This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>

Remove the <stdbool.h> header from all source files / headers
and just put it into internal.h

* src/internal.h: Add <stdbool.h>

Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'

followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.

* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.

* src/driver.h (virDrvGetSysinfo): New typedef.
(_virDriver): New callback member.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/vmware/vmware_driver.c (vmwareDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e040
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.

This opens up the possibility of reusing the smaller ChrSourceDef
for both qemu monitor and a passthrough smartcard device.

* src/conf/domain_conf.h (_virDomainChrDef): Factor host
details...
(_virDomainChrSourceDef): ...into new struct.
(virDomainChrSourceDefFree): New prototype.
* src/conf/domain_conf.c (virDomainChrDefFree)
(virDomainChrDefParseXML, virDomainChrDefFormat): Split...
(virDomainChrSourceDefClear, virDomainChrSourceDefFree)
(virDomainChrSourceDefParseXML, virDomainChrSourceDefFormat):
...into new functions.
(virDomainChrDefParseTargetXML): Update clients to reflect type
split.
* src/vmx/vmx.c (virVMXParseSerial, virVMXParseParallel)
(virVMXFormatSerial, virVMXFormatParallel): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
* src/xen/xend_internal.c (xenDaemonParseSxprChar)
(xenDaemonFormatSxprChr): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxAttachSerial)
(vboxAttachParallel): Likewise.
* src/security/security_dac.c (virSecurityDACSetChardevLabel)
(virSecurityDACSetChardevCallback)
(virSecurityDACRestoreChardevLabel)
(virSecurityDACRestoreChardevCallback): Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback)
(SELinuxRestoreSecurityChardevLabel)
(SELinuxSetSecurityChardevCallback): Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.
* src/lxc/lxc_driver.c (lxcVmStart, lxcDomainOpenConsole):
Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineChr): Likewise.
* src/uml/uml_driver.c (umlIdentifyOneChrPTY, umlIdentifyChrPTY)
(umlDomainOpenConsole): Likewise.
* src/qemu/qemu_command.c (qemuBuildChrChardevStr)
(qemuBuildChrArgStr, qemuBuildCommandLine)
(qemuParseCommandLineChr): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjPrivateXMLFormat)
(qemuDomainObjPrivateXMLParse): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupChardevCgroup): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_driver.c (qemudFindCharDevicePTYsMonitor)
(qemudFindCharDevicePTYs, qemuPrepareChardevDevice)
(qemuPrepareMonitorChr, qemudShutdownVMDaemon)
(qemuDomainOpenConsole): Likewise.
* src/qemu/qemu_command.h (qemuBuildChrChardevStr)
(qemuBuildChrArgStr): Delete, now that they are static.
* src/libvirt_private.syms (domain_conf.h): New exports.
* cfg.mk (useless_free_options): Update list.
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Update
tests.

Don't report an error when the VirtualBox registry key is missing,
as this just indicates that VirtualBox is not installed in general.

This matches the behavior of the XPCOM glue that silently ignores
a missing VBoxXPCOMC.so.

VirtualBox uses megabyte, libvirt uses kilobyte.

Add vboxArrayGetWithUintArg to handle new signature variations. Also
refactor vboxArrayGet* implementation to use a common helper function.

Deal with the incompatible changes in the VirtualBox 4.0 API. This
includes major changes in virtual machine and storage medium lookup,
in RDP server property handling, in session/lock handling and other
minor areas.

VirtualBox 4.0 also dropped the old event API and replaced it with a
completely new one. This is not fixed yet and will be addressed in
another patch. Therefore, currently the domain events are supported
for VirtualBox 3.x only.

Based on initial work from Jean-Baptiste Rouault.

VIR_ERR_INVALID_DOMAIN is meant for invalid domain pointers.
VIR_ERR_NO_DOMAIN is meant for non-existing domains.

On Windows IID's are represented as GUID by value, instead of nsID
by reference on non-Windows platforms.

Patch the vbox_CAPI_v2_2.h header to deal with this difference.

Rewrite vboxIID abstraction that deals with the different IID
representations. Add support for the GUID representation. Also unify
the four context dependent free functions for vboxIIDs

  vboxIIDUnalloc, vboxIIDFree, vboxIIDUtf8Free, vboxIIDUtf16Free

into vboxIIDUnalloc that is now safe to be called (even multiple
times) on a vboxIID independent of the source and context of the
vboxIID.

