Ensure unexpected values are dealt with correctly, that
is by invoking virReportEnumRangeError() and immediately
returning a negative value to the caller.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Device validation should not have to wait until command line
generation time. Moving the code to a separate function also
allows us to avoid some unnecessary repetition.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In refactoring the snapshot code to prepare for checkpoints, I changed
qemuDomainMomentDiscardAll to take a callback that would handle the
cleanup of either a snapshot or a checkpoint, but failed to set the
callback on one of the two snapshot callers.  As a result, 'virsh
undefine $dom --snapshots-metadata' crashed on a NULL function
dereference.

Fixes: a487890d
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1707708Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name 'current', and rewrite VIR_CLASS_NEW to call the new
macro with the hard-coded name 'parent', it seems less confusing if
all object code uses similar naming. Thus, this is a mechanical rename
in preparation of making virDomainSnapshotDef a descendent of
virObject.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

VIR_CLASS_NEW insists that descendents of virObject have 'parent' as
the name of their inherited base class member at offset 0. While it
would be possible to write a new class-creation macro that takes the
actual field name, and rewrite VIR_CLASS_NEW to call the new macro
with the hard-coded name 'parent', so that we could make
virDomainMomentDef use a custom name for its base class, it seems less
confusing if all object code uses similar naming. Thus, this is a
mechanical rename in preparation of making virDomainSnapshotDef a
descendent of virObject, when we can no longer use 'parent' for a
different purpose than the base class.
Signed-off-by: NEric Blake <eblake@redhat.com>
Acked-by: NPeter Krempa <pkrempa@redhat.com>

Use qemuDomainStorageSourceAccessModify with correct flags to do the
job.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Some operations e.g. namespace setup are not necessary when modifying
access to a file which the VM can already access. Add a flag which
allows to skip them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In some cases when we need to modify access permissions for a storage
source which is already used by the VM we should not revoke all
permissions on a failure. Allow this in qemuDomainStorageSourceAccessModify
by adding a new flag.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Rather than jumping to the correct label use a set of booleans to
determine which operation needs to be rolled back. This will allow more
flexibility when e.g. rollback after a failed operation will not be
necessary/desired.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a new flag which will set the image as read-only even if the image
data allows writing.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use qemuDomainStorageSourceAccessModify instead of the individual calls.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a new flag QEMU_DOMAIN_STORAGE_SOURCE_ACCESS_CHAIN to select whether
to work on single image or full chain.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Upcoming patches will add a few more flags. Add an enum to collect them
so that we don't end up with multiple bools.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function will be able to deal with non-chains too so drop 'Chain'
and also change the suffix to 'Modify' as it's used both for setup and
teardown.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce qemuDomainStorageSourceChainAccess(Allow|Revoke) as entry
points to qemuDomainStorageSourceChainAccessPrepare for symmetry with
the functions for single backing chain elements.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Move it to qemu_domain.c and call it
qemuDomainStorageSourceChainAccessPrepare.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use qemuDomainStorageSourceAccess(Allow|Revoke) instead.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.
Signed-off-by: NEric Blake <eblake@redhat.com>

This requires drivers to opt in to handle the raw modelstr
network model, all others will error if a passed in XML value
is not in the model enum.

Enable this feature for libxl/xen/xm and qemu drivers
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This converts the qemu driver to the net model enum, for all
the model values that we have hardcoded for various checks,
which adds e1000e, virtio-transitional, virtio-non-transitional,
usb-net, spapr-vlan, lan9118, smc91c111

Because the qemu driver has historically also allowed the raw
model string onto the qemu command line, this isn't a full
conversion. Unwinding that will require more thought. However
for all new driver code we should be adding explicit enum
values for any model name we have special handling for.

Remove the now unused virDomainNetStreqModelString
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

To ease converting the net->model value to an enum, add
the wrapper functions:

virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The NVIDIA V100 GPU has an onboard RAM that is mapped into the
host memory and accessible as normal RAM via an NVLink2 bridge. When
passed through in a guest, QEMU puts the NVIDIA RAM window in a
non-contiguous area, above the PCI MMIO area that starts at 32TiB.
This means that the NVIDIA RAM window starts at 64TiB and go all the
way to 128TiB.

