提交 da7799d8 编写于 作者: P Pavel Hrdina

Move the FIPS detection from capabilities

We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.

This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431Signed-off-by: NPavel Hrdina <phrdina@redhat.com>
上级 ba7468db
......@@ -3215,30 +3215,6 @@ virQEMUCapsInitQMP(virQEMUCapsPtr qemuCaps,
config.data.nix.path = monpath;
config.data.nix.listen = false;
/* Qemu 1.2 and later have a binary flag -enable-fips that must be
* used for VNC auth to obey FIPS settings; but the flag only
* exists on Linux, and with no way to probe for it via QMP. Our
* solution: if FIPS mode is required, then unconditionally use
* the flag, regardless of qemu version, for the following matrix:
*
* old QEMU new QEMU
* FIPS enabled doesn't start VNC auth disabled
* FIPS disabled/missing VNC auth enabled VNC auth enabled
*
* Setting the flag here instead of in virQEMUCapsInitQMPMonitor
* or virQEMUCapsInitHelp also allows the testsuite to be
* independent of FIPS setting.
*/
if (virFileExists("/proc/sys/crypto/fips_enabled")) {
char *buf = NULL;
if (virFileReadAll("/proc/sys/crypto/fips_enabled", 10, &buf) < 0)
goto cleanup;
if (STREQ(buf, "1\n"))
virQEMUCapsSet(qemuCaps, QEMU_CAPS_ENABLE_FIPS);
VIR_FREE(buf);
}
VIR_DEBUG("Try to get caps via QMP qemuCaps=%p", qemuCaps);
/*
......
......@@ -3293,6 +3293,35 @@ qemuCheckDiskConfig(virDomainDiskDefPtr disk)
}
/* Qemu 1.2 and later have a binary flag -enable-fips that must be
* used for VNC auth to obey FIPS settings; but the flag only
* exists on Linux, and with no way to probe for it via QMP. Our
* solution: if FIPS mode is required, then unconditionally use
* the flag, regardless of qemu version, for the following matrix:
*
* old QEMU new QEMU
* FIPS enabled doesn't start VNC auth disabled
* FIPS disabled/missing VNC auth enabled VNC auth enabled
*/
bool
qemuCheckFips(void)
{
bool ret = false;
if (virFileExists("/proc/sys/crypto/fips_enabled")) {
char *buf = NULL;
if (virFileReadAll("/proc/sys/crypto/fips_enabled", 10, &buf) < 0)
return ret;
if (STREQ(buf, "1\n"))
ret = true;
VIR_FREE(buf);
}
return ret;
}
char *
qemuBuildDriveStr(virConnectPtr conn,
virDomainDiskDefPtr disk,
......@@ -7543,7 +7572,8 @@ qemuBuildCommandLine(virConnectPtr conn,
virDomainSnapshotObjPtr snapshot,
virNetDevVPortProfileOp vmop,
qemuBuildCommandLineCallbacksPtr callbacks,
bool standalone)
bool standalone,
bool enableFips)
{
virErrorPtr originalError = NULL;
size_t i, j;
......@@ -7656,7 +7686,7 @@ qemuBuildCommandLine(virConnectPtr conn,
if (!standalone)
virCommandAddArg(cmd, "-S"); /* freeze CPU */
if (virQEMUCapsGet(qemuCaps, QEMU_CAPS_ENABLE_FIPS))
if (enableFips)
virCommandAddArg(cmd, "-enable-fips");
if (qemuBuildMachineArgStr(cmd, def, qemuCaps) < 0)
......
......@@ -78,7 +78,8 @@ virCommandPtr qemuBuildCommandLine(virConnectPtr conn,
virDomainSnapshotObjPtr current_snapshot,
virNetDevVPortProfileOp vmop,
qemuBuildCommandLineCallbacksPtr callbacks,
bool forXMLToArgv)
bool forXMLToArgv,
bool enableFips)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(11);
/* Generate '-device' string for chardev device */
......@@ -273,4 +274,7 @@ int qemuGetDriveSourceString(virStorageSourcePtr src,
char **source);
int qemuCheckDiskConfig(virDomainDiskDefPtr disk);
bool
qemuCheckFips(void);
#endif /* __QEMU_COMMAND_H__*/
......@@ -6127,7 +6127,8 @@ static char *qemuConnectDomainXMLToNative(virConnectPtr conn,
NULL, -1, NULL,
VIR_NETDEV_VPORT_PROFILE_OP_NO_OP,
&buildCommandLineCallbacks,
true)))
true,
qemuCheckFips())))
goto cleanup;
ret = virCommandToString(cmd);
......
......@@ -4306,7 +4306,8 @@ int qemuProcessStart(virConnectPtr conn,
if (!(cmd = qemuBuildCommandLine(conn, driver, vm->def, priv->monConfig,
priv->monJSON, priv->qemuCaps,
migrateFrom, stdin_fd, snapshot, vmop,
&buildCommandLineCallbacks, false)))
&buildCommandLineCallbacks, false,
qemuCheckFips())))
goto cleanup;
/* now that we know it is about to start call the hook if present */
......
......@@ -112,7 +112,6 @@
<flag name='usb-storage'/>
<flag name='usb-storage.removable'/>
