- 30 6月, 2011 1 次提交
-
-
由 Osier Yang 提交于
It doesn't generate "<name>" and "<format>" nodes for "<source>" even if they are explicitly specified. This patch fixes it.
-
- 28 6月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 27 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
We already have a public virDomainPinVcpu, which implies that Pin and Vcpu are treated as separate words. Unreleased commit e261987c introduced virDomainGetVcpupinInfo as the first public API that used Vcpupin, although we had prior internal uses of that spelling. For consistency, change the spelling to be two words everywhere, regardless of whether pin comes first or last. * daemon/remote.c: Treat vcpu and pin as separate words. * include/libvirt/libvirt.h.in: Likewise. * src/conf/domain_conf.c: Likewise. * src/conf/domain_conf.h: Likewise. * src/driver.h: Likewise. * src/libvirt.c: Likewise. * src/libvirt_private.syms: Likewise. * src/libvirt_public.syms: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise. * src/remote/remote_protocol.x: Likewise. * src/remote_protocol-structs: Likewise. Suggested by Matthias Bolte.
-
- 25 6月, 2011 2 次提交
-
-
由 Taku Izumi 提交于
This patch teaches "virsh vcpupin" command to query if no list is given. Its feature is to show CPU affinity information in more reader-friendly way. # virsh vcpupin VM --config VCPU: CPU Affinity ---------------------------------- 0: 1-6,9-20 1: 10 2: 5,9-11,15-20 3: 1,3,5,7,9,11,13,15 When cpulist is omitted, vcpu number is optional. When vcpu number is provided, information of only specified vcpu is displayed. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Taku Izumi 提交于
The "virsh vcpuinfo" command results in failure when the target domain is inactive on KVM. This patch improves this behavior by adding the fallback to invoke virDomainGetVcpupinInfo API in case of virDomainGetVcpus API returns error and the target domain is inactive. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
- 24 6月, 2011 2 次提交
-
-
由 Eric Blake 提交于
This reverts commit 3e2493ce.
-
由 Daniel P. Berrange 提交于
If an application is using libvirt + KVM as a piece of its internal infrastructure to perform a specific task, it can be desirable to guarentee the VM dies when the virConnectPtr disconnects from libvirtd. This ensures the app can't leak any VMs it was using. Adding VIR_DOMAIN_START_AUTOKILL as a flag when starting guests enables this to be done. * include/libvirt/libvirt.h.in: All VIR_DOMAIN_START_AUTOKILL * src/qemu/qemu_driver.c: Support automatic killing of guests upon connection close * tools/virsh.c: Add --autokill flag to 'start' and 'create' commands
-
- 22 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=682121 Gettext reserves the empty string for internal use, and it must not be passed through _(). We were violating this for commands that (for whatever reason) used "" for their description. * tools/virsh.c (vshCmddefHelp): Don't translate empty string. Reported by Tatsuo Kawasaki.
-
- 21 6月, 2011 3 次提交
-
-
由 Eric Blake 提交于
Similar to pool-create-as. * tools/virsh.c (cmdSnapshotCreateAs): Add --print-xml. * tools/virsh.pod: Document it.
-
由 Eric Blake 提交于
Producing an xml file just for name and description fields is overkill; this makes life easier from virsh. * tools/virsh.c (cmdSnapshotCreateAs): New command. (snapshotCmds): Install it. * tools/virsh.pod: Document it.
-
由 Eric Blake 提交于
* tools/virsh.c (info_snapshot_create, info_save): Clarify description. * tools/virsh.pod (save): Likewise.
-
- 20 6月, 2011 4 次提交
-
-
由 Daniel P. Berrange 提交于
The 'char *cur' variable was being assigned from a 'const char *' string, thus discarding constness. As well as causing a compile warning, it masked a piece of code which attempts to assign to the previously const string. * tools/virsh.c: Fix const-ness of 'cur' variable in vcpupin
-
由 Taku Izumi 提交于
When resetting vcpupin setting, we have to specify all host physical cpus as a cpulist parameter of virsh vcpupin command. It's a little tedious. This patch changes to allow to receive the special keyword 'r' as a cpulist parameter of virsh vcpupin command when resetting vcpupin setting. If you set the following: # virsh vcpupin VM 0 r the vcpu0 will be pinned to all physical cpus. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Taku Izumi 提交于
When using vcpupin command, we have to speficy comma-separated list as cpulist, but this is tedious in case the number of phsycal cpus is large. This patch improves this by introducing special markup "-" and "^" which are similar to XML schema of "cpuset" attribute. The example: # virsh vcpupin Guest 0 0-15,^8 is identical to # virsh vcpupin Guest 0 0,1,2,3,4,5,6,7,9,10,11,12,13,14,15 NOTE: The expression is sequentially evaluated, so "0-15,^8" is not identical to "^8,0-15". Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com>
-
由 Hu Tao 提交于
Add --config, --live and --current for command blkiotune
-
- 17 6月, 2011 1 次提交
-
-
由 Jiri Denemark 提交于
-
- 15 6月, 2011 6 次提交
-
-
由 Eric Blake 提交于
This reduces things from O(n^2) to O(n). * tools/virsh.c (vshCommandOptArgv): Change signature. (cmdEcho): Update caller. Based on a patch by Lai Jiangshan.
