Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.

Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode

* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
  src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
  error code for that module
* po/POTFILES.in: add new file for translations

This partly reverts df90ca76.

Don't disable the VirtualBox driver when configure can't find
VBoxXPCOMC.so, rely on detection at runtime again instead.

Keep --with-vbox=/path/to/virtualbox intact, added to for:
https://bugzilla.redhat.com/show_bug.cgi?id=609185

Detection order for VBoxXPCOMC.so:

1. VBOX_APP_HOME environment variable
2. configure provided location
3. hardcoded list of known locations
4. dynamic linker search path

Also cleanup the glue code and improve error reporting.

Instead of storing the IP address string in virNetwork related
structs, store the parsed virSocketAddr. This will make it
easier to add IPv6 support in the future, by letting driver
code directly check what address family is present

* src/conf/network_conf.c, src/conf/network_conf.h,
  src/network/bridge_driver.c: Convert to use virSocketAddr
  in virNetwork, instead of char *.
* src/util/bridge.c, src/util/bridge.h,
  src/util/dnsmasq.c, src/util/dnsmasq.h,
  src/util/iptables.c, src/util/iptables.h: Convert to
  take a virSocketAddr instead of char * for any IP
  address parameters
* src/util/network.h: Add macros to determine if an address
  is set, and what address family is set.

The getnameinfo() function is more flexible than inet_ntop()
avoiding the need to if/else the code based on socket family.
Also make it support UNIX socket addrs and allow inclusion
of a port (service) address. Finally do proper error reporting
via normal APIs.

* src/conf/domain_conf.c, src/nwfilter/nwfilter_ebiptables_driver.c,
  src/qemu/qemu_conf.c: Fix error handling with virSocketFormat
* src/util/network.c: Rewrite virSocketFormat to use getnameinfo
  and cope with UNIX socket addrs.

Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages

Previously, the functions in src/lxc/veth.c could sometimes return
positive values on failure rather than -1. This made accurate error
reporting difficult, and led to one failure to catch an error in a
calling function.

This patch makes all the functions in veth.c consistently return 0 on
success, and -1 on failure. It also fixes up the callers to the veth.c
functions where necessary.

Note that this patch may be related to the bug:

  https://bugzilla.redhat.com/show_bug.cgi?id=607496.

It will not fix the bug, but should unveil what happens.

* po/POTFILES.in - add veth.c, which previously had no translatable strings
* src/lxc/lxc_controller.c
* src/lxc/lxc_container.c
* src/lxc/lxc_driver.c    - fixup callers to veth.c, and remove error logs,
                            as they are now done in veth.c
* src/lxc/veth.c - make all functions consistently return -1 on error.
* src/lxc/veth.h - use ATTRIBUTE_NONNULL to protect against NULL args.

Allows listing existing pools and requesting information about them.

Alter the esxVI_ProductVersion enum in a way that allows to check for
product type by masking.

Allow for a host UUID in the capabilities XML. Local drivers
will initialize this from the SMBIOS data. If a sanity check
shows SMBIOS uuid is invalid, allow an override from the
libvirtd.conf configuration file

* daemon/libvirtd.c, daemon/libvirtd.conf: Support a host_uuid
  configuration option
* docs/schemas/capability.rng: Add optional host uuid field
* src/conf/capabilities.c, src/conf/capabilities.h: Include
  host UUID in XML
* src/libvirt_private.syms: Export new uuid.h functions
* src/lxc/lxc_conf.c, src/qemu/qemu_driver.c,
  src/uml/uml_conf.c: Set host UUID in capabilities
* src/util/uuid.c, src/util/uuid.h: Support for host UUIDs
* src/node_device/node_device_udev.c: Use the host UUID functions
* tests/confdata/libvirtd.conf, tests/confdata/libvirtd.out: Add
  new host_uuid config option to test

* po/POTFILES.in: Add 3 files.