<flag name='kvm-pit-lost-tick-policy'/>
<flag name='enable-fips'/>
<flag name='usb-kbd'/>
<flag name='host-pci-multidomain'/>
<flag name='usb-audio'/>
......
......@@ -138,7 +138,6 @@
<flag name='boot-strict'/>
<flag name='pvpanic'/>
<flag name='reboot-timeout'/>
<flag name='enable-fips'/>
<flag name='spice-file-xfer-disable'/>
<flag name='spiceport'/>
<flag name='usb-kbd'/>
......
......@@ -31,7 +31,6 @@ typedef testQemuData *testQemuDataPtr;
struct _testQemuData {
virDomainXMLOptionPtr xmlopt;
const char *base;
bool fips;
};
static qemuMonitorTestPtr
......@@ -143,12 +142,6 @@ testQemuCaps(const void *opaque)
qemuMonitorTestGetMonitor(mon)) < 0)
goto cleanup;
/* So that our test does not depend on the contents of /proc, we
* hoisted the setting of ENABLE_FIPS to virQEMUCapsInitQMP. But
* we do want to test the effect of that flag. */
if (data->fips)
virQEMUCapsSet(capsComputed, QEMU_CAPS_ENABLE_FIPS);
if (testQemuCapsCompare(capsProvided, capsComputed) < 0)
goto cleanup;
......@@ -183,19 +176,18 @@ mymain(void)
data.xmlopt = xmlopt;
#define DO_TEST_FULL(name, use_fips) \
data.base = name; \
data.fips = use_fips; \
if (virtTestRun(name, testQemuCaps, &data) < 0) \
ret = -1
#define DO_TEST(name) DO_TEST_FULL(name, false)
#define DO_TEST(name) \
do { \
data.base = name; \
if (virtTestRun(name, testQemuCaps, &data) < 0) \
ret = -1; \
} while (0)
DO_TEST_FULL("caps_1.2.2-1", true);
DO_TEST("caps_1.2.2-1");
DO_TEST("caps_1.3.1-1");
DO_TEST("caps_1.4.2-1");
DO_TEST("caps_1.5.3-1");
DO_TEST_FULL("caps_1.6.0-1", true);
DO_TEST("caps_1.6.0-1");
DO_TEST("caps_1.6.50-1");
virObjectUnref(xmlopt);
......
LC_ALL=C PATH=/bin HOME=/home/test USER=test LOGNAME=test QEMU_AUDIO_DRV=none \
/usr/bin/qemu \
-S -enable-fips -M pc -m 214 -smp 1 -nographic -monitor \
unix:/tmp/test-monitor,server,nowait -no-acpi -boot c -usb \
-hda /dev/HostVG/QEMUGuest1 -net none -serial \
none -parallel none
<domain type='qemu'>
<name>QEMUGuest1</name>
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
<memory unit='KiB'>219100</memory>
<currentMemory unit='KiB'>219100</currentMemory>
<vcpu placement='static' cpuset='1-4,8-20,525'>1</vcpu>
<os>
<type arch='i686' machine='pc'>hvm</type>
<boot dev='hd'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>destroy</on_crash>
<devices>
<emulator>/usr/bin/qemu</emulator>
<disk type='block' device='disk'>
<source dev='/dev/HostVG/QEMUGuest1'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<controller type='ide' index='0'/>
<memballoon model='virtio'/>
</devices>
</domain>
......@@ -259,6 +259,7 @@ typedef enum {
FLAG_EXPECT_FAILURE = 1 << 1,
FLAG_EXPECT_PARSE_ERROR = 1 << 2,
FLAG_JSON = 1 << 3,
FLAG_FIPS = 1 << 4,
} virQemuXML2ArgvTestFlags;
static int testCompareXMLToArgvFiles(const char *xml,
......@@ -360,7 +361,8 @@ static int testCompareXMLToArgvFiles(const char *xml,
(flags & FLAG_JSON), extraFlags,
migrateFrom, migrateFd, NULL,
VIR_NETDEV_VPORT_PROFILE_OP_NO_OP,
&testCallbacks, false))) {
&testCallbacks, false,
(flags & FLAG_FIPS)))) {
if (!virtTestOOMActive() &&
(flags & FLAG_EXPECT_FAILURE)) {
ret = 0;
......@@ -443,6 +445,9 @@ testCompareXMLToArgvHelper(const void *data)
if (virQEMUCapsGet(info->extraFlags, QEMU_CAPS_MONITOR_JSON))
flags |= FLAG_JSON;
if (virQEMUCapsGet(info->extraFlags, QEMU_CAPS_ENABLE_FIPS))
flags |= FLAG_FIPS;
result = testCompareXMLToArgvFiles(xml, args, info->extraFlags,
info->migrateFrom, info->migrateFd,
flags);
......@@ -1455,6 +1460,8 @@ mymain(void)
DO_TEST("panic", QEMU_CAPS_DEVICE_PANIC,
QEMU_CAPS_DEVICE, QEMU_CAPS_NODEFCONFIG);
DO_TEST("fips-enabled", QEMU_CAPS_ENABLE_FIPS);
virObjectUnref(driver.config);
virObjectUnref(driver.caps);
virObjectUnref(driver.xmlopt);
......
......@@ -119,7 +119,7 @@ static int testCompareXMLToArgvFiles(const char *xml,
vmdef, &monitor_chr, json, extraFlags,
migrateFrom, migrateFd, NULL,
VIR_NETDEV_VPORT_PROFILE_OP_NO_OP,
&testCallbacks, false)))
&testCallbacks, false, false)))
goto fail;
if (!virtTestOOMActive()) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册