So we can allow GSSAPI authentication for ssh.
Signed-off-by: NMatthias Witte <witte@netzquadrat.de>

Fix bug #611823 storage driver should prohibit pools with duplicate
underlying storage.

Add internal API virStoragePoolSourceFindDuplicate() to do uniqueness
check based on source location infomation for pool type.

* AUTHORS: add Lei Li

When libvirtd is running at non-root user, it won't create ${HOME}/.libvirt.

It will show error message:
17:44:16.838: 7035: error : virPidFileAcquirePath:322 : Failed to open pid file
Signed-off-by: NXu He Jie <xuhj@linux.vnet.ibm.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

I'd like to change my primary email address to jfehlig@suse.com.
This patch changes it in AUTHORS and .mailmap.

Signed-off-by: NEric Blake <eblake@redhat.com>

pciDeviceListSteal(pcidevs, dev) removes dev from pcidevs reducing
the length of pcidevs, so moving onto what was the next dev is wrong.

Instead callers should pop entry 0 repeatedly until pcidevs is empty.
Signed-off-by: NSteve Hodgson <shodgson@solarflare.com>
Signed-off-by: NShradha Shah <sshah@solarflare.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

A virsh command like:

migrate --live --copy-storage-all Guest qemu+ssh://user@host/system
--persistent --verbose

shows

Migration: [  0 %]

during the storage copy and does not start counting
until the ram transfer starts

Fix this by scraping optional disk transfer status, and adding it
into the progress meter.

The function stop() was always returning 0 (OK) from killproc() even
in case of error.

Replace magic numbers with loglevel variables.
Signed-off-by: NSupriya Kannery <supriyak@in.ibm.com>

Make the command 'virsh snapshot-delete' has the appropriate prompt
message when executing sucessful or failed.

While compiling on F15 build crashed (probably because of new GCC).

Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified.  This won't disable host key
checking for already known hosts.  Includes a test and documentation.

Detected in valgrind run:

==9184== 1 bytes in 1 blocks are definitely lost in loss record 1 of 19
==9184==    at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184==    by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184==    by 0x4CF97C9: xdr_remote_domain_get_security_label_ret (remote_protocol.c:1696)
==9184==    by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184==    by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184==    by 0x4CE3887: call (remote_driver.c:3933)
==9184==    by 0x4CF71C6: remoteDomainGetSecurityLabel (remote_driver.c:1580)
==9184==    by 0x4CCA480: virDomainGetSecurityLabel (libvirt.c:7340)
==9184==    by 0x41993A: cmdDominfo (virsh.c:2414)
==9184==    by 0x411E92: vshCommandRun (virsh.c:12730)
==9184==    by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 2 bytes in 1 blocks are definitely lost in loss record 2 of 19
==9184==    at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184==    by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184==    by 0x4CF974F: xdr_remote_node_get_security_model_ret (remote_protocol.c:1713)
==9184==    by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184==    by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184==    by 0x4CE3887: call (remote_driver.c:3933)
==9184==    by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184==    by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184==    by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184==    by 0x411E92: vshCommandRun (virsh.c:12730)
==9184==    by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 8 bytes in 1 blocks are definitely lost in loss record 3 of 19
==9184==    at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184==    by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184==    by 0x4CF9729: xdr_remote_node_get_security_model_ret (remote_protocol.c:1710)
==9184==    by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184==    by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184==    by 0x4CE3887: call (remote_driver.c:3933)
==9184==    by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184==    by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184==    by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184==    by 0x411E92: vshCommandRun (virsh.c:12730)
==9184==    by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== LEAK SUMMARY:
==9184==    definitely lost: 11 bytes in 3 blocks

* src/remote/remote_driver.c: Avoid leak on remoteDomainGetSecurityLabel
  and remoteNodeGetSecurityModel.

Add libvirt support for MicroBlaze architecture as a QEMU target.  Based on mips/mipsel pattern.
Signed-off-by: NJohn Williams <john.williams@petalogix.com>

add a new API pciDeviceReAttachInit() in pci.c to initialize state values for nodedev reattach

Initialize three state value of device driver to 1. This is just for a new call to
qemudNodeDeviceReAttach()

linux 3.0 has no micro version number, and that is causing problems
for virParseVersionString.  The patch below should allow for:
  major
  major.minor
  major.minor.micro

If major or minor are not present they just default to zero.
We found this in Ubuntu (https://bugs.launchpad.net/bugs/802977)

Parthelper is only compiled if both --with-libvirtd
and --with-storage-disk are set.
Signed-off-by: NRuben Kerkhof <ruben@rubenkerkhof.com>

This patch adds documentation about the 802.1Qbh related parameters
of the virtualport element for 'direct' interfaces.
Signed-off-by: NDavid S. Wang <dwang2@cisco.com>
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com>

Introduce libvirt support for Xen HVM Viridian (Hyper-V) enlightenment
interface guest feature.

 src/conf/domain_conf.c     |    3 ++-
 src/conf/domain_conf.h     |    1 +
 src/xen/xen_hypervisor.c   |   11 +++++++++++
 src/xenapi/xenapi_driver.c |    2 ++
 src/xenapi/xenapi_utils.c  |    2 ++
 src/xenxs/xen_sxpr.c       |    4 ++++
 src/xenxs/xen_xm.c         |   12 +++++++++++-
 7 files changed, 33 insertions(+), 2 deletions(-)

Drivers load running persistent and transient domain configs before
inactive persistent domain configs, however only the latter would set a
domain's autostart flag. This mismatch between the loaded and on-disk
state could later cause problems with "virsh autostart":

  # virsh autostart example
  error: Failed to mark domain example as autostarted
  error: Failed to create symlink '/etc/libvirt/qemu/autostart/example.xml to '/etc/libvirt/qemu/example.xml': File exists

This patch ensures the autostart flag is set correctly even when the
domain is already defined.

