- 29 9月, 2010 1 次提交
-
-
由 Eduardo Otubo 提交于
When creating a new gust, the function phypBuildLpar() was not checking for NULL values src/phyp/phyp_driver.c: check the definition arguments to avoid a segmentation fault in phypBuildLpar()
-
- 27 8月, 2010 1 次提交
-
-
由 Eduardo Otubo 提交于
When creating a new domain from XML, the check for an existing domain name should compare the return of the function to a valid LPAR ID (!= -1) and not to error (== -1).
-
- 15 8月, 2010 1 次提交
-
-
由 Eduardo Otubo 提交于
I changed virStorage[Open|Close] to virVIOSDriver[Open|Close] so the network driver can use it - since the network driver deals with Open/Close in the same way.
-
- 06 8月, 2010 1 次提交
-
-
由 Eduardo Otubo 提交于
src/phyp/phyp_driver.c:phypListDomainsGeneric was crashing due to a buffer overflow if any line returned from virRun wasn't <=10 characters. Since virStrToLong_i recognizes any non-numeric as a terminator (not just NULL), there actually is no need to copy the number into a separate string anyway, so this patch eliminates that copy, the fixed length buffer, and therefore the potential to overflow. This change also provided the oppurtunity to eliminate the character counting loop, instead using the return from virStrToLong_i to point past the end of the number, then simply skip the \n to get to the next.
-
- 31 7月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 24 7月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Add the library entry point for the new virDomainQemuMonitorCommand() entry point. Because this is not part of the "normal" libvirt API, it gets its own header file, library file, and will eventually get its own over-the-wire protocol later in the series. Changes since v1: - Go back to using the virDriver table for qemuDomainMonitorCommand, due to linking issues - Added versioning information to the libvirt-qemu.so Changes since v2: - None Changes since v3: - Add LGPL header to libvirt-qemu.c - Make virLibConnError and virLibDomainError macros instead of function calls Changes since v4: - Move exported symbols to libvirt_qemu.syms Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 29 6月, 2010 1 次提交
-
-
由 Eric Blake 提交于
Fix regression introduced in commit a4a28724 - basically, the phyp storage driver should only accept the same URIs that the main phyp driver is willing to accept. Blindly accepting all URIs meant that the phyp storage driver was being consulted for 'virsh -c qemu:///session pool-list --all', rather than the qemu storage driver, then since the URI was not for phyp, attempts to then use the phyp driver crashed because it was not initialized. * src/phyp/phyp_driver.c (phypStorageOpen): Only accept connections already open to a phyp driver.
-
- 25 6月, 2010 5 次提交
-
-
由 Eric Blake 提交于
Minor speedups by using the full power of sed. * src/phyp/phyp_driver.c (phypGetVIOSFreeSCSIAdapter) (phypDiskType, phypListDefinedDomains): Use fewer processes, by folding other work into sed. (phypGetVIOSPartitionID): Likewise. Also avoid non-portable use of 'sed -s'.
-
由 Eduardo Otubo 提交于
Add the storage management driver to the Power Hypervisor driver. This is a big but simple patch, it's just a new set of functions. This patch includes: * Storage driver: The set of pool-* and vol-* functions. * attach-disk function. * Support for IVM on the new functions. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eduardo Otubo 提交于
* src/phyp/phyp_driver.c (phypStorageDriver): New driver. (phypStorageOpen, phypStorageClose): New functions. (phypRegister): Register it. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Several phyp functions are not namespace clean, and had no reason to be exported since no one outside the phyp driver needed to use them. Rather than do lots of forward declarations, I was able to topologically sort the file. So, this patch looks huge, but is really just a matter of marking things static and dealing with the compiler fallout. * src/phyp/phyp_driver.h (PHYP_DRIVER_H): Add include guard. (phypCheckSPFreeSapce): Delete unused declaration. (phypGetSystemType, phypGetVIOSPartitionID, phypCapsInit) (phypBuildLpar, phypUUIDTable_WriteFile, phypUUIDTable_ReadFile) (phypUUIDTable_AddLpar, phypUUIDTable_RemLpar, phypUUIDTable_Pull) (phypUUIDTable_Push, phypUUIDTable_Init, phypUUIDTable_Free) (escape_specialcharacters, waitsocket, phypGetLparUUID) (phypGetLparMem, phypGetLparCPU, phypGetLparCPUGeneric) (phypGetRemoteSlot, phypGetBackingDevice, phypDiskType) (openSSHSession): Move declarations to phyp_driver.c and make static. * src/phyp/phyp_driver.c: Rearrange file contents to provide topological sorting of newly-static funtions (no semantic changes other than reduced scope). (phypGetBackingDevice, phypDiskType): Mark unused, for now.
