Validate that users don't try to disable vcpu 0.

Vcpu order is required to stay sequential. Clear the order on cpu
coldplug to avoid issues with removing vcpus out of sequence.

'next' is declared as 'ssize_t' so use '%zd'

Buggy condition meant that vcpu0 would not be iterated in the checks.
Since it's not hotpluggable anyways we would not be able to break the
configuration of a live VM.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1437013

Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431Signed-off-by: NErik Skultety <eskultet@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1371892

The 'capacity' value (e.g. guest logical size) for a LUKS volume is
smaller than the 'physical' value of the file in the file system, so
we need to account for that.

When peeking at the encryption information about the volume add a fetch
of the payload_offset which is described as the offset to the start of
the volume data (in 512 byte sectors) in QEMU's QCryptoBlockLUKSHeader.

Then adjust the ->capacity appropriately when we determine that the
volume target encryption has a payload_offset value.

Add check for more than one RTA_OIF, even though this is rather
unlikely.

Get rid of the buggy switch / break as this code won't need to
handle more attributes.

Use VIR_WARNINGS_NO_CAST_ALIGN to fix impossible to fix
util/virnetdevip.c:560:17: error: cast increases required alignment of target type [-Werror=cast-align]

Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.

Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.

Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.

So far, libvirt has assumed that only x86 supports ACPI,
but that's inaccurate since aarch64 supports it too.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1429509

The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.

This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.

Instead of having a single function that probes the
architecture from the monitor and then sets a bunch of
basic capabilities based on it, have a separate function
for each part: virQEMUCapsInitQMPArch() only sets the
architecture, and virQEMUCapsInitQMPBasicArch() only sets
the capabilities.

This split will be useful later on, when we will want to
set basic capabilities from the test suite without having
to go through the pain of mocking the monitor.

If a transient storage pool is deemed inactive after libvirtd restart it
would not be deleted from the list. Reuse virStoragePoolUpdateInactive
along with a refactor necessary to properly update the state.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242801

After a pool is made inactive the definition objects need to be updated
(if a new definition is prepared) and transient pools need to be
completely removed. Split out the code doing these steps into a separate
function for later reuse.

When registering a storage poll backend, the code would use
virStorageTypeToString instead of virStoragePoolTypeToString. The
following message would be logged:

virDriverLoadModuleFunc:71 : Lookup function 'virStorageBackendSCSIRegister'
virStorageBackendRegister:174 : Registering storage backend '(null)'

Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.

So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

The virMacMap module is there for dumping [domain, <list of is
MACs>] pairs into a file so that libvirt_guest NSS module can use
it. Whenever a interface is allocated from network (e.g. on
domain<F2> startup or NIC hotplug), network is notified and so is
virMacMap module subsequently. The module update functions
networkMacMgrAdd() and networkMacMgrDel() gracefully handle the
case when there's no module. The problem is, the module is
created if and only if network is freshly started, or if the
daemon restarts and network previously had the module.

This is not very user friendly - if users want to use the NSS
module they need to destroy their network and bring it up again
(and subsequently all the domains using it).

One disadvantage of this approach implemented here is that one
may get just partial results: any already running network does
not record mac maps, thus only newly plugged domains will be
stored in the module. The network restart scenario is not touched
by this of course. But one can argue that older libvirts had
never recorded the mac maps anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

So far our code is full of the following pattern:

  dom = virGetDomain(conn, name, uuid)
  if (dom)
      dom->id = 42;

There is no reasong why it couldn't be just:

  dom = virGetDomain(conn, name, uuid, id);

After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

that is: s/hyperyVerifyResponse/hypervVerifyResponse/

https://bugzilla.redhat.com/show_bug.cgi?id=1389313Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

There was an unhandled 'open' call which resulted in:

"error: Library function returned error but did not set virError"

Even if this happens during the daemon's start when we still don't have
any set of outputs defined yet, we can safely report an error, since we
automatically fallback to stderr which is fine even for both
running as a daemonized process, since this happens before the daemon
forks into the background, and running as a systemd service, since
systemd re-directs std outputs to journald by default.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436060Signed-off-by: NErik Skultety <eskultet@redhat.com>

In 9e246583 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

CPU features which change their value from disabled to enabled between
two calls to query-cpu-model-expansion (the first with no extra
properties set and the second with 'migratable' property set to false)
can be marked as enabled and non-migratable in qemuMonitorCPUModelInfo.

