The blockjob module uses 'qemuDomainAsyncJob' in it's public headers.
As I plan adding a new structure containing job data which will need to
be included in "qemu_domain.h" it's necessary to break the circular
dependency.

Convert 'qemuDomainAsyncJob' type to 'int' as it's an enum.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All the public APIs of the qemu_blockjob module operate on a 'disk'.
Since I'll be adding APIs which operate on a job later let's rename the
existing ones.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function is now only called locally. Some code movement was
necessary to avoid forward declarations.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Replace use of qemuBlockJobEventProcess with the general helper. A small
tweak is required to pass in the 'type' and 'status' of the job via the
appropriate private data variables.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The event reports the disk path to identify the disk which makes sense
only for local disks. Additionally network backed disks like NBD don't
need to have a path so the callback would return NULL.

Report VIR_DOMAIN_EVENT_ID_BLOCK_JOB only for non-empty local disks.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Put the emitting of VIR_DOMAIN_EVENT_ID_BLOCK_JOB and
VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2 into a separate function.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Instead of copying the default default values upfront
and then wondering whether the user has given us a new default,
leave the per-usage TLS certdirs and secrets empty during
parsing and only fill them afterwards if they weren't provided
by the user.

This means that instead of looking whether the specific certdir
paths match the default default, the Validate function (which
is called in between parsing and setting the defaults) can error
out for missing directories if the value is present, because
it must've come from the user.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a set of bool variables with the 'present' suffix
to track whether the value was actually specified.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

They are meant to be together.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

These all contain the same copy and pasted '@disk' error,
and only repeat the list of arguments.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Turns out, that there are few bugs that are not that trivial to
fix (e.g. around block jobs). Instead of rushing in not
thoroughly tested fixes disable the feature temporarily for the
release.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
ACKed-by: NPeter Krempa <pkrempa@redhat.com>

When commit 1d94b3e7 added code to walk the [n]hostdevs list looking
to add shared hostdevs, it should've filtered any hostdevs that were
not SCSI hostdev's.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The session daemon is unable to set XATTRs in 'trusted'
namespace because it doesn't run as privileged process.
Therefore, when creating the default qemu config enable
rememberOwner only when running as privileged process.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Since its introduction in commit 0977b8aa (released in v1.2.14)
qemuAgentGetInterfaces calls qemuAgentCommand with needReply=false,
which allows qemuAgentCommand to return 0 even when it did not get
any reply from the agent.

Set needReply to true, since we dereference it right after.

This can be hit if libvirt is waiting for an event from the agent
(e.g. shutdown) and the agent cannot reply in time (e.g. due to
the guest being shut down), as reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=1663051Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Three lines are a bit off there.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

In the previous commit we are using uint64_t for storing subnet
prefix and interface id that qemu reports in
RDMA_GID_STATUS_CHANGED event. We also report them in some debug
messages. This poses a problem because uint64_t can be UL or ULL
depending on the host architecture and hence we wouldn't know
which format to use. Switch to ULL which is big enough and
doesn't suffer from the issue.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This event is emitted on the monitor when a GID table in pvrdma device
is modified and the change needs to be propagate to the backend RDMA
device's GID table.

The control over the RDMA device's GID table is done by updating the
device's Ethernet function addresses.
Usually the first GID entry is determine by the MAC address, the second
by the first IPv6 address and the third by the IPv4 address. Other
entries can be added by adding more IP addresses. The opposite is the
same, i.e. whenever an address is removed, the corresponding GID entry
is removed.

The process is done by the network and RDMA stacks. Whenever an address
is added the ib_core driver is notified and calls the device driver's
add_gid function which in turn update the device.

To support this in pvrdma device we need to hook into the create_bind
and destroy_bind HW commands triggered by pvrdma driver in guest.
Whenever a changed is made to the pvrdma device's GID table a special
QMP messages is sent to be processed by libvirt to update the address of
the backend Ethernet device.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These were not caught by our current regular expressions
but will be caught by the improved ones we're about to
introduce, so fix them ahead of time.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

According to the result parsing from xml, add the unarmed property
into QEMU command line:

-device nvdimm,...[,unarmed=on]
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

According to the result parsing from xml, add pmem property
into QEMU command line:

-object memory-backend-file,...[,pmem=on]
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

According to the result parsing from xml, add align property
into QEMU command line:

-object memory-backend-file,...[,align=xxx]
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability tracks if memory-backend-file has the pmem
attribute or not.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: NLuyao Zhong <luyao.zhong@intel.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Before launching a SEV guest we take the base64-encoded guest owner's
data specified in launchSecurity and create files with the same content
under /var/lib/libvirt/qemu/<domain>. The reason for this is that we
need to pass these files on to QEMU which then uses them to communicate
with the SEV firmware, except when it doesn't have permissions to open
those files since we don't relabel them.

