We forgot to do cleanup when lxcContainerMountFSTmpfs
failed to bind fs as read-only.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

If a dir does not exist, raise an immediate error in logs
rather than letting virFileResolveAllLinks fail, since this
gives better error reporting to the user.
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Right now we mount selinuxfs even user namespace is enabled and
ignore the error. But we shouldn't ignore these errors when user
namespace is not enabled.

This patch skips mounting selinuxfs when user namespace enabled.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

If the guest is configured with

    <filesystem type='mount'>
      <source dir='/'/>
      <target dir='/'/>
      <readonly/>
    </filesystem>

Then any submounts under / should also end up readonly, except
for those setup as basic mounts. eg if the user has /home on a
separate volume, they'd expect /home to be readonly, but we
should not touch the /sys, /proc, etc dirs we setup ourselves.

Users can selectively make sub-mounts read-write again by
simply listing them as new mounts without the <readonly>
flag set

    <filesystem type='mount'>
      <source dir='/home'/>
      <target dir='/home'/>
    </filesystem>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the array of basic mounts out of the lxcContainerMountBasicFS
function, to a global variable. This is to allow it to be referenced
by other methods wanting to know what the basic mount paths are.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the unmounting private or useless filesystems for
container to this function.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

The devpts, dev and fuse filesystems are mounted temporarily.
there is no need to export them to container if container shares
the root directory with host.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Fix docs and error message typos in lxc_container.c
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

Right now, securityfs is disallowed to be mounted in non-initial
user namespace, so we must avoid trying to mount securityfs in
a container which has user namespace enabled.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

If booting a container with a root FS that isn't the host's
root, we must ensure that the /dev mount point exists.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The lxcContainerMountFSBlockAuto method can be used to mount the
initial root filesystem, so it cannot assume a prefix of /.oldroot.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If securityfs is available on the host, we should ensure to
mount it read-only in the container. This will avoid systemd
trying to mount it during startup causing SELinux AVCs.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Instead of returning raw errno values, report full libvirt
errors in virCgroupNew* functions.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A couple of places in LXC setup for filesystems did not do
a "goto cleanup" after reporting errors. While fixing this,
also add in many more debug statements to aid troubleshooting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Wire up the new virDomainCreate{XML}WithFiles methods in the
LXC driver, so that FDs get passed down to the init process.

The lxc_container code needs to do a little dance in order
to renumber the file descriptors it receives into linear
order, starting from STDERR_FILENO + 1.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit 75c12564 states that virGetGroupList must not be called
between fork and exec, then commit ee777e99 promptly violated
that for lxc.

Patch originally posted by Eric Blake <eblake@redhat.com>.

Otherwise the container will fail to start if we
enable user namespace, since there is no rights to
do mknod in uninit user namespace.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

lxc driver will use this function to change the owner
of hot added devices.

Move virLXCControllerChown to lxc_container.c and Rename
it to lxcContainerChown.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Since mknod in container is forbidden, we should setup disks
on host side.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

When failing to start a container due to inaccessible root
filesystem path, we did not log any meaningful error. Add a
few debug statements to assist diagnosis
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=964358

POSIX states that multi-threaded apps should not use functions
that are not async-signal-safe between fork and exec, yet we
were using getpwuid_r and initgroups.  Although rare, it is
possible to hit deadlock in the child, when it tries to grab
a mutex that was already held by another thread in the parent.
I actually hit this deadlock when testing multiple domains
being started in parallel with a command hook, with the following
backtrace in the child:

