Commit 21373feb added support for primary virtio-vga device but it was
checking for virtio-gpu.  Let's check for existence of virtio-vga if we
want to use it.

Virtio video device is currently represented by three different models
*virtio-gpu-device*, *virtio-gpu-pci* and *virtio-vga*.  The first two
models are tied together and if virtio video devices is compiled in they
both exist.  However, the *virtio-vga* model doesn't have to exist on
some architectures even if the first two models exist.  So we cannot
group all three together.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

We generally uses QEMU_CAPS_DEVICE_$NAME to probe for existence of some
device and QEMU_CAPS_$NAME_$PROP to probe for existence of some property
of that device.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

If QEMU in question supports QMP, this capability is set if
QEMU_CAPS_DEVICE_QXL was set based on existence of "-device qxl". If
libvirt needs to parse *help*, because there is no QMP support, it
checks for existence of "-vga qxl", but it also parses output of
"-device ?" and sets QEMU_CAPS_DEVICE_QXL too.

Now that libvirt supports only QEMU that has "-device" implemented it's
safe to drop this capability and stop using it.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This patch simplifies QEMU capabilities for QXL video device.  QEMU
exposes this device as *qxl-vga* and *qxl* and they are both the same
device with the same set of parameters, the only difference is that
*qxl-vga* includes VGA compatibility.

Based on QEMU code they are tied together so it's safe to check only for
presence of only one of them.

This patch also removes an invalid test case "video-qxl-sec-nodevice"
where there is only *qxl-vga* device and *qxl* device is not present.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

The intel-iommu device has existed since QEMU 2.2.0, but
it was only possible to create it with -device since
QEMU 2.7.0, thanks to:

  commit 621d983a1f9051f4cfc3f402569b46b77d8449fc
  Author: Marcel Apfelbaum <marcel@redhat.com>
  Date:   Mon Jun 27 18:38:34 2016 +0300

    hw/iommu: enable iommu with -device

    Use the standard '-device intel-iommu' to create the IOMMU device.
    The legacy '-machine,iommu=on' can still be used.

The libvirt capability check & command line formatting code
is thus broken for all QEMU versions 2.2.0 -> 2.6.0 inclusive.

This fixes it to use iommu=on instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qemucapsprobe helper calls virQEMUCapsNewForBinaryInternal with
caps == NULL, causing the following crash:

    Program received signal SIGSEGV, Segmentation fault.
    #0  0x00007ffff788775f in virQEMUCapsInitHostCPUModel
        (qemuCaps=qemuCaps@entry=0x649680, host=host@entry=0x10) at
        src/qemu/qemu_capabilities.c:2969
    #1  0x00007ffff7889dbf in virQEMUCapsNewForBinaryInternal
        (caps=caps@entry=0x0, binary=<optimized out>,
        libDir=libDir@entry=0x4033f6 "/tmp", cacheDir=cacheDir@entry=0x0,
        runUid=runUid@entry=4294967295, runGid=runGid@entry=4294967295,
        qmpOnly=true) at src/qemu/qemu_capabilities.c:4039
    #2  0x0000000000401702 in main (argc=2, argv=0x7fffffffd968) at
        tests/qemucapsprobe.c:73

Caused by v2.2.0-182-g68c70118.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It really doesn't belong to the generic CPU driver.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The domain capabilities XML is capable of showing whether each guest CPU
mode is supported or not with a possibility to provide additional
details. This patch enhances host-model capability to advertise the
exact CPU model which will be used as a host-model:

    <cpu>
        ...
        <mode name='host-model' supported='yes'>
            <model fallback='allow'>Broadwell</model>
            <vendor>Intel</vendor>
            <feature policy='disable' name='aes'/>
            <feature policy='require' name='vmx'/>
        </mode>
        ...
    </cpu>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Host capabilities provide libvirt's view of the host CPU, but for a
useful support for host-model CPUs we really need a hypervisor's view of
the CPU. And since the view can be differ with emulator, qemu
capabilities is the best place to store the host CPU model.