-
由 Eduardo Otubo 提交于
This is just the indentation, style and cleanup patch.
-
- 18 6月, 2010 1 次提交
-
-
由 Eduardo Otubo 提交于
Use virBuffer* API to conditionally keep the portion of the command line specific to HMC, so that IVM can work. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 17 6月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* src/phyp/phyp_driver.c (phypNumDomainsGeneric): Avoid glob collision by quoting sed argument. (phypDomainSetCPU): Avoid non-portable \+ in sed. (phypGetVIOSPartitionID, phypDiskType, phypListDomainsGeneric) (phypListDefinedDomains): Micro-optimize anchored substitutions.
-
- 15 6月, 2010 1 次提交
-
-
由 Eric Blake 提交于
Persistent domain creation needs the same features as transient domains, but virDomainCreate lacks the flags argument present in virDomainCreateXML. virDomainCreateFlags is already claimed as a public enum, so we have to break convention and expose virDomainCreateWithFlags. * include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add. * src/driver.h (virDrvDomainCreateWithFlags): Internal API. * src/libvirt.c (virDomainCreateWithFlags): Glue public API to driver API. * src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API. * src/esx/esx_driver.c (esxDriver): Add stub for driver. * src/lxc/lxc_driver.c (lxcDriver): Likewise. * src/opennebula/one_driver.c (oneDriver): Likewise. * src/openvz/openvz_driver.c (openvzDriver): Likewise. * src/phyp/phyp_driver.c (phypDriver): Likewise. * src/qemu/qemu_driver.c (qemuDriver): Likewise. * src/remote/remote_driver.c (remote_driver): Likewise. * src/test/test_driver.c (testDriver): Likewise. * src/uml/uml_driver.c (umlDriver): Likewise. * src/vbox/vbox_tmpl.c (Driver): Likewise. * src/xen/xen_driver.c (xenUnifiedDriver): Likewise. * src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
-
- 09 6月, 2010 1 次提交
-
-
由 Eric Blake 提交于
* include/libvirt/libvirt.h.in (virDomainCreateFlags): Add VIR_DOMAIN_START_PAUSED. * src/libvirt.c (virDomainCreateXML): Update documentation. * src/lxc/lxc_driver.c (lxcDomainCreateAndStart): Reject new flag as unimplemented. * src/opennebula/one_driver.c (oneDomainCreateAndStart): Likewise. * src/openvz/openvz_driver.c (openvzDomainCreateXML): Likewise. * src/phyp/phyp_driver.c (phypDomainCreateAndStart): Likewise. * src/qemu/qemu_driver.c (qemudDomainCreate): Likewise. * src/test/test_driver.c (testDomainCreateXML): Likewise. * src/uml/uml_driver.c (umlDomainCreate): Likewise. * src/vbox/vbox_tmpl.c (vboxDomainCreateXML): Likewise. * src/xen/xend_internal.c (xenDaemonCreateXML): Likewise. * src/xenapi/xenapi_driver.c (xenapiDomainCreateXML): Likewise.
-
- 03 6月, 2010 1 次提交
-
-
由 Eduardo Otubo 提交于
-
- 21 5月, 2010 4 次提交
-
-
由 Jim Meyering 提交于
-
由 Jim Meyering 提交于
Run this: git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \ 's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'
-
由 Jim Meyering 提交于
Run this: git grep -l 'VIR_ERROR0\s*("'|xargs perl -pi -e \ 's/(VIR_ERROR0)\s*\((".*?")\)/$1(_($2))/'
-
由 Jim Meyering 提交于
Change VIR_ERROR("%s", "..." to VIR_ERROR0("..." and Change VIR_ERROR("%s", _("...") to VIR_ERROR0(_("...") Use this command: git grep -E -l 'VIR_ERROR\("%s", (_\()?"'|xargs perl -pi -e \ 's/VIR_ERROR\("%s", (_\()?"/VIR_ERROR0($1"/'
-
- 19 5月, 2010 2 次提交
-
-
由 Jim Meyering 提交于
* po/POTFILES.in: Remove src/util/logging.c and src/util/uuid.c. * src/phyp/phyp_driver.c (phypUUIDTable_ReadFile): Correct more VIR_WARN uses, now manually. (phypUUIDTable_Init, phypUUIDTable_Pull): Likewise.