The new vboxIID is designed to be used as a stack allocated variable.
It has a value member that represents the actual IID value.

This commit adds support for IPv6 parsing and formatting to the
virtual network XML parser, including moving around data definitions
to allow for multiple <ip> elements on a single network, but only
changes the consumers of this API to accommodate for the changes in
API/structure, not to add any actual IPv6 functionality. That will
come in a later patch - this patch attempts to maintain the same final
functionality in both drivers that use the network XML parser - vbox
and "bridge" (the Linux bridge-based driver used by the qemu
hypervisor driver).

* src/libvirt_private.syms: Add new private API functions.
* src/conf/network_conf.[ch]: Change C data structure and
  parsing/formatting.
* src/network/bridge_driver.c: Update to use new parser/formatter.
* src/vbox/vbox_tmpl.c: update to use new parser/formatter
* docs/schemas/network.rng: changes to the schema -
  * there can now be more than one <ip> element.
  * ip address is now an ip-addr (ipv4 or ipv6) rather than ipv4-addr
  * new optional "prefix" attribute that can be used in place of "netmask"
  * new optional "family" attribute - "ipv4" or "ipv6"
    (will default to ipv4)
  * define data types for the above
* tests/networkxml2xml(in|out)/nat-network.xml: add multiple <ip> elements
  (including IPv6) to a single network definition to verify they are being
  correctly parsed and formatted.

XPCOM returns an array as a pointer to an array of pointers to the
actual items. When the array isn't needed anymore the items are
released, but the actual array containing the pointers to the items
was not freed and leaked.

Free the actual array using ComUnallocMem.

This doesn't affect MSCOM as SafeArrayDestroy releases all items
and frees the array.

Add a vboxArray to hide the details from the general driver code.

Don't require dlopen, but link to ole32 and oleaut32 on Windows.

Don't expose g_pVBoxFuncs anymore. It was only used to get the
version of the API. Make VBoxCGlueInit return the version instead.
This simplifies the implementation of the MSCOM glue layer.

Get the VirtualBox version from the registry.

Add a dummy implementation of the nsIEventQueue to the MSCOM glue
as there seems to be no direct equivalent with MSCOM. It might be
implemented using the normal window message loop. This requires
additional investigation.

MSCOM requires stdcall convention.

* src/util/virtaudit.c: Free audit string
* src/vbox/vbox_XPCOMCGlue.c: Free library name

Except LXC and UML driver, implementations of all other drivers
simply return 0, because these drivers doesn't have config both
in memory and on disk, no need to track if the domain of these
drivers updated or not.

Rename "xenUnifiedDomainisPersistent" to "xenUnifiedDomainIsPersistent"

* esx/esx_driver.c
* lxc/lxc_driver.c
* opennebula/one_driver.c
* openvz/openvz_driver.c
* phyp/phyp_driver.c
* test/test_driver.c
* uml/uml_driver.c
* vbox/vbox_tmpl.c
* xen/xen_driver.c
* xenapi/xenapi_driver.c

* src/driver.h (new typedef, new callback member for "_virDriver")
* src/esx/esx_driver.c
* src/lxc/lxc_driver.c
* src/opennebula/one_driver.c
* src/openvz/openvz_driver.c
* src/phyp/phyp_driver.c
* src/qemu/qemu_driver.c
* src/remote/remote_driver.c
* src/test/test_driver.c
* src/uml/uml_driver.c
* src/vbox/vbox_tmpl.c
* src/xen/xen_driver.c
* src/xenapi/xenapi_driver.c

* cfg.mk (sc_prohibit_sprintf): New rule.
(sc_prohibit_asprintf): Avoid false positives.
* docs/hacking.html.in (Printf-style functions): Document the
policy.
* HACKING: Regenerate.
* .x-sc_prohibit_sprintf: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/vbox/vbox_tmpl.c (vboxStartMachine, vboxAttachUSB): Use
virAsprintf instead.
* src/uml/uml_driver.c (umlOpenMonitor): Use snprintf instead.
* tools/virsh.c (cmdDetachInterface): Likewise.
* src/security/security_selinux.c (SELinuxGenSecurityLabel):
Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineCmd): Likewise,
and ensure large enough buffer.

To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.