-
由 Adam Litke 提交于
Define two new virsh commands: * blockpull: Perform block pull operations (incremental plus start and stop continuous streams) * blockpullinfo: Retrieve progress info for continuous block pull Share print_job_progress() with the migration code. * tools/virsh.c: implement the new commands Signed-off-by: NAdam Litke <agl@us.ibm.com>
-
由 Minoru Usui 提交于
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
由 Minoru Usui 提交于
Signed-off-by: NMinoru Usui <usui@mxm.nes.nec.co.jp>
-
由 Lai Jiangshan 提交于
A VSH_OFLAG_REQ_OPT option means --optionname is required when used. It will kill any ambiguity, even a !VSH_OFLAG_REQ option listed before a VSH_OFLAG_REQ option, if the !VSH_OFLAG_REQ option is a VSH_OFLAG_REQ_OPT option. It will help us use optional argument with VSH_OT_ARGV argument. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
-
由 Lai Jiangshan 提交于
A name will improve the usege, example # virsh help echo NAME echo - echo arguments SYNOPSIS echo [--shell] [--xml] [<string>]... DESCRIPTION Echo back arguments, possibly with quoting. OPTIONS --shell escape for shell use --xml escape for XML use <string> arguments to echo "[<string>]..." is added to SYNOPSIS. "<string> arguments to echo" is added to OPTIONS. Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
-
- 14 6月, 2011 3 次提交
-
-
由 Michal Privoznik 提交于
'virsh version' might report against which version of libvirtd is running.
-
由 Osier Yang 提交于
Qemu once supported following memory stats which will returned by "query_balloon": stat_put(dict, "actual", actual); stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]); stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]); stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]); stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]); stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]); stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]); But it later disabled all the stats except "actual" by commit 07b0403dfc2b2ac179ae5b48105096cc2d03375a. libvirt doesn't parse "actual", so user will always see a empty result with "virsh dommemstat $domain". Even qemu haven't disabled the stats, we should support parsing "actual".
-
由 Hu Tao 提交于
This patch deprecates following enums: VIR_DOMAIN_MEM_CURRENT VIR_DOMAIN_MEM_LIVE VIR_DOMAIN_MEM_CONFIG VIR_DOMAIN_VCPU_LIVE VIR_DOMAIN_VCPU_CONFIG VIR_DOMAIN_DEVICE_MODIFY_CURRENT VIR_DOMAIN_DEVICE_MODIFY_LIVE VIR_DOMAIN_DEVICE_MODIFY_CONFIG And modify internal codes to use virDomainModificationImpact.
-
- 13 6月, 2011 1 次提交
-
-
由 Taku Izumi 提交于
This patch adds the new option (--live, --config and --current) to "virsh vcpupin" command. The behavior of above aption is the same as that of "virsh setmem", "virsh setvcpus", and whatnot. When the --config option is specified, the command affects a persistent domain, while --live option is specified, it affects a running (live) domain. The --current option cannot be used with --config or --live at the same time, and when --current is specified, it affects a "current" domain.
-
- 08 6月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Coverity complained about these intentional fallthrough cases, but not about other cases that were explicitly marked with nice comments. For some reason, Coverity doesn't seem smart enough to parse the up-front English comment in virsh about intentional fallthrough :) * tools/virsh.c (cmdVolSize): Mark fallthrough in a more typical fashion. * src/conf/nwfilter_conf.c (virNWFilterRuleDefDetailsFormat) (virNWFilterRuleDetailsParse): Mark explicit fallthrough.
-
由 Osier Yang 提交于
API virDomainMigrateSetMaxSpeed was introduced since 0.9.0, but no command in virsh yet.
-
- 04 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
This commit is safe precisely because there has been no release for any of the enum values being deleted (they were added post-0.9.1). After the 0.9.2 release, we can then take advantage of virDomainModificationImpact in more places. * include/libvirt/libvirt.h.in (virDomainModificationImpact): New enum. (virDomainSchedParameterFlags, virMemoryParamFlags): Delete, since these were never released, and the new enum works fine here. * src/libvirt.c (virDomainGetMemoryParameters) (virDomainSetMemoryParameters) (virDomainGetSchedulerParametersFlags) (virDomainSetSchedulerParametersFlags): Update documentation. * src/qemu/qemu_driver.c (qemuDomainSetMemoryParameters) (qemuDomainGetMemoryParameters, qemuSetSchedulerParametersFlags) (qemuSetSchedulerParameters, qemuGetSchedulerParametersFlags) (qemuGetSchedulerParameters): Adjust clients. * tools/virsh.c (cmdSchedinfo, cmdMemtune): Likewise. Based on ideas by Daniel Veillard and Hu Tao.