-
由 Jim Meyering 提交于
Run this command: git grep -l 'VIR_WARN("%s", "'|xargs perl -pi -e \ 's/VIR_WARN\("%s", "/VIR_WARN0("/' * src/phyp/phyp_driver.c (phypDomainGetInfo): Perform the above. (phypDomainCreateAndStart, phypUUIDTable_ReadFile): Likewise.
-
- 07 5月, 2010 1 次提交
-
-
由 Eric Blake 提交于
81 patches to gnulib, picks up several new syntax checks. * .gnulib: Update to latest. * .x-sc_prohibit_always_true_header_tests: New file. * bootstrap.conf (gnulib_modules): Add sched. * src/util/processinfo.c (includes): <sched.h> is now guaranteed. * src/network/bridge_driver.c (includes): Drop useless <strings.h>. * src/openvz/openvz_conf.c (includes): Likewise. * src/openvz/openvz_driver.c (includes): Likewise. * src/phyp/phyp_driver.c (includes): Likewise. * src/qemu/qemu_driver.c (includes): Likewise. * src/uml/uml_driver.c (includes): Likewise.
-
- 30 4月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
This defines the internal driver API and stubs out each driver * src/driver.h: Define virDrvDomainGetBlockInfo signature * src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
-
- 07 4月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 06 4月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
and domainIsPersistent. Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 05 4月, 2010 1 次提交
-
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
- 04 4月, 2010 1 次提交
-
-
由 Daniel Veillard 提交于
virDomainManagedSave() is to be run on a running domain. Once the call complete, as in virDomainSave() the domain is stopped upon completion, but there is no restore counterpart as any order to start the domain from the API would load the state from the managed file, similary if the domain is autostarted when libvirtd starts. Once a domain has restarted his managed save image is destroyed, basically managed save image can only exist for a stopped domain, for a running domain that would be by definition outdated data. * include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms: adds the new entry points virDomainManagedSave(), virDomainHasManagedSaveImage() and virDomainManagedSaveRemove() * src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c src/xen/xen_driver.c: add corresponding new internal drivers entry points
-
- 26 3月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
The current virDomainAttachDevice API can be (ab)used to change the media of an existing CDROM/Floppy device. Going forward there will be more devices that can be configured on the fly and overloading virDomainAttachDevice for this is not too pleasant. This patch adds a new virDomainUpdateDeviceFlags() explicitly just for modifying existing devices. * include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags * src/driver.h: Internal API for virDomainUpdateDeviceFlags * src/libvirt.c, src/libvirt_public.syms: Glue public API to driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add stubs for new driver entry point
-
由 Daniel P. Berrange 提交于
The current API for domain events has a number of problems - Only allows for domain lifecycle change events - Does not allow the same callback to be registered multiple times - Does not allow filtering of events to a specific domain This introduces a new more general purpose domain events API typedef enum { VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */ ...more events later.. } int virConnectDomainEventRegisterAny(virConnectPtr conn, virDomainPtr dom, /* Optional, to filter */ int eventID, virConnectDomainEventGenericCallback cb, void *opaque, virFreeCallback freecb); int virConnectDomainEventDeregisterAny(virConnectPtr conn, int callbackID); Since different event types can received different data in the callback, the API is defined with a generic callback. Specific events will each have a custom signature for their callback. Thus when registering an event it is neccessary to cast the callback to the generic signature eg int myDomainEventCallback(virConnectPtr conn, virDomainPtr dom, int event, int detail, void *opaque) { ... } virConnectDomainEventRegisterAny(conn, NULL, VIR_DOMAIN_EVENT_ID_LIFECYCLE, VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback) NULL, NULL); The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast to the generic signature * include/libvirt/libvirt.h.in: Define new APIs for registering domain events * src/driver.h: Internal driver entry points for new events APIs * src/libvirt.c: Wire up public API to driver API for events APIs * src/libvirt_public.syms: Export new APIs * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out new API entries
