- 29 9月, 2014 1 次提交
-
-
由 Ján Tomko 提交于
Introduced by commit 0dce260c. qemuDomainEventQueue was called with qemuDomainObjPrivatePtr instead of virQEMUDriverPtr. https://bugzilla.redhat.com/show_bug.cgi?id=1147494
-
- 27 9月, 2014 1 次提交
-
-
由 Guido Günther 提交于
Prompted by http://bugs.debian.org/761131
-
- 26 9月, 2014 5 次提交
-
-
由 Daniel P. Berrange 提交于
Fix the typo in VIR_DOMAIN_TUNABLE_CPU_EMULATORIN Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
For the new VIR_DOMAIN_EVENT_ID_TUNABLE event we have a bunch of constants added VIR_DOMAIN_EVENT_CPUTUNE_<blah> VIR_DOMAIN_EVENT_BLKDEVIOTUNE_<blah> This naming convention is bad for two reasons - There is no common prefix unique for the events to both relate them, and distinguish them from other event constants - The values associated with the constants were chosen to match the names used with virConnectGetAllDomainStats so having EVENT in the constant name is not applicable in that respect This patch proposes renaming the constants to VIR_DOMAIN_TUNABLE_CPU_<blah> VIR_DOMAIN_TUNABLE_BLKDEV_<blah> ie, given them a common VIR_DOMAIN_TUNABLE prefix. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Michal Privoznik 提交于
On a domain startup, the variable store path is generated if needed. The path is intended to be generated only once. However, the updated domain definition is not saved into config dir rather than state XML only. So later, whenever the domain is destroyed and the daemon is restarted, the generated path is forgotten and the file may be left behind on virDomainUndefine() call. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Tomoki Sekiyama 提交于
Fix comments about the version in which '.nodeAllocPages' are added. Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
-
由 Peter Krempa 提交于
Since 363e9a68 we track backing chain metadata when creating snapshots the right way even for the inactive configuration. As we did not yet update other code paths that modify the backing chain (blockpull) the newDef backing chain gets out of sync. After stopping of a VM the new definition gets copied to the next start one. The new VM then has incorrect backing chain info. This patch switches the backing chain detector to always purge the existing backing chain and forces re-detection to avoid this issue until we'll have full backing chain tracking support. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1144922
-
- 25 9月, 2014 3 次提交
-
-
由 Pavel Hrdina 提交于
Use the universal tunable event to report changes to user. All blkdeviotune values are prefixed with "blkdeviotune". Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Pavel Hrdina 提交于
When you updated some blkdeviotune values for running domain the values were stored only internally, but not saved into the live XML so they won't survive restarting the libvirtd. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
由 Michal Privoznik 提交于
And add stubs to other drivers like: lxc, qemu, uml and vbox. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
- 24 9月, 2014 5 次提交
-
-
由 Ján Tomko 提交于
Format the segment offloading options specified by <driver> <host .../> <guest .../> </driver> on virtio-net command line.
-
由 Peter Krempa 提交于
Request erroring out from the backing chain traveller and drop qemu's internal backing chain integrity tester. The backing chain traveller reports errors by itself with possibly more detail than qemuDiskChainCheckBroken ever could. We also need to make sure that we reconnect to existing qemu instances even at the cost of losing the backing chain info (this really should be stored in the XML rather than reloaded from disk, but that needs some work).
-
由 Peter Krempa 提交于
Reuse virStorageSourceIsEmpty and rename "force" argument to "force_probe".
-
由 Peter Krempa 提交于
Add a new parameter to virStorageFileGetMetadata that will break the backing chain detection process and report useful error message rather than having to use virStorageFileChainGetBroken. This patch just introduces the option, usage will be provided separately.
-
由 Pavel Hrdina 提交于
Now we have universal tunable event so we can use it for reporting changes to user. The cputune values will be prefixed with "cputune" to distinguish it from other tunable events. Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 23 9月, 2014 8 次提交
-
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Michal Privoznik 提交于
In the function at one place we check if def->cpu is NULL prior to accessing def->cpu->ncells. Then, later in the code, def->cpu->ncells is accessed directly, without the check. This makes coverity unhappy, because the first check makes it think def->cpu can be NULL. However, the function is not called if def->cpu is NULL. Therefore, remove the first check and hopefully make coverity cheer again. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michael R. Hines 提交于
RDMA Live migration requires registering memory with the hardware, and thus QEMU offers a new 'capability' to pre-register / mlock() the guest memory in advance for higher RDMA performance before the migration begins. This capability is disabled by default, which means QEMU will register the memory with the hardware in an on-demand basis. This patch exposes this capability with the following example usage: virsh migrate --live --rdma-pin-all --migrateuri rdma://hostname domain qemu+ssh://hostname/systemSigned-off-by: NMichael R. Hines <mrhines@us.ibm.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Michael R. Hines 提交于
This patch adds support for RDMA protocol in migration URIs. USAGE: $ virsh migrate --live --migrateuri rdma://hostname domain qemu+ssh://hostname/system Since libvirt runs QEMU in a pretty restricted environment, several files needs to be added to cgroup_device_acl (in qemu.conf) for QEMU to be able to access the host's infiniband hardware. Full documenation of the feature can be found on QEMU wiki: http://wiki.qemu.org/Features/RDMALiveMigrationSigned-off-by: NMichael R. Hines <mrhines@us.ibm.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Currently we only support TCP protocol for native QEMU migration but this is going to be changed. Let's make the code more general and remove hardcoded TCP protocol from several places. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
For compatibility with old libvirt we need to support both tcp:host and tcp://host migration URIs. Let's make the code that parses them a bit cleaner. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Michael R. Hines 提交于
RDMA migration uses the 'setup' state in QEMU to optionally lock all memory before the migration starts. The total time spent in this state is exposed as VIR_DOMAIN_JOB_SETUP_TIME. Additionally, QEMU also exports migration throughput (mbps) for both memory and disk, so let's add them too: VIR_DOMAIN_JOB_MEMORY_BPS, VIR_DOMAIN_JOB_DISK_BPS. Signed-off-by: NMichael R. Hines <mrhines@us.ibm.com> Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
- 22 9月, 2014 6 次提交
-
-
由 Giuseppe Scrivano 提交于
commit 72f919f5 introduced an user friendly error message when trying to use IDE disks as readonly. Do the same thing for the SATA bus. Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1112939Signed-off-by: NGiuseppe Scrivano <gscrivan@redhat.com>
-
由 Peter Krempa 提交于
-
由 Peter Krempa 提交于
Move them to the single corresponding function rather than having them in the common chunk of code.