Fixes:

  https://bugzilla.redhat.com/show_bug.cgi?id=632100
  https://bugzilla.redhat.com/show_bug.cgi?id=675319Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

Added:
* Virt ruby bindings
* Foreman for provisioning and webui.

Signed-off-by: NNeil Wilson <neil@aldur.co.uk>

I have been finding that some UML command line networking parameters are
being generated incorrectly.

For more information, see
https://bugzilla.redhat.com/show_bug.cgi?id=706295 .

As reported by Diego Blanco in

  https://bugzilla.redhat.com/show_bug.cgi?id=702602

commit f0443765 which replaced openvz_readline to getline(3)
broke OpenVZ driver as it changed semantics of EOF-handling
when parsing OpenVZ configuration.

There're several other issues reported with current OpenVZ driver:

 #1: unclear error message when parsing "CPUS=" line
 #2: openvz driver goes into crashing loop
 #3: "NETIF=" line in configuration is not parsed correctly
 #4: aborts even when optional parameter is missing
 #5: there's a potential memory leak

This updated patch to fix #[145]. This patch does not fix #[23]
as I haven't verified these yet, but this at least got me to run
OpenVZ on libvirt once again.

Originally most of libvirt domain-specific calls were blocking
during a migration.
A new mechanism to allow specific calls (blkstat/blkinfo) to be
executed in such condition has been implemented.
In the long term it'd be desirable to get a more general
solution to mark further APIs as migration safe, without needing
special case code.

 * src/qemu/qemu_migration.c: add some additional job signal
   flags for doing blkstat/blkinfo during a migration
 * src/qemu/qemu_domain.c: add a condition variable that can be
   used to efficiently wait for the migration code to clear the
   signal flag
 * src/qemu/qemu_driver.c: execute blkstat/blkinfo using the
   job signal flags during migration

When using TLS authentication and operating as the non-root user,
initially attempt to use that specific user's TLS certificates before
attempting to use the system wide TLS certificates.
Signed-off-by: NDoug Goldstein <cardoe@cardoe.com>

starting with kernel 2.6.38 macvtap supports a 'passthru' mode for
attaching virtual functions of a SRIOV capable network card directly to a VM.
This patch adds the capability to configure such a device.
Signed-off-by: NDirk Herrendoerfer <d.herrendoerfer@herrendoerfer.name>

Users often edit XML file stored in configuration directory
thinking of modifying a domain/network/pool/etc. Thus it is wise
to let them know they are using the wrong way and give them hint.

Commit 36deff04 introduced a regression due to which virsh is not able
to log to a file - msg_buf was changed from an array to a pointer
without corresponding change to usage of "sizeof()".

Fix regression in virsh logging
Signed-off-by: NSupriya Kannery <supriyak@in.ibm.com>

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=664059

Reattaching pci device back to host without destroying guest or
detaching device from guest would cause host to crash. This patch adds
a check before doing device reattach. If the device is being assigned
to guest, libvirt refuses to reattach device to host. The patch only
works for Xen, for it just checks xenstore to get pci device
information.
Signed-off-by: NYufang Zhang <yuzhang@redhat.com>

They don't make any sense when used together.

Allow libvirt-guests to stage a delay between guest startups,
to avoid system load caused by back-to-back startup.

gcc 4.6 warns when a variable is initialized but isn't used afterwards:

vmware/vmware_driver.c:449:18: warning: variable 'vmxPath' set but not used [-Wunused-but-set-variable]

This patch fixes these warnings. There are still 2 offending files:

- vbox_tmpl.c: the variable is used inside an #ifdef and is assigned several
  times outside of #ifdef. Fixing the warning would have required wrapping
  all the assignment inside #ifdef which hurts readability.

vbox/vbox_tmpl.c: In function 'vboxAttachDrives':
vbox/vbox_tmpl.c:3918:22: warning: variable 'accessMode' set but not used [-Wunused-but-set-variable]

- esx_vi_types.generated.c: the name implies it's generated code and I
  didn't want to dive into the code generator

esx/esx_vi_types.generated.c: In function 'esxVI_FileQueryFlags_Free':
esx/esx_vi_types.generated.c:1203:3: warning: variable 'item' set but not used [-Wunused-but-set-variable]

This patch enables the relative backing file path support provided by
qemu-img create.

If a relative path is specified for the backing file, it is converted
to an absolute path using the storage pool path. The absolute path is
used to verify that the backing file exists. If the backing file exists,
the relative path is allowed and will be provided to qemu-img create.

Currently libvirt's default logging is limited and it is difficult to
determine what was happening when a proglem occurred (especially on a
machines where one don't know the detail.)  This patch helps to do that
by making additional logging available for the following events:

  creating/defining/undefining domains
  creating/defining/undefining/starting/stopping networks
  creating/defining/undefining/starting/stopping storage pools
  creating/defining/undefining/starting/stopping storage volumes.

* AUTHORS: add Naoya Horiguchi
* src/network/bridge_driver.c src/qemu/qemu_driver.c
  src/storage/storage_driver.c: provide more VIR_INFO logging

* AUTHORS: Update, to satisfy 'make syntax-check'.

Wen Congyang gained commiter access

Created a new section of previous commiters to the project
but not involved much anymore: Karel Zak, Atsushi SAKAI,
Dave Leskovec and Dan Smith