https://bugzilla.redhat.com/show_bug.cgi?id=1658112Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Since SEV operates on a per domain basis, it's very likely that all
SEV launch-related data will be created under
/var/lib/libvirt/qemu/<domain_name>. Therefore, when calling into
qemuProcessSEVCreateFile we can assume @libDir as the directory prefix
rather than passing it explicitly.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

Because missing optional storage source is not error. The patch
address only local files. Fixing other cases is a bit ugly.
Below is example of error notice in log now:

error: virStorageFileReportBrokenChain:427 :
   Cannot access storage file '/path/to/missing/optional/disk':
  	No such file or directory
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Every time we call all domain stats for inactive domain with
unavailable storage source we get error message in logs [1]. It's a bit noisy.
While it's arguable whether we need such message or not for mandatory
disks we would like not to see messages for optional disks. Let's
filter at least for cases of local files. Fixing other cases would
require passing flag down the stack to .backendInit of storage
which is ugly.

Stats for active domain are fine because we either drop disks
with unavailable sources or clean source which is handled
by virStorageSourceIsEmpty in qemuDomainGetStatsOneBlockFallback.

We have these logs for successful stats since 25aa7035 (version 1.2.15)
which in turn fixes 596a1371 (version 1.2.12 )which added substantial
stats for offline disks.

[1] error message example:
qemuOpenFileAs:3324 : Failed to open file '/path/to/optional/disk': No such file or directory
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

Introduce caching whether /dev/kvm is usable as the QEMU user:QEMU
group. This reduces the overhead of the QEMU capabilities cache
lookup. Before this patch there were many fork() calls used for
checking whether /dev/kvm is accessible. Now we store the result
whether /dev/kvm is accessible or not and we only need to re-run the
virFileAccessibleAs check if the ctime of /dev/kvm has changed.
Suggested-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.

An example log file entry now looks like this:

  2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
  LC_ALL=C \
  PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
  HOME=/home/berrange \
  USER=berrange \
  LOGNAME=berrange \
  QEMU_AUDIO_DRV=none \
  /usr/bin/qemu-system-ppc64 \
  -name guest=guest,debug-threads=on \
  -S \
  -object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
  -machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
  -m 1024 \
  -realtime mlock=off \
  -smp 1,sockets=1,cores=1,threads=1 \
  -uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
  -display none \
  -no-user-config \
  -nodefaults \
  -chardev socket,id=charmonitor,fd=23,server,nowait \
  -mon chardev=charmonitor,id=monitor,mode=control \
  -rtc base=utc \
  -no-shutdown \
  -boot strict=on \
  -device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
  -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
  -sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
  -msg timestamp=on
  2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

This introduces a syntax-check script that validates header files use a
common layout:

  /*
   ...copyright header...
   */
  <one blank line>
  #ifndef SYMBOL
  # define SYMBOL
  ....content....
  #endif /* SYMBOL */

For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:

  #ifndef SYMBOL_ALLOW
  # error ....
  #endif /* SYMBOL_ALLOW */
  <one blank line>

The many mistakes this script identifies are then fixed.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: NErik Skultety <eskultet@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Support for nested KVM is handled via a kernel module configuration
parameters values for kvm_intel, kvm_amd, kvm_hv (PPC), or kvm (s390).
While it's possible to fetch the kmod config values via virKModConfig,
unfortunately that is the static value and we need to get the
current/dynamic value from the kernel file system.

So this patch adds a new API virHostKVMSupportsNesting that will
search the 3 kernel modules to get the nesting value and check if
it is 'Y' (or 'y' just in case) to return a true/false whether
the KVM kernel supports nesting.

We need to do this in order to handle cases where adjustments to
the value are made after libvirtd is started to force a refetch of
the latest QEMU capabilities since the correct CPU settings need
to be made for a guest to add the "vmx=on" to/for the guest config.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1624223

There are two ways to request memory preallocation on cmd line:
-mem-prealloc and .prealloc attribute for a memory-backend-file.
However, as it turns out it's not safe to use both at the same
time. If -mem-prealloc is used then qemu will fully allocate the
memory (this is done by actually touching every page that has
been allocated). Then, if .prealloc=yes is specified,
mbind(flags = MPOL_MF_STRICT | MPOL_MF_MOVE) is called which:

a) has to (possibly) move the memory to a different NUMA node,
b) can have no effect when hugepages are in play (thus ignoring user
request to place memory on desired NUMA nodes).

Prefer -mem-prealloc as it is more backward compatible
compared to switching to "-numa node,memdev=  + -object
memory-backend-file".
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

So far we have two arguments that we are passing to
qemuBuildMemoryBackendProps() and that are taken from domain
private data: @qemuCaps and @autoNodeset. In the next commit I
will use one more item from there. Therefore, instead of having
it as yet another argument to the function, pass pointer to the
private data object.

There is one change in qemuDomainAttachMemory() where previously
@autoNodeset was NULL but now is priv->autoNodeset (which may be
set). This is safe to do as @autoNodeset is advisory only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>