 Thread 1 (Thread 0x7fd56bbf2700 (LWP 3212)):
 #0  __lll_lock_wait ()
     at ../nptl/sysdeps/unix/sysv/linux/x86_64/lowlevellock.S:136
 #1  0x00007fd5761e7388 in _L_lock_854 () from /lib64/libpthread.so.0
 #2  0x00007fd5761e7257 in __pthread_mutex_lock (mutex=0x7fd56be00360)
     at pthread_mutex_lock.c:61
 #3  0x00007fd56bbf9fc5 in _nss_files_getpwuid_r (uid=0, result=0x7fd56bbf0c70,
     buffer=0x7fd55c2a65f0 "", buflen=1024, errnop=0x7fd56bbf25b8)
     at nss_files/files-pwd.c:40
 #4  0x00007fd575aeff1d in __getpwuid_r (uid=0, resbuf=0x7fd56bbf0c70,
     buffer=0x7fd55c2a65f0 "", buflen=1024, result=0x7fd56bbf0cb0)
     at ../nss/getXXbyYY_r.c:253
 #5  0x00007fd578aebafc in virSetUIDGID (uid=0, gid=0) at util/virutil.c:1031
 #6  0x00007fd578aebf43 in virSetUIDGIDWithCaps (uid=0, gid=0, capBits=0,
     clearExistingCaps=true) at util/virutil.c:1388
 #7  0x00007fd578a9a20b in virExec (cmd=0x7fd55c231f10) at util/vircommand.c:654
 #8  0x00007fd578a9dfa2 in virCommandRunAsync (cmd=0x7fd55c231f10, pid=0x0)
     at util/vircommand.c:2247
 #9  0x00007fd578a9d74e in virCommandRun (cmd=0x7fd55c231f10, exitstatus=0x0)
     at util/vircommand.c:2100
 #10 0x00007fd56326fde5 in qemuProcessStart (conn=0x7fd53c000df0,
     driver=0x7fd55c0dc4f0, vm=0x7fd54800b100, migrateFrom=0x0, stdin_fd=-1,
     stdin_path=0x0, snapshot=0x0, vmop=VIR_NETDEV_VPORT_PROFILE_OP_CREATE,
     flags=1) at qemu/qemu_process.c:3694
 ...

The solution is to split the work of getpwuid_r/initgroups into the
unsafe portions (getgrouplist, called pre-fork) and safe portions
(setgroups, called post-fork).

* src/util/virutil.h (virSetUIDGID, virSetUIDGIDWithCaps): Adjust
signature.
* src/util/virutil.c (virSetUIDGID): Add parameters.
(virSetUIDGIDWithCaps): Adjust clients.
* src/util/vircommand.c (virExec): Likewise.
* src/util/virfile.c (virFileAccessibleAs, virFileOpenForked)
(virDirCreate): Likewise.
* src/security/security_dac.c (virSecurityDACSetProcessLabel):
Likewise.
* src/lxc/lxc_container.c (lxcContainerSetID): Likewise.
* configure.ac (AC_CHECK_FUNCS_ONCE): Check for setgroups, not
initgroups.
Signed-off-by: NEric Blake <eblake@redhat.com>

Recent changes uncovered a NEGATIVE_RETURNS in the return from sysconf()
when processing a for loop in virtTestCaptureProgramExecChild() in
testutils.c

Code review uncovered 3 other code paths with the same condition that
weren't found by Covirity, so fixed those as well.

these parameters shouldn't be marked as ATTRIBUTE_UNUSED.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Create parent directroy for hostdev automatically when we
start a lxc domain or attach a hostdev to a lxc domain.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

This helper function is used to create parent directory for
the hostdev which will be added to the container. If the
parent directory of this hostdev doesn't exist, the mknod of
the hostdev will fail. eg with /dev/net/tun
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

We forgot to free the stack when Kernel doesn't
support user namespace.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Add some debug logging of LXC wait/continue messages
and uid/gid map update code.

User namespaces will deny the ability to mount the SELinux
filesystem. This is harmless for libvirt's LXC needs, so the
error can be ignored.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

user namespace doesn't allow to create devices in
uninit userns. We should create devices on host side.

We first mount tmpfs on dev directroy under state dir
of container. then create devices under this dev dir.

Finally in container, mount the dev directroy created
on host to the /dev/ directroy of container.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

This patch introduces new helper function
virLXCControllerSetupUserns, in this function,
we set the files uid_map and gid_map of the init
task of container.

lxcContainerSetID is used for creating cred for
tasks running in container. Since after setuid/setgid,
we may be a new user. This patch calls lxcContainerSetUserns
at first to make sure the new created files belong to
right user.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

User namespace will be enabled only when the idmap exist
in configuration.

If you want disable user namespace,just remove these
elements from XML.

If kernel doesn't support user namespace and idmap exist
in configuration file, libvirt lxc will start failed and
return "Kernel doesn't support user namespace" message.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

...fixes a trivial copy&paste error.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Earlier commit f7e8653f dropped support for using LXC with
kernels having single-instance devpts filesystem from the
LXC controller. It forgot to remove the same code from the
LXC container setup.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

After commit c131525b
"Auto-add a root <filesystem> element to LXC containers on startup"
for libvirt lxc, root must be existent.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

Re-add the selinux header to lxc_container.c since other
functions now use it, beyond the patch that was just
reverted.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This reverts commit 940c6f10.

Before trying to mount the selinux filesystem in a container
use is_selinux_enabled() to check if the machine actually
has selinux support (eg not booted with selinux=0)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>