* po/POTFILES.in: Remove src/util/logging.c and src/util/uuid.c.
* src/phyp/phyp_driver.c (phypUUIDTable_ReadFile): Correct more
VIR_WARN uses, now manually.
(phypUUIDTable_Init, phypUUIDTable_Pull): Likewise.

* po/POTFILES.in: the new module contains translatable strings
* src/Makefile.am: include the files in the utils set
* src/libvirt_private.syms: exports the symbols internally

Changes from v1 to v2:
- changed function name prefixes to 'iface' from previous 'Iface'

- Further to make make syntax-check pass:
 - indentation fix in interface.h
 - added entry to POTFILES.in

I am consolidating network interface related functions used in nwfilter
and macvtap code in utils/interface.c. All function names are prefixed
with 'Iface'. The following functions are now available through
interface.h:

int ifaceCtrl(const char *name, bool up);
int ifaceUp(const char *name);
int ifaceDown(const char *name);

int ifaceCheck(bool reportError, const char *ifname,
               const unsigned char *macaddr, int ifindex);

int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex);

I added 'int ifindex' as parameter to ifaceCheck to the original
function and modified the code accordingly.

* po/POTFILES.in: Add src/nwfilter/nwfilter_learnipaddr.c

Also define ESX_ERROR and ESX_VI_ERROR in a central place, instead of
defining them in each source file.

Add ESX_ERROR and ESX_VI_ERROR to the msg_gen_function list in cfg.mk.

Update po/POTFILES.in accordingly.

* cfg.mk (msg_gen_function): Add xenapiSessionErrorHandler.
* po/POTFILES.in: Add src/xenapi/xenapi_driver.c
* src/xenapi/xenapi_driver.c: Mark strings for translation.
* src/xenapi/xenapi_utils.c (xenapiUtil_ParseQuery):

This exports 3 basic routines:
  - virHookInitialize() initializing the hook support by looking for
    scripts availability
  - virHookPresent() used to test if there is a hook for a given driver
  - virHookCall() which actually calls a synchronous script hook with
    the needed parameters
Note that this doesn't expose any public API except for the locations
and arguments passed to the scripts

* src/Makefile.am: add the 2 new files
* src/util/hooks.h src/util/hooks.c: implements the 3 functions
* src/libvirt_private.syms: export the 3 symbols internally
* po/POTFILES.in: add src/util/hooks.c to translatables modules

This patch implements the core driver and provides
- management functionality for managing the filter XMLs
- compiling the internal filter representation into ebtables rules
- applying ebtables rules on a network (tap,macvtap) interface
- tearing down ebtables rules that were applied on behalf of an
interface
- updating of filters while VMs are running and causing the firewalls to
be rebuilt
- other bits and pieces
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>

This patch adds XML processing for the network filter schema
and extends the domain XML processing to parse the top level
referenced filter along with potentially provided parameters
Signed-off-by: NStefan Berger <stefanb@us.ibm.com>
Signed-off-by: NGerhard Stenzel <gerhard.stenzel@de.ibm.com>

* src/xenapi/xenapi_driver.c (xenapiOpen): Remove useless-if-before-free.
* po/POTFILES.in: Add src/xenapi/xenapi_utils.c.

This part adds the helper code to setup and tear down macvtap devices
using direct communication with the device driver via netlink sockets.
The rather short messages received from the netlink layer are now
written into a dynamically allocated buffer

* src/util/macvtap.h src/util/macvtap.c: provides the new module
* po/POTFILES.in: the module contains translated strings

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

It was used for error reporting only.

This new security driver is responsible for managing UID/GID changes
to the QEMU process, and any files/disks/devices assigned to it.

* qemu/qemu_conf.h: Add flag for disabling automatic file permission
  changes
* qemu/qemu_security_dac.h, qemu/qemu_security_dac.c: New DAC driver
  for QEMU guests
* Makefile.am: Add new files

Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.