* src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in, src/driver.h: Define the
  new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
  API entry point

This is actually a workaround, to unbreak make check on systems
without VirtualBox.

This partly reverts df90ca76.

Don't disable the VirtualBox driver when configure can't find
VBoxXPCOMC.so, rely on detection at runtime again instead.

Keep --with-vbox=/path/to/virtualbox intact, added to for:
https://bugzilla.redhat.com/show_bug.cgi?id=609185

Detection order for VBoxXPCOMC.so:

1. VBOX_APP_HOME environment variable
2. configure provided location
3. hardcoded list of known locations
4. dynamic linker search path

Also cleanup the glue code and improve error reporting.

Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point.  Only in subsequent per-driver patches will
a distinction be made.

In general, virDomainGetInfo should prefer the current vcpus.

* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit.  Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.

Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API.  On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.

* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.

* src/driver.h (virDrvDomainSetVcpusFlags)
(virDrvDomainGetVcpusFlags): New typedefs.
(_virDriver): New callback members.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.

Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.

Update remote_protocol-structs to placate make syntax-check.

Undo unintended modifications in vboxDomainGetInfo.

Update the function table of the VirtualBox and XenAPI drivers.

Adding parsing code for memory tunables in the domain xml file
also change the internal define structures used for domain memory
informations
Adds a new specific test

* src/vbox/vbox_tmpl.c (vboxAttachDrives): Capture return value.

* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Split...
(vboxSetBootDeviceOrder, vboxAttachDrives, vboxAttachSound)
(vboxAttachNetwork, vboxAttachSerial, vboxAttachParallel)
(vboxAttachVideo, vboxAttachDisplay, vboxAttachUSB): ...into new
helper functions.

* src/vbox/vbox_tmpl.c (vboxDomainCreateWithFlags): Split...
(vboxStartMachine): ...into new helper.

There is actually a difference between the character device type (serial,
parallel, channel, ...) and the target type (virtio, guestfwd). Currently
they are awkwardly conflated.

Start to pull them apart by renaming targetType -> deviceType. This is
an entirely mechanical change.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add the library entry point for the new virDomainQemuMonitorCommand()
entry point.  Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.

Changes since v1:
 - Go back to using the virDriver table for qemuDomainMonitorCommand, due to
   linking issues
 - Added versioning information to the libvirt-qemu.so

Changes since v2:
 - None

Changes since v3:
 - Add LGPL header to libvirt-qemu.c
 - Make virLibConnError and virLibDomainError macros instead of function calls

Changes since v4:
 - Move exported symbols to libvirt_qemu.syms
Signed-off-by: NChris Lalancette <clalance@redhat.com>

This allows the user to give an explicit path to configure

  ./configure --with-vbox=/path/to/virtualbox

instead of having the VirtualBox driver probe a set of possible
paths at runtime. If no explicit path is specified then configure
probes the set of "known" paths.

https://bugzilla.redhat.com/show_bug.cgi?id=609185

* src/esx/esx_driver.c (esxDomainCreate): Move guts...
(esxDomainCreateWithFlags): ...to new function.
(esxDriver): Trivially support the new API.
* src/lxc/lxc_driver.c (lxcDomainStart, lxcDomainStartWithFlags)
(lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDomainStart)
(oneDomainStartWithFlags, oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDomainCreate)
(openvzDomainCreateWithFlags, openvzDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainStart)
(qemudDomainStartWithFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testDomainCreate)
(testDomainCreateWithFlags, testDriver): Likewise.
* src/uml/uml_driver.c (umlDomainStart, umlDomainStartWithFlags)
(umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainCreate)
(vboxDomainCreateWithFlags, Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainCreate)
(xenUnifiedDomainCreateWithFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainCreate)
(xenapiDomainCreateWithFlags, xenapiDriver): Likewise.

Persistent domain creation needs the same features as transient
domains, but virDomainCreate lacks the flags argument present in
virDomainCreateXML.  virDomainCreateFlags is already claimed as
a public enum, so we have to break convention and expose
virDomainCreateWithFlags.

* include/libvirt/libvirt.h.in (virDomainCreateWithFlags): Add.
* src/driver.h (virDrvDomainCreateWithFlags): Internal API.
* src/libvirt.c (virDomainCreateWithFlags): Glue public API to
driver API.
* src/libvirt_public.syms (LIBVIRT_0.8.2): Expose public API.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.