-
由 Peter Krempa 提交于
Split out the call to the update method only to places where it is actually used rather than having a mega-method that does all the stuff.
-
由 Peter Krempa 提交于
Add a new parameter that will allow to return the XML stored in the save image for further manipulation and adjust the callers. This option will be used in later patches.
-
由 Peter Krempa 提交于
Extract code used to check save image XMLs provided by users to separate use.
-
- 19 9月, 2014 4 次提交
-
-
由 John Ferlan 提交于
Mimic the "Disk" processing for 'rawio', but for a scsi_host hostdev lun device.
-
由 John Ferlan 提交于
Adjust disk definition for 'rawio' to use the TristateBool logic
-
由 John Ferlan 提交于
Commit id '9a2f36ec' added a build conditional of CAP_SYS_RAWIO in order to determine whether or not a disk definition using rawio should be allowed on platforms without CAP_SYS_RAWIO. If one was found, virReportError was used but the code didn't goto cleanup. This patch adds the goto.
-
由 Pavel Hrdina 提交于
We are not detecting the presence of FIPS from QEMU, but from procfs and that means it's not QEMU capability. It was decided that we will pass this flag to QEMU even if it's not supported by old QEMU binaries. This patch also reverts changes done by commit a21cfb0f to qemucapabilitestest and implements a new test case in qemuxml2argvtest. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
-
- 18 9月, 2014 7 次提交
-
-
由 Ján Tomko 提交于
Plug a memory leak and silence a warning.
-
由 John Ferlan 提交于
If the qemu being used doesn't support JSON, then querying for IOThread data would fail. In that case, ensure the *iothreads is NULL and return 0 as the count of iothreads available.
-
由 Roman Bogorodskiy 提交于
Currently, build with clang fails with: CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo qemu/qemu_command.c:6580:58: error: implicit conversion from enumeration type 'virMemAccess' to different enumeration type 'virTristateSwitch' [-Werror,-Wenum-conversion] virTristateSwitch memAccess = def->cpu->cells[i].memAccess; ~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~ 1 error generated. Fix that by using virMemAccess instead of virTristateSwitch.
-
由 Roman Bogorodskiy 提交于
Commit f05b6a91 added virQEMUDriverConfigPtr argument to the virQEMUCapsFillDomainCaps function and it uses forward declaration of virQEMUDriverConfig and virQEMUDriverConfigPtr that casues clang build to fail: gmake[3]: Entering directory `/usr/home/novel/code/libvirt/src' CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo In file included from qemu/qemu_capabilities.c:43: In file included from qemu/qemu_hostdev.h:27: qemu/qemu_conf.h:63:37: error: redefinition of typedef 'virQEMUDriverConfig' is a C11 feature [-Werror,-Wtypedef-redefinition] typedef struct _virQEMUDriverConfig virQEMUDriverConfig; ^ qemu/qemu_capabilities.h:328:37: note: previous definition is here typedef struct _virQEMUDriverConfig virQEMUDriverConfig; ^ Fix that by passing loader and nloader config attributes directly instead of passing complete config.
-
由 Ján Tomko 提交于
Commit f36a94f2 introduced a double free on all success paths in qemuSharedDeviceEntryInsert. Only call qemuSharedDeviceEntryFree on the error path and set entry to NULL before jumping there if the entry already is in the hash table. https://bugzilla.redhat.com/show_bug.cgi?id=1142722
-
由 Peter Krempa 提交于
Now that we have a simple function to check locality of storage, reuse it in qemuDomainCheckDiskPresence(). Also reuse check for empty storage source.
-
由 Peter Krempa 提交于
The formatted UUID isn't used anywhere else in qemuDomainCheckDiskStartupPolicy. Drop it.
-