Also free the backends array, not just its members.

Fixes: d3f9dda2Signed-off-by: NJán Tomko <jtomko@redhat.com>

It is no longer used.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit 6864d8f7 moved this one level up
for qemuBuildMemoryBackendProps but left qemuBuildMemPathStr intact.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Use qemuBuildMemoryGetDefaultPagesize.

Fixes: 6864d8f7Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit 5b9819ee started using the virFileWrapper APIs in
the test program, and correctly called them only in the section
of code guarded by WITH_QEMU; however, a single call to the
virFileWrapperClearPrefixes() function ended up in the
hypervisor-agnostic section, causing a build failure on MinGW.

Move the call to the QEMU-only section; while at it, also drop
the virFileWrapperRemovePrefix() calls, which are entirely
redundant since we'd drop all prefixes immediately afterwards
anyway.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>

If a management application wants to use firmware auto selection
feature it can't currently know if the libvirtd it's talking to
support is or not. Moreover, it doesn't know which values that
are accepted for the @firmware attribute of <os/> when parsing
will allow successful start of the domain later, i.e. if the mgmt
application wants to use 'bios' whether there exists a FW
descriptor in the system that describes bios.

This commit then adds 'firmware' enum to <os/> element in
<domainCapabilities/> XML like this:

  <enum name='firmware'>
    <value>bios</value>
    <value>efi</value>
  </enum>

We can see both 'bios' and 'efi' listed which means that there
are descriptors for both found in the system (matched with the
machine type and architecture reported in the domain capabilities
earlier and not shown here).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

The point of this API is to fetch all FW descriptors, parse them
and return list of supported interfaces and SMM feature for given
combination of machine type and guest architecture.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

This part of the code will be reused later.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

This piece of code will be reused later.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

This reverts commit a5e16020.

Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

'viralloc.h' does not provide any type or macro which would be necessary
in headers. Prevent leakage of the inclusion.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Keeping them with viralloc.h forcibly pulls in the other stuff from
viralloc.h into other header files. This in turn creates a mess
as more and more headers pull in the 'viral' header file.

If we want to make 'viralloc.h' omnipresent we should pick a different
approach.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Define VMX_CONFIG_FORMAT_ARGV to replace the hardcoded 'vmware-vmx'
string used by the domxml-X-native APIs. This follows the pattern used
by other drivers.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NHan Han <hhan@redhat.com>

There was this introduction made on the users list:

https://www.redhat.com/archives/libvirt-users/2019-March/msg00046.html

Add the application onto the list of apps known to use libvirt.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>

Now that the memory disposal is handled automatically we can simplify
the cleanup paths. In this case it's not as simple as sometimes the
value of the called function is returned.

While at it fix the initialization value of the returned variable.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The later is the correct CPU model name.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

This commit fixes an unitialized variable to avoid garbage value
when virNetDevBridgeGet method returns error. When, that method fails
before initialize 'val' variable, it can cause problems related to
that.
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Commit b647d219 introduced a use-after-free situation when the caller
is trying to delete a snapshot and its children: if the callback
function deletes the parent, it is no longer safe to query the parent
to learn which children also need to be deleted (where we previously
saved deleting the parent for last).  To fix the problem, while still
maintaining support for topological visits of callback functions, we
have to stash off any information needed for later traversal prior to
using a callback function (virDomainMomentForEachChild already does
this, it is only virDomainMomentActOnDescendant that was running into
problems).

Sadly, the testsuite did not cover the problem at the time. Worse,
even though I later added commit 280a2b41 to catch problems like
this, and even though that test is indeed sufficient to detect the
problem when run under valgrind or suitable MALLOC_PERTURB_ settings,
I'm guilty of not running the test in such an environment.  Thus,
v5.2.0 has a regression that could have been prevented had we used the
testsuite to its full power. On the bright side, deleting snapshots
requires ACL domain:snapshot, which is arguably as powerful as
domain:write, so I don't think this use-after-free forms a security
hole.

At some point, it would be nice to convert virDomainMomentObj into a
virObject, at which point, the solution is even simpler: add
virObjectRef/Unref around the callback. But as that will require
auditing even more places in the code, I went with the simplest patch
for the regression fix.

Fixes: b647d219Reported-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Tested-by: NRoman Bogorodskiy <bogorodskiy@gmail.com>

A feature with no cpuid element is invalid and it should not be silently
treated as a feature with all CPUID bits set to zero.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The microcode version checks are used to invalidate cached CPU data we
get from QEMU. To minimize /proc/cpuinfo parsing the microcode version
was only read when libvirtd started and cached for the daemon's
lifetime. However, the CPU microcode can change anytime (updating the
microcode package can automatically upload it to the CPU) and we need to
stop caching it to avoid using stale CPU model data.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This helper has solely to do with virObjects. Move it together with
other virObject stuff.

This also avoids the potential problem where VIR_AUTOUNREF uses
virObjectAutoUnref which is defined in virobject.h.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Now that all the examples are warning free, keep it that way by enabling
all the normal compiler warning flags.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

The example currently assumes that a NULL URI will open Xen and thus
also assumes that a domain with ID 0 exists. Change it to require the
URI and a domain name as command line arguments.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

Jumping over the declaration and initialization of a variable is bad as
it means the jump target sees a potentially non-initialized variable.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

libvirt.org/search.php drops into some kind of screen which I guess
is supposed to show a search bar with options, but presently for me
renders as nothing but the following text:

Search the documentation on Libvirt.org

The search service indexes the libvirt APIs and documentation as well as the libvir-list@redhat.com mailing-list archives. To use it simply provide a set of keywords:

The main page search bar now redirects to google, this page is broken,
I say we just remove it and move on.
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This was used for generating the website search, which now just calls
out to google. Remove it
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The website search is perpetually broken, has had XSS issues in the
past, and I suspect when it's working it's not as fast or capable as
a simple google site:libvirt.org search

Replace the <form> implementation with one that sends the user to
google.com with 'site:libvirt.org' appended to the search string
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Acked-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Acked-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Acked-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Acked-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

If we see it, skip all remaining header guard checks
Acked-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Acked-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

In a constrained CI environment, where it is intentional that attempts
to write outside the current directory will fail, virsh-snapshot was
failing:

@@ -1,2 +1,3 @@
 error: invalid argument: parent s3 for snapshot s2 not found
 error: marker
+error: Failed to create '/home/travis/.cache/libvirt/virsh': Permission denied
FAIL virsh-snapshot (exit status: 1)

But we've already solved the problem in virsh-uriprecedence: tell
virsh to use XDG locations pointing to somewhere we can write rather
than its default of falling back to $HOME with the test being at risk
of breaking due to the user's environment and/or unacceptably altering
the user's normal cache.  Hoist that solution into test-lib.sh, so
that all scripts can use it as needed. While at it, fix a latent typo
where XDG_RUNTIME_HOME was set to a literal relative directory name
"XDG_CACHE_HOME" (the typo did not affect virsh-uriprecedence, but
could matter to other clients).

Fixes: 280a2b41
Fixes: 398de147Reported-by: NDaniel P. Berrangé <berrange@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The search.cpan.org site is a transparent redirect to metacpan.org these
days, so we should just point directly to the new site.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

On the modern internet it is not credible to continue to advertize
software downloads over unencrypted connections. Even if users could
theoretically use GPG to verify the signatures, not all our downloads
are signed and few people know how to correctly verify signatures.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>