This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)

[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450

Each driver supporting CPU selection must fill in host CPU capabilities.
When filling them, drivers for hypervisors running on the same node as
libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers,
such as VMware, need to implement their own way of getting such data.
Raw data can be decoded into virCPUDefPtr using cpuDecode() function.

When implementing virConnectCompareCPU(), a hypervisor driver can just
call cpuCompareXML() function with host CPU capabilities.

For each guest for which a driver supports selecting CPU models, it must
set the appropriate feature in guest's capabilities:

    virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0)

Actions needed when a domain is being created depend on whether the
hypervisor understands raw CPU data (currently CPUID for i686, x86_64
architectures) or symbolic names has to be used.

Typical use by hypervisors which prefer CPUID (such as VMware and Xen):

- convert guest CPU configuration from domain's XML into a set of raw
  data structures each representing one of the feature policies:

    cpuEncode(conn, architecture, guest_cpu_config,
              &forced_data, &required_data, &optional_data,
              &disabled_data, &forbidden_data)

- create a mask or whatever the hypervisor expects to see and pass it
  to the hypervisor

Typical use by hypervisors with symbolic model names (such as QEMU):

- get raw CPU data for a computed guest CPU:

    cpuGuestData(conn, host_cpu, guest_cpu_config, &data)

- decode raw data into virCPUDefPtr with a possible restriction on
  allowed model names:

    cpuDecode(conn, guest, data, n_allowed_models, allowed_models)

- pass guest->model and guest->features to the hypervisor

* src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c
  src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h
  src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h
* configure.in: check for CPUID instruction
* src/Makefile.am: glue the new files in
* src/libvirt_private.syms: add new private symbols
* po/POTFILES.in: add new cpu files containing translatable strings

* po/POTFILES.in: adds src/conf/cpu_conf.c in teh set of files with
  translatable content
* src/conf/cpu_conf.c: remove an unused include

Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}

This introduces simple API for handling JSON data. There is
an internal data structure 'virJSONValuePtr' which stores a
arbitrary nested JSON value (number, string, array, object,
nul, etc).  There are APIs for constructing/querying objects
and APIs for parsing/formatting string formatted JSON data.

This uses the YAJL library for parsing/formatting from

 http://lloyd.github.com/yajl/

* src/util/json.h, src/util/json.c: Data structures and APIs
  for representing JSON data, and parsing/formatting it
* configure.in: Add check for yajl library
* libvirt.spec.in: Add build requires for yajl
* src/Makefile.am: Add json.c/h
* src/libvirt_private.syms: Export JSON symbols to drivers

* src/Makefile.am: Add processinfo.h/processinfo.c
* src/util/processinfo.c, src/util/processinfo.h: Module providing
  APIs for getting/setting process CPU affinity
* src/qemu/qemu_driver.c: Switch over to new APIs for schedular
  affinity
* src/libvirt_private.syms: Export virProcessInfoSetAffinity
  and virProcessInfoGetAffinity to internal drivers

* configure.in: add new --with-udev, disabled by default, and requiring
  libudev > 145
* src/node_device/node_device_udev.c src/node_device/node_device_udev.h:
  the new node device backend
* src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c
  to a better file name
* src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple
  of fields in node device definitions, and an API to look them up,
  remove a couple of unused fields from previous patch.
* src/node_device/node_device_driver.c src/node_device/node_device_driver.h:
  plug the new driver
* po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new
  files and symbols
* src/util/util.h src/util/util.c: add a new convenience macro
  virBuildPath and virBuildPathInternal() function

The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.

* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
  from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor

* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
  a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
  in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module

* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
  src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
  the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
  tests for virt-aa-helper and the security driver, secaatest.c is
  identical to seclabeltest.c except it initializes the 'apparmor'
  driver instead of 'selinux'

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* daemon/stream.c: Handle incoming stream data packets, queuing until
  stream becomes writable. Handle stream completion handshake
* po/POTFILES.in: Add daemon/stream.c