-
- 03 6月, 2011 1 次提交
-
-
由 Eric Blake 提交于
I intentionally set things up so 'virsh help interface' lists commands in alphabetical order, but 'man virsh' lists them in topical order; this matches our practice on some other commands. * tools/virsh.pod: Document all iface commands. * tools/virsh.c (ifaceCmds): Sort.
-
- 02 6月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
* tools/virsh.c: Add screenshot command * tools/virsh.pod: Document new command * src/libvirt.c: Fix off-be-one error
-
- 31 5月, 2011 2 次提交
-
-
由 Daniel P. Berrange 提交于
The virSysinfoIsEqual method was mistakenly inside a #ifndef WIN32 conditional. The existing virSysinfoFormat is also stubbed out on Win32, even though the code works without any trouble. This breaks XML output on Win32, so the stub is removed. virsh migrate mistakenly had some variables inside the conditional * src/util/sysinfo.c: Build virSysinfoIsEqual on Win32 and remove Win32 stub for virSysinfoFormat * tools/virsh.c: Fix variable declaration on Win32
-
由 Daniel P. Berrange 提交于
Switch virsh migrate over to use virDomainMigrate2 and virDomainMigrateToURI2. This is still compatible with older libvirts, because these methods dynamically choose whether to perform v1, v2 or v3 migration based on declared RPC support from the libvirtd instances Add a --xml arg which allows the user to pass in a custom XML document. This XML document must be ABI compatible with the current *live* XML document for the running guest on the source host. ABI compatibility will be enforced by any driver supporting this function * tools/virsh.c: Add '--xml' arg to migrate command
-
- 29 5月, 2011 2 次提交
-
-
由 Eric Blake 提交于
Since we can now set just --live or --config, we also need to be able to query that back. In the case of setting both --live and --config, it shouldn't matter which value we read back; otherwise, since querying treats the two flags as mutually exclusive, so does this patch. * tools/virsh.c (cmdSchedinfo): Use new API where appropriate.
-
由 Eric Blake 提交于
Rather mechanical in nature. * src/driver.h: Use newer virTypedParameter API names. * src/libvirt.c: Likewise. * daemon/remote.c: Likewise. * src/esx/esx_driver.c: Likewise. * src/libxl/libxl_driver.c: Likewise. * src/lxc/lxc_driver.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/test/test_driver.c: Likewise. * src/xen/xen_driver.c: Likewise. * src/xen/xen_hypervisor.c: Likewise. * src/xen/xen_hypervisor.h: Likewise. * src/xen/xend_internal.c: Likewise. * tools/virsh.c: Likewise.
-
- 28 5月, 2011 1 次提交
-
-
由 Michal Privoznik 提交于
This implements the commands iface-begin, iface-commit, and iface-rollback, which simply call the corresponding functions in the libvirt API.
-
- 27 5月, 2011 1 次提交
-
-
由 Hu Tao 提交于
The new flags allow to pick current state, config or the live parameter, with current being the existing API default (0). This also hooks this to --config, --live, --current parameters for the memtune virsh command * include/libvirt/libvirt.h.in: defines the new flags * tools/virsh.c: adds support at virsh level * tools/virsh.pod: updates virsh documentation
-
- 26 5月, 2011 1 次提交
-
-
由 Matthias Bolte 提交于
localtime_r expects time_t.
-
- 20 5月, 2011 1 次提交
-
-
由 Supriya Kannery 提交于
Use variables VIRSH_DEBUG and VIRSH_LOG_FILE for controlling virsh logging. Signed-off-by: NSupriya Kannery <supriyak@in.ibm.com>
-
- 19 5月, 2011 1 次提交
-
-
由 Eric Blake 提交于
Ramon de Carvalho Valle reported a problem with: virsh connect qemu:///system as a non-root user. The real root problem appears to be a regression in libvirtd being auto-started on the default qemu:///session URI; however, the symptom points to an independent flaw in virsh - we shouldn't be wasting efforts on making a connection if we aren't going to be using that connection. Fixing virsh avoids Ramon's issue, while I work in the meantime to fix the real libvirtd regression. This patch looks big, but that's because 'gcc -Wmissing-field-initializers' gets triggered by './autobuild.sh --enable-compile-warnings=error', so I had to add 0 initialization to everyone (rather than my preference of just adding the non-zero flags to virshCmds and to cmdConnect). Meanwhile, if you use 'virsh -c URI', the connection must succeed; this patch _only_ optimizes the default connection to be deferred to a later point where we know if a particular command to be run needs a connection. * tools/virsh.c (VSH_CMD_FLAG_NOCONNECT): New flag. (vshCmdDef): Add new flags field. (vshCommandRun): Honor new flag. (domManagementCmds, domMonitoringCmds, storagePoolCmds) (storageVolCmds, networkCmds, nodedevCmds, ifaceCmds) (nwfilterCmds, secretCmds, virshCmds, snapshotCmds) (hostAndHypervisorCmds): Populate new field. (vshReconnect): Don't warn on initial connection.
-