- 25 2月, 2013 1 次提交
-
-
由 Peter Krempa 提交于
Adds XML parsing and qemu commandline tests for the VirtIO RNG device support.
-
- 08 2月, 2013 4 次提交
-
-
由 Daniel P. Berrange 提交于
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr' do some renaming of various fucntions/variables. All instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To avoid that clashing with the 'qemuCaps' typedef though, rename the latter to virQEMUCaps. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
To enable virCapabilities instances to be reference counted, turn it into a virObject. All cases of virCapabilitiesFree turn into virObjectUnref Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The data files for testing QEMU command line generation are hardcoded to use /etc/pki, so we should explicitly set that in the test case, avoiding the dynamic SYSCONFDIR value. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 John Ferlan 提交于
Valgrind deterimined that fakeSecretGetValue() was using the secret value without checking validity. Returning NULL causes the caller to emit a message and results in failure. Additionally commit 'b090aa7d' changes leaked vncSASLdir and vncTLSx509certdir
-
- 05 2月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
Currently the virQEMUDriverPtr struct contains an wide variety of data with varying access needs. Move all the static config data into a dedicated virQEMUDriverConfigPtr object. The only locking requirement is to hold the driver lock, while obtaining an instance of virQEMUDriverConfigPtr. Once a reference is held on the config object, it can be used completely lockless since it is immutable. NB, not all APIs correctly hold the driver lock while getting a reference to the config object in this patch. This is safe for now since the config is never updated on the fly. Later patches will address this fully. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 25 1月, 2013 1 次提交
-
-
由 Josh Durgin 提交于
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses, so they are often referenced by IP rather than hostname for convenience, or to avoid relying on DNS. Using IPv4 addresses as the host name works already, but IPv6 addresses require rbd-specific escaping because the colon is used as an option separator in the string passed to qemu. Escape these colons, and enclose the IPv6 address in square brackets so it is distinguished from the port, which is currently mandatory. Acked-by: NOsier Yang <jyang@redhat.com> Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>
-
- 09 1月, 2013 1 次提交
-
-
由 John Ferlan 提交于
Coverity determined that 'emulator' could no longer be set and determined the code was dead. Looking through the history, I discovered commit-id ed769e18 removed code originally added by commit-id 9237e955 and further modified by commit-id 6a7e7c4f.
-
- 08 1月, 2013 1 次提交
-
-
由 J.B. Joret 提交于
This is the QEMU backend code for the SCLP console support. It includes SCLP capability detection, QEMU command line generation and a test case. Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com> Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 21 12月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 19 12月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
-
- 17 12月, 2012 2 次提交
-
-
由 Guannan Ren 提交于
The testcase is for testing non-fixed PCI address for primary video device and using video args to -deivce qemu option.
-
由 Guannan Ren 提交于
'-device VGA' maps to '-vga std' '-device cirrus-vga' maps to '-vga cirrus' '-device qxl-vga' maps to '-vga qxl' (there is also '-device qxl' for secondary devices) '-device vmware-svga' maps to '-vga vmware' For qemu(>=1.2), we can use -device to replace -vga for video device. For the primary video device, the patch tries to use 0x2 slot for matching old qemu. If the 0x2 slot is allocated already, the addr property could help for using any available slot. For qemu(< 1.2), we keep using -vga for primary device.
-
- 07 12月, 2012 1 次提交
-
-
由 Osier Yang 提交于
QEMU supports setting vendor and product strings for disk since 1.2.0 (only scsi-disk, scsi-hd, scsi-cd support it), this patch exposes it with new XML elements <vendor> and <product> of disk device.
-
- 29 11月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Remove the obsolete 'qemud' naming prefix and underscore based type name. Introduce virQEMUDriverPtr as the replacement, in common with LXC driver naming style
-
- 27 11月, 2012 1 次提交
-
-
由 Harsh Prateek Bora 提交于
Signed-off-by: NHarsh Prateek Bora <harsh@linux.vnet.ibm.com>
-
- 22 11月, 2012 1 次提交
-
-
由 Ján Tomko 提交于
-
- 06 11月, 2012 1 次提交
-
-
由 Michal Privoznik 提交于
-
- 22 10月, 2012 1 次提交
-
-
由 Doug Goldstein 提交于
Currently it's assumed that qemu always supports VNC, however it is definitely possible to compile qemu without VNC support so we should at the very least check for it and handle that correctly.
-
- 18 10月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch adds QEMU support for the "relaxed" feature implemented by previous patch.
-
- 16 10月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Add test for 280b8c9e.
-
- 09 10月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
When both kvmclock and kvm_pv_eoi are configured (either disabled or enabled) libvirt will generate invalid CPU specification due to the fact that even though kvmclock causes the CPU to be specified, it doesn't set have_cpu flag to true (and the new kvm_pv_eoi as well). This patch fixes the issue and adds a test exactly for that to show that it is fixed correctly (and also to keep it that way in the future of course).
