.5.0.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

When virDomainObjParseFile runs, it returns a locked @obj with
one reference. Rather than just use virObjectUnref to clean that
up, use virObjectEndAPI.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Now that support for the pcie-to-pci-bridge controller has
been implemented, adding the QEMU_CAPS_DEVICE_PCIE_PCI_BRIDGE
capability to the existing test is enough to cause the guest
to use pcie-to-pci-bridge instead of dmi-to-pci-bridge.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This test shows what happens when you add a traditional PCI
device such as pci-serial to a pure PCIe machine type such
as aarch64/virt.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.

Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>

QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: NFarhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

We're going to use the same test case to exercise all optional
pSeries features, so a more generic name is needed.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

The testCompareDomXML2XMLPreFormatCallback is no longer used and thus
can be removed.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Now that the better approach is in place we can remove the old functions
doing the fake formatting.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add new approach to properly test status XML files by supplying a full
XML file rather than generating synthetic test cases by prepending the
status header. The two tests introduced here are copies of existing
cases using the synthetic header so that current level of testing is
kept. The files are chosen to excercising the vcpu and blockjob quirks
present in the current testing.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Nobody should use format detection due to security implications. The
result of the change is that 'raw' format will be printed unless
specified explicitly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Add a single testcase for the case where format probing is allowed.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

Give them better names and remove some redundancy.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Move the qemuCaps checks over to qemuDomainControllerDefValidatePCI.

This requires two test updates in order to set the correct capability
bit for an xml2xml test as well as setting up the similar capability
for the pseries memlocktest.