This patch just copies the CPU model from host capabilities, but this
will change in the future.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

In case a hypervisor is able to tell us a list of supported CPU models
and whether each CPU models can be used on the current host, we can
propagate this to domain capabilities. This is a better alternative
to calling virConnectCompareCPU for each supported CPU model.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Listing all CPU models supported by QEMU in domain capabilities makes
little sense when libvirt will refuse any model it doesn't know about.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

To have a single place where we decide whether a guest can run natively
on a host.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

qemuCaps->arch should match the guest architecture from domain XML.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The list of supported CPU models in domain capabilities is stored in
virDomainCapsCPUModels. Let's use the same object for storing CPU models
in QEMU capabilities.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Just like in the previous commit, teach qemu driver to detect
whether qemu supports this configuration knob or not.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

QEMU reports whether 'query-hotpluggable-cpus' is supported for a given
machine type. Extract and cache the information using the capability
cache.

When copying the capabilities for a new start of qemu, mask out the
presence of QEMU_CAPS_QUERY_HOTPLUGGABLE_CPUS if the machine type
doesn't support hotpluggable cpus.

Check whether the disable-legacy property is present on the following
devices:
  virtio-balloon-pci
  virtio-blk-pci
  virtio-scsi-pci
  virtio-serial-pci
  virtio-9p-pci
  virtio-net-pci
  virtio-rng-pci
  virtio-gpu-pci
  virtio-input-host-pci
  virtio-keyboard-pci
  virtio-mouse-pci
  virtio-tablet-pci

Assuming that if QEMU knows other virtio devices where this property
is applicable, it will have at least one of these devices.

Added in QEMU by:
commit e266d421490e0ae83044bbebb209b2d3650c0ba6
    virtio-pci: add flags to enable/disable legacy/modern

The first argument should be const char ** instead of
char **, because this is a search function and as such it
doesn't, and shouldn't, alter the haystack in any way.

This change means we no longer have to cast arrays of
immutable strings to arrays of mutable strings; we still
have to do the opposite, though, but that's reasonable.

Doing a load, copy, format cycle on all QEMU capabilities XML files
should make sure we don't forget to update virQEMUCapsNewCopy when
adding new elements to QEMU capabilities.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NBoris Fiuczynski <fiuczy@linux.vnet.ibm.com>

Since its release of 2.4.0 qemu is able to enable System
Management Module in the firmware, or disable it. We should
expose this capability in the XML. Unfortunately, there's no good
way to determine whether the binary we are talking to supports
it. I mean, if qemu's run with real machine type, the smm
attribute can be seen in 'qom-list /machine' output. But it's not
there when qemu's run with -M none. Therefore we're stuck with
version based check.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Use a temporary pointer rather than always recalculating the index in a
very verbose way.

Add a structure to store the data and use a single array of the
structures rather than having 3 separate arrays with shared indexes.

Purely cosmetic change to be consistent with the other names.
Signed-off-by: NHenning Schild <henning.schild@siemens.com>

Check whether QEMU supports -device intel-iommu

Note that the presence of this option does not mean that it's
usable because of a bug in earlier QEMU versions, but it's
better than nothing.

https://bugzilla.redhat.com/show_bug.cgi?id=1235580

An error in virHostCPUGetKVMMaxVCPUs() means we've been unable
to access /dev/kvm, or we're running on a platform that doesn't
support KVM in the first place.

If that's the case, we shouldn't ignore the error and report
domcapabilities even though we know the user won't be able to
start any KVM guest.

Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50
prior to 0.12.0, our minimum supported qemu version.

$ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62
v0.11.0-rc0-449-gdc6b1c0
$ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab
v0.12.0-rc0~1477

Add a new capability for the -display command line option, which has
been present since QEMU 1.0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

virttype is already included in domCaps, no need to pass it separately.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The qemu limit and host limit both should be considered for
the domain vcpu max limits.
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>

Unfortunately, we can't just call qemuDomainMachineIsPSeries()
here, because we don't have a virDomainDef instance; that said,
the open-coded check should match said function as closely as
possible.