-
- 27 9月, 2012 3 次提交
-
-
由 Daniel P. Berrange 提交于
When launching a QEMU guest the binary is probed to discover the list of supported CPU names. Remove this probing with a simple lookup of CPU models in the qemuCapsPtr object. This avoids another invocation of the QEMU binary during the startup path. As a nice benefit we can now remove all the nasty hacks from the test suite which were done to avoid having to exec QEMU on the test system. The building of the -cpu command line can just rely on data we pre-populate in qemuCapsPtr. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
When XML for a new guest is received, the machine type is immediately canonicalized into the version specific name. This involves probing QEMU for supported machine types. Replace this probing with a lookup of the machine types in the (hopefully cached) qemuCapsPtr object Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Remove all use of the existing APIs for querying QEMU capability flags. Instead obtain a qemuCapsPtr object from the global cache. This avoids the execution of 'qemu -help' (and related commands) when launching new guests. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 20 9月, 2012 2 次提交
-
-
由 Martin Kletzander 提交于
-
由 Martin Kletzander 提交于
-
- 18 9月, 2012 1 次提交
-
-
由 Osier Yang 提交于
All of ide-drive, ide-hd, ide-cd, scsi-disk, scsi-hd, and scsi-cd supports wwn property. (NB, scsi-block doesn't support to set wwn). * src/qemu/qemu_command.c: Error out if underlying QEMU doesn't support wwn property for the device; Set wwn for the device otherwise. * tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.args: New test * tests/qemuxml2argvdata/qemuxml2argv-disk-ide-wwn.xml: Likewise * tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.args: Likewise * tests/qemuxml2argvdata/qemuxml2argv-disk-scsi-disk-wwn.xml: Likewise * tests/qemuxml2argvtest.c: Add the new tests.
-
- 15 9月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
Several test cases were mistakenly raising errors due to the QEMU_CAPS_KVM flag being missed.
-
- 14 9月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
This patch adds full support for EOI setting for domains. Because this is CPU feature (flag), the model needs to be added even when it's not specified. Fortunately this problem was already solved with kvmclock, so this patch simply abuses that. And due to the size of the patch (17 lines) I dared to include the tests.
-
- 13 9月, 2012 2 次提交
-
-
由 Daniel P. Berrange 提交于
The current qemu capabilities are stored in a virBitmapPtr object, whose type is exposed to callers. We want to store more data besides just the flags, so we need to move to a struct type. This object will also need to be reference counted, since we'll be maintaining a cache of data per binary. This change introduces a 'qemuCapsPtr' virObject class. Most of the change is just renaming types and variables in all the callers Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Guannan Ren 提交于
-
- 04 9月, 2012 1 次提交
-
-
由 Viktor Mihajlovski 提交于
After discussion with DB we decided to rename the new iolimit element as it creates the impression it would be there to limit (i.e. throttle) I/O instead of specifying immutable characteristics of a block device. This is also backed by the fact that the term I/O Limits has vanished from newer storage admin documentation. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 03 9月, 2012 1 次提交
-
-
由 Martin Kletzander 提交于
Few tests were added which are checking whether the parsing of the xml and command-line arguments is working and compatible with each other.
-
- 01 9月, 2012 1 次提交
-
-
由 Viktor Mihajlovski 提交于
Implementation of iolimits for the qemu driver with capability probing for block size attribute and command line generation for block sizes. Including testcase for qemuxml2argvtest. Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 22 8月, 2012 1 次提交
-
-
由 J.B. Joret 提交于
Qemu command line generation for geometry override and testcases. Signed-off-by: NJ.B. Joret <jb@linux.vnet.ibm.com> Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 08 8月, 2012 1 次提交
-
-
由 Guannan Ren 提交于
Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel. When scsi model is given explicitly in XML(model > 0) checking if the underlying QEMU supports it or not first, raise an error on checking failure. When the model is not given(mode <= 0), return LSI by default, if the QEMU doesn't support it, raise an error.
-
- 07 8月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
This converts the following public API datatypes to use the virObject infrastructure: virConnectPtr virDomainPtr virDomainSnapshotPtr virInterfacePtr virNetworkPtr virNodeDevicePtr virNWFilterPtr virSecretPtr virStreamPtr virStorageVolPtr virStoragePoolPtr The code is significantly simplified, since the mutex in the virConnectPtr object now only needs to be held when accessing the per-connection virError object instance. All other operations are completely lock free. * src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert public datatypes to use virObject * src/conf/domain_event.c, src/phyp/phyp_driver.c, src/qemu/qemu_command.c, src/qemu/qemu_migration.c, src/qemu/qemu_process.c, src/storage/storage_driver.c, src/vbox/vbox_tmpl.c, src/xen/xend_internal.c, tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c, tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert to use virObjectUnref/virObjectRef Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 02 8月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch enables the "none" USB controller for qemu guests and adds valdiation on hot-plugged devices if the guest has USB disabled. This patch also adds a set of tests to check parsing of domain XMLs that use the "none" controller and some forbidden situations concerning it.
-
- 23 7月, 2012 1 次提交
-
-
由 Peter Krempa 提交于
This patch enhances qemuxml2argvtest to deal with semantically incorrect domain XMLs, that generate errors while parsing. This patch cleans up macros that invoke the tests and changes boolean flags to a bit array flag variable.
-