Since the code consuming qemuMonitorCPUModelInfo currently ignores the
migratable flag, this change is effectively changing the CPU model
advertised in domain capabilities to contain all features (even those
which block migration). And this matches what we do for QEMU older than
2.9.0, when we detect all CPUID bits ourselves without asking QEMU.

As a result of this change

    <cpu mode='host-model'>
      <feature name='invtsc' policy='require'/>
    </cpu>

will work with all QEMU versions. Such CPU definition would be forbidden
with QEMU >= 2.9.0 without this patch.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When idx is 0 virStorageFileChainLookup returns the base (bottom) of the
backing chain rather than the top. This is expected by the callers of
qemuDomainGetStorageSourceByDevstr.

Add a special case for idx == 0

Since commit fcbbb289 we steal the pointer to the storage pool
source name if there was no pool name specified.

Properly duplicate the string to avoid freeing it twice.

https://bugzilla.redhat.com/show_bug.cgi?id=1436400

One of the problems with our virGetDomain function is that it
copies just domain name and domain UUID. Therefore it's very
easy to forget aboud domain ID. This can cause some bugs, like
virConnectGetAllDomainStats not reporting proper domain IDs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1434882

Imagine the following scenario:

1) virsh net-start default
2) virsh start myFavouriteDomain
3) virsh net-destroy default
4) virsh destroy myFavouriteDomain

(assuming myFavouriteDomain has an interface from default
network)

Regardless of how unlikely this scenario looks like, we should
not crash. The problem is, on net-destroy in
networkShutdownNetworkVirtual() the virMacMap module is unrefed,
but the stale pointer is kept around. Thus when the domain
destroy procedure comes in, networkReleaseActualDevice() and
subsequently networkMacMgrDel() is called. This function sees the
stale pointer and starts calling the virMacMap module APIs which
work over freed memory.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This reverts commit ca4515d2
which also included a functional change that broke logical storage pools
not named after their volume groups.

off_t is signed and it's size is the same as long only on 64b archs.
Thus it cannot be formatted as %lu.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

The value we use internally to represent the lack of a memory
locking limit, VIR_DOMAIN_MEMORY_PARAM_UNLIMITED, doesn't
match the value setrlimit() and prlimit() use for the same
purpose, RLIM_INFINITY, so we have to handle the translation
ourselves.

Partially-resolves: https://bugzilla.redhat.com/1431793

For guests that use <memoryBacking><locked>, our only option
is to remove the memory locking limit altogether.

Partially-resolves: https://bugzilla.redhat.com/1431793

Instead of having a separate function, we can simply return
zero from the existing qemuDomainGetMemLockLimitBytes() to
signal the caller that the memory locking limit doesn't need
to be set for the guest.

Having a single function instead of two makes it less likely
that we will use the wrong value, which is exactly what
happened when we started applying the limit that was meant
for VFIO-using guests to <memoryBacking><locked>-using
guests.

This reverts commit c2e60ad0.

Turns out this check is excessively strict: there are ways
other than <memtune><hard_limit> to raise the memory locking
limit for QEMU processes, one prominent example being
tweaking /etc/security/limits.conf.

Partially-resolves: https://bugzilla.redhat.com/1431793

If if_indextoname is not defined, the whole function using it should
not be defined either.  Add stub to fix build on mingw.

Caused by 5dd60705Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Creating a copy of the definition we want to add in a migration cookie
makes the code cleaner and less prone to memory leaks or double free
errors.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>