We only use libpciaccess for resolving device product/vendor. If
initializing the library fails (say if using qemu:///session), don't
warn so loudly, and carry on as usual.

* This patch is a modification of a patch submitted by Nigel Jones.
  It fixes several memory leaks on device addition/removal:

1. Free the virNodeDeviceDefPtr in udevAddOneDevice if the return
   value is non-zero

2. Always release the node device reference after the device has been
   processed.

* Refactored for better readability per the suggestion of clalance

* If a nodedev has a parent that we don't want to display, we should
  continue walking up the udev device tree to see if any of its
  earlier ancestors are devices that we display.  It makes the tree
  much nicer looking than having a whole lot of devices hanging off
  the root node.

* Incorporated Jim's feedback (v1 & v2)

* Moved case of DEVTYPE == "wlan" up as it's definitive that we have a network interface.

* Made comment more detailed about the wired case to explain better
  how it differentiates between wired network interfaces and USB
  devices.

Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test

Handle concatenated strings manually.

Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

Run this:
  git grep -l 'VIR_ERROR0\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR0)\s*\((".*?")\)/$1(_($2))/'

Product and vendor values were swapped in the XML, which made virt-manager
PCI device listing kinda useless.

We were over-writing a pointer without freeing it in
case of a disk device, leading to a memory leak.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NGuido Günther <agx@sigxcpu.org>

Spell out 'Red Hat, Inc.':
 git grep -i 'Copyright.*Red Hat' | grep -v Inc

Include (C) consistently:
 git grep -i 'Copyright [^(].*Red Hat'

* src/lxc/lxc_container.c: Update copyright formatting.
* src/node_device/node_device_udev.c: Likewise.
* src/node_device/node_device_udev.h: Likewise.
* src/xen/xend_internal.h: Likewise.
* src/xen/xm_internal.c: Likewise.
* src/xen/xm_internal.h: Likewise.
* tests/xmconfigtest.c: Likewise.
* tests/object-locking.ml: Likewise.
* tools/virt-pki-validate.in: Likewise.
* tools/virt-xml-validate.in: Likewise.

* Allow devices without parent links to be created and set their parent to the root "computer" node

* The udev driver didn't properly free resources that it allocates when setting up the 'computer' device in the error case.

* src/node_device/node_device_udev.c (udevEnumerateDevices): Remove
unnecessary call to udev_list_entry_get_name.

The virConnectPtr is no longer required for error reporting since
that is recorded in a thread local. Remove use of virConnectPtr
from all APIs in node_device_conf.{h,c} and update all callers to
match

The original udev node device backend neglected to lock the driverState
struct containing the device list when adding and removing devices
* src/node_device/node_device_udev.c: add necessary locks in
  udevRemoveOneDevice() and udevAddOneDevice()

udevGetUintProperty was called with base set to 0 for busnum and devnum.
With base 0 strtoul parses the number as octal if it start with a 0. But
busnum and devnum are decimal and udev returns them padded with leading
zeros. So strtoul parses them as octal. This works for certain decimal
values like 001-007, but fails for values like 008.

Change udevProcessUSBDevice to use base 10 for busnum and devnum.

This fixes a segfault when the event handler is called after shutdown
when the global driver state is NULL again.

Also fix a locking issue in an error path.

* src/node_device/node_device_udev.c: udevSetupSystemDev() only print the
  error message if lookup failed in both DMI_DEVPATH and DMI_DEVPATH_FALLBACK

I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
    VIR_DEBUG
    VIR_DEBUG0
    VIR_ERROR
    VIR_ERROR0
    VIR_INFO
    VIR_WARN
    VIR_WARN0
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

We are setting the same property two different ways without
free'ing in between. Just drop the second assignment.

There are quite a few differences between how udev exposes legacy
and USB floppy devs, but this patch takes care of both variants.

udev doesn't prefix USB product/vendor info with '0x', so the
strtol conversions were wrong for the product field (vendor already
set the correct base). Make the change for PCI product/vendor as
well to be safe.

This fixes USB device assignment via virt-manager.

older kernels such as 2.6.26 have it there.

src/node_device/node_device_udev.c was using a function available only
on the daemon code, fix this and use the function available globally

* src/node_device/node_device_udev.c: replace use of virEventAddHandleImpl
  by virEventAddHandle

Provides the CDROM label for current media. Only implemented for the
udev backend.

Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.

Fix crash on strdup in that case.

I realized that I inadvertently added a member to the def struct to
contain each device's sysfs path when there was an existing member in the
dev struct for "OS specific path to device metadat, eg sysfs"  Since the
udev backend needs to record the sysfs path while it's in the process of
creating the device, before the dev struct gets allocated, I chose to
remove the member from the dev struct.

* src/conf/node_device_conf.c src/conf/node_device_conf.h
  src/node_device/node_device_driver.c src/node_device/node_device_hal.c
  src/node_device/node_device_udev.c: remove devicePath from the
  structure and use def->sysfs_path instead

uses libpciaccess to provide human readable names for PCI vendor and
device IDs
* configure.in: add a requirement for libpciaccess >= 0.10.0
* src/Makefile.am: add the associated compilation flags and link
* src/node_device/node_device_udev.c: lookup the libpciaccess for
  vendor name and product name based on their ids

* src/conf/node_device_conf.h src/conf/node_device_conf.c: add specific
  support for SCSI target in node device capabilities
* src/node_device/node_device_udev.c: add some extra detection code
  when handling udev output

* configure.in: add new --with-udev, disabled by default, and requiring
  libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
  the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
  to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
  of fields in node device definitions, and an API to look them up,
  remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
  files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
  virBuildPath and virBuildPathInternal() function