This means that the guest might request a 64-bit window, for each PCI
Host Bridge, that goes all the way to 128TiB. However, the NVIDIA RAM
window isn't counted as regular RAM, thus this window is considered
only for the allocation of the Translation and Control Entry (TCE).
For more information about how NVLink2 support works in QEMU,
refer to the accepted implementation [1].

This memory layout differs from the existing VFIO case, requiring its
own formula. This patch changes the PPC64 code of
@qemuDomainGetMemLockLimitBytes to:

- detect if we have a NVLink2 bridge being passed through to the
guest. This is done by using the @ppc64VFIODeviceIsNV2Bridge function
added in the previous patch. The existence of the NVLink2 bridge in
the guest means that we are dealing with the NVLink2 memory layout;

- if an IBM NVLink2 bridge exists, passthroughLimit is calculated in a
different way to account for the extra memory the TCE table can alloc.
The 64TiB..128TiB window is more than enough to fit all possible
GPUs, thus the memLimit is the same regardless of passing through 1 or
multiple V100 GPUs.

Further reading explaining the background
[1] https://lists.gnu.org/archive/html/qemu-devel/2019-03/msg03700.html
[2] https://www.redhat.com/archives/libvir-list/2019-March/msg00660.html
[3] https://www.redhat.com/archives/libvir-list/2019-April/msg00527.htmlSigned-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The NVLink2 support in QEMU implements the detection of NVLink2
capable devices by verifying the attributes of the VFIO mem region
QEMU allocates for the NVIDIA GPUs. To properly allocate an
adequate amount of memLock, Libvirt needs this information before
a QEMU instance is even created, thus querying QEMU is not
possible and opening a VFIO window is too much.

An alternative is presented in this patch. Making the following
assumptions:

- if we want GPU RAM to be available in the guest, an NVLink2 bridge
must be passed through;

- an unknown PCI device can be classified as a NVLink2 bridge
if its device tree node has 'ibm,gpu', 'ibm,nvlink',
'ibm,nvlink-speed' and 'memory-region'.

This patch introduces a helper called @ppc64VFIODeviceIsNV2Bridge
that checks the device tree node of a given PCI device and
check if it meets the criteria to be a NVLink2 bridge. This
new function will be used in a follow-up patch that, using the
first assumption, will set up the rlimits of the guest
accordingly.
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Standardize on putting the _LAST enum value on the second line
of VIR_ENUM_IMPL invocations. Later patches that add string labels
to VIR_ENUM_IMPL will push most of these to the second line anyways,
so this saves some noise.
Signed-off-by: NCole Robinson <crobinso@redhat.com>

This reverts commit a5e16020.

Getting rid of unistd.h from our headers will require more work than
just fixing the broken mingw build. Revert it until I have a more
complete proposal.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

util/virutil.h bogously included unistd.h. Drop it and replace it by
including it directly where needed.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Map is based on existing cases in code where we send suspended
event after changing domain state to paused.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NNikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>

It always returns true.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Drop the local call in favor of passing in xmlopt.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When adding <migrationSource> I've used a slightly unusual approach. To
allow using the disk source XML parser and formatter convert
<migrationSource> to look like <disk>. This means that <source> will be
added as a subelement of <migrationSource> rather than being formatted
inline.

Conversion from the old format in the parser is very simple as it
involves only moving the XPath context current node slightly if the new
format is found.

The status XML to XML test shows that the upgrade is done correctly.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

All callers including transitive callers through
virDomainDiskSourceFormatInternal always pass true. Remove the argument.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Using copy_on_read for removable disks is a hassle. It also does not
work for CDROMs at all as the image is supposed to be read-only and we
might ignore it for floppies when they are started as empty. Forbid it
for floppies completely rather than trying to support what probably
nobody is using.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Convert the other string comparisons to use the macro.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

Check that the attribute is the same in qemuDomainDiskChangeSupported
in case somebody tries to change it using the UpdateDevice API.

https://bugzilla.redhat.com/show_bug.cgi?id=1601677Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>

A macro for comparing string fields of the disk.

https://bugzilla.redhat.com/show_bug.cgi?id=1601677Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NLaine Stump <laine@laine.org>