Use virTrimSpaces instead of a custom implementation.

Also use the more common "Unable to initialize mutex" string
and virReportSystemError instead of virStrerror.

They are no longer used.

Open code the call to udev_device_get_sysattr_value
in the one place where it's needed.

Callers only check for an error or a specific integer value.

The callers only care for an error, and a missing attribute
is simply NULL.

Most of the code paths free it right after converting it to
an integer.

We only care about the failure, not a missing property.

There is no need to differentiate between PROPERTY_FOUND
and PROPERTY_MISSING - we can just look if the string is non-NULL.

Error out on parsing errors and use a local const char pointer
instead of chained ifs to check whether we found a match.

Since the switch to VIR_STRDUP this function returns 1 on success,
but the caller treats any non-zero value as failure.

Use udevHasDeviceProperty instead of udevGetStringProperty.
We do not need to copy the string since we do not need it.

Also add braces around the if body, since the change made
syntax check complain.

Two out of three callers free it right after converting it to a number.

Also change the comment at the beginning of the function, because
the comment inside the function told me to.

Open code the error message.

Remove the debug message, open code the error in the two udevGetUint
callers and use a more specific error in SCSI and PCI processing.

The wrapper adds an error message or a debug log.

Since we already log the properties we get from udev as strings,
there is no much use for the debug logs.

Open code the error message and delete the function.

Use virStrToLong_ui instead of udevStrToLong_ui, reformat the code
and report a more specific error message.

Instead of separating it into STRPEFIX and str + strlen.

A variable without use is pointless.

Remove it, since we have no use for it.

If we have not allocated driver yet, there is nothing to cleanup.

Remove the ret variable and return early if there is no driver.

This will simplify cleanup.

Move pci_system_init and pci_system_cleanup into separate functions,
to make the conditional compilation easier to read.

Most of the code paths had to reset it to -1 and returning 0 was
only possible if we made it to the end of the function.

Initialize it to -1 and only set it to 0 if we reach the end, as we do
in most of libvirt code.

If we expose this information, which is one byte in every PCI config
file, we let all mgmt apps know whether the device itself is an endpoint
or not so it's easier for them to decide whether such device can be
passed through into a VM (endpoint) or not (*-bridge).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1317531Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Best viewed with '-w' as this is just an adjustment for future patch to
be readable without that.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Both the hal and udev drivers call virPCI*() functions to the the
SRIOV VF/PF info about PCI devices, and the UDEV backend calls
virPCI*() to get IOMMU group info. Since there is now a single
function call in node_device_linux_sysfs.c to do all of this, replace
all that code in the two backends with calls to
nodeDeviceSysfsGetPCIRelatedDevCaps().

Note that this results in the HAL driver (probably) unnecessarily
calling virPCIDevieAddressGetIOMMUGroupNum(), but in the case that the
host doesn't support IOMMU groups, that function turns into a NOP (it
returns -2, which causes the caller to skip the call to
virPCIDeviceAddressGetIOMMUGroupAddresses()). So in the worst case it
is a few extra cycles spent, and in the best case a mythical platform
that supported IOMMU groups but used HAL rather than UDEV would gain
proper reporting of IOMMU group info.

This file contains only a single function, detect_scsi_host_caps(),
which is declared in node_device_driver.h and called from both the hal
and udev backends. Other things common to the hal and udev drivers
can be placed in that file though. As a prelude to adding further
functions, this patch renames the existing function to something
closer in line with other internal libvirt function names
(nodeDeviceSysfsGetSCSIHostCaps()), and puts the declarations into a
separate .h file.

For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.

This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:

  s/union _virNodeDevCapData */virNodeDevCapDataPtr /

and

  s/caps->type/caps->data.type/

This will make me feel less guilty when adding functions that need a
pointer to one of these.

Including them in the XML makes them unparsable.

https://bugzilla.redhat.com/show_bug.cgi?id=1184131

All the called functions already report an error.

Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.

For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.

This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants

struct _virConnectDriver {
    virHypervisorDriverPtr hypervisorDriver;
    virInterfaceDriverPtr interfaceDriver;
    virNetworkDriverPtr networkDriver;
    virNodeDeviceDriverPtr nodeDeviceDriver;
    virNWFilterDriverPtr nwfilterDriver;
    virSecretDriverPtr secretDriver;
    virStorageDriverPtr storageDriver;
};

Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The node device driver can rely on its global state instead
of the connect private data.

In systemd >= 218, the udev_set_log_fn method has been marked
deprecated and turned into a no-op. Nothing in the udev client
library will print to stderr by default anymore, so we can
just stop installing a logging hook for new enough udev.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

C guarantees that static variables are zero-initialized.  Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.

* src/conf/nwfilter_conf.c: Fix initialization.
* src/cpu/cpu_x86.c: Likewise.
* src/interface/interface_backend_netcf.c: Likewise.
* src/locking/lock_daemon.c: Likewise.
* src/locking/lock_driver_lockd.c: Likewise.
* src/locking/lock_driver_sanlock.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/nwfilter/nwfilter_learnipaddr.c: Likewise.
* src/rpc/virnetserver.c: Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxGenSecurityLabel): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

The manufacurer and product from USB device itself are usually not particularly
useful -- they tend to be missing, or ugly (all-uppercase, padded with spaces,
etc.). Prefer what's in the usb id database and fall back to descriptors only
if the device is too new to be in database.

https://bugzilla.redhat.com/show_bug.cgi?id=1138887