-
- 20 3月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 17 3月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 08 3月, 2010 1 次提交
-
-
由 Eric Blake 提交于
Prior to this patch, there was an inconsistent mix between GNU and C99. For consistency, and potential portability to other compilers, stick with the C99 vararg macro syntax. * src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/conf/domain_conf.c (virDomainReportError): Likewise. * src/conf/domain_event.c (eventReportError): Likewise. * src/conf/interface_conf.c (virInterfaceReportError): Likewise. * src/conf/network_conf.c (virNetworkReportError): Likewise. * src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise. * src/conf/secret_conf.h (virSecretReportError): Likewise. * src/conf/storage_conf.h (virStorageReportError): Likewise. * src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than GNU vararg macro syntax. * src/esx/esx_driver.c (ESX_ERROR): Likewise. * src/esx/esx_interface_driver.c (ESX_ERROR): Likewise. * src/esx/esx_network_driver.c (ESX_ERROR): Likewise. * src/esx/esx_secret_driver.c (ESX_ERROR): Likewise. * src/esx/esx_storage_driver.c (ESX_ERROR): Likewise. * src/esx/esx_util.c (ESX_ERROR): Likewise. * src/esx/esx_vi.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vmx.c (ESX_ERROR): Likewise. * src/util/hostusb.c (usbReportError): Use C99 rather than GNU vararg macro syntax. * src/util/json.c (virJSONError): Likewise. * src/util/macvtap.c (ReportError): Likewise. * src/util/pci.c (pciReportError): Likewise. * src/util/stats_linux.c (virStatsError): Likewise. * src/util/util.c (virUtilError): Likewise. * src/util/xml.c (virXMLError): Likewise. * src/xen/proxy_internal.c (virProxyError): Use C99 rather than GNU vararg macro syntax. * src/xen/sexpr.c (virSexprError): Likewise. * src/xen/xen_driver.c (xenUnifiedError): Likewise. * src/xen/xen_hypervisor.c (virXenError): Likewise. * src/xen/xen_inotify.c (virXenInotifyError): Likewise. * src/xen/xend_internal.c (virXendError): Likewise. * src/xen/xm_internal.c (xenXMError): Likewise. * src/xen/xs_internal.c (virXenStoreError): Likewise. * src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/datatypes.c (virLibConnError): Likewise. * src/interface/netcf_driver.c (interfaceReportError): Likewise. * src/libvirt.c (virLibStreamError): Likewise. * src/lxc/lxc_conf.h (lxcError): Likewise. * src/network/bridge_driver.c (networkReportError): Likewise. * src/nodeinfo.c (nodeReportError): Likewise. * src/opennebula/one_conf.h (oneError): Likewise. * src/openvz/openvz_conf.h (openvzError): Likewise. * src/phyp/phyp_driver.c (PHYP_ERROR): Likewise. * src/qemu/qemu_conf.h (qemuReportError): Likewise. * src/remote/remote_driver.c (errorf): Likewise. * src/security/security_driver.h (virSecurityReportError): Likewise. * src/test/test_driver.c (testError): Likewise. * src/uml/uml_conf.h (umlReportError): Likewise. * src/vbox/vbox_driver.c (vboxError): Likewise. * src/vbox/vbox_tmpl.c (vboxError): Likewise.
-
- 03 3月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
This provides the internal glue for the driver API * src/driver.h: Internal API contract * src/libvirt.c, src/libvirt_public.syms: Connect public API to driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Stub out entry points
-
由 Daniel P. Berrange 提交于
The internal glue layer for the new pubic API * src/driver.h: Define internal driver API contract * src/libvirt.c, src/libvirt_public.syms: Wire up public API to internal driver API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Stub new entry point
-
- 02 3月, 2010 1 次提交
-
-
由 Jim Meyering 提交于
* src/phyp/phyp_driver.c (phypUUIDTable_Push): Move incr/decr of ptr/nread into the loop where those variables are used. Also, remove "exit" label and just-preceding "goto".
-
- 12 2月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 10 2月, 2010 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 09 2月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
It was used for error reporting only.
-