virAdmConnect was named after virConnect, but after some discussions,
most of the APIs called will be working with remote daemon and starting
them virAdmDaemon will make more sense.  Only possibly controversal name
is CloseCallback (de)registration, and connecting to the daemon (which
will still be Open/Close), but even this makes sense if one thinks about
the daemon being opened and closed, e.g. as file, etc.

This way all the APIs working with the daemon will start with
virAdmDaemon prefix, they will accept virAdmDaemonPtr as first parameter
and that will better suit with other namings as well (virDomain*,
virAdmServer*, etc.).

Because in virt-admin, the connection name does not refer to a struct
that would have a connect in its name, also adjust 'connname' in
clients.  And because it is not used anywhere in the vsh code, move it
from there into each client.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Use 'dead_error_condition' instead of 'dead_error_begin'

After my "client rpc: Report proper error for keepalive disconnections"
patch, virsh would no long print a warning when it closes a connection
to a daemon after a keepalive timeout. Although the warning

    virsh # 2015-09-15 10:59:26.729+0000: 642080: info :
    libvirt version: 1.2.19
    2015-09-15 10:59:26.729+0000: 642080: warning :
    virKeepAliveTimerInternal:143 : No response from client
    0x7efdc0a46730 after 1 keepalive messages in 2 seconds

was pretty ugly, it was still useful. This patch brings the useful part
back while making it much nicer:

virsh # error: Disconnected from qemu:///system due to keepalive timeout
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Currently, we set interactive mode as default possibly reverting the
setting after we parse the command line arguments. There's nothing
particulary wrong with that, but a call to vshReadlineInit is performed
always in the global initializer just because the default mode is interactive.
Rather than moving vshReadlineInit call somewhere else (because another client
might want to implement interactive mode only), we could make the decision
if we're about to run in interactive mode once the command line is parsed.

Commit a0b6a36f separated vshInitDebug from the original vshInit
(before virsh got split and vshInit became virshInit - commit 834c5720)
in order to be able to debug command line parsing.
After the parsing is finished, debugging is reinitialized to work properly.
There might as well be other features that require re-initialization as
the command line could specify parameters that override our defaults which
had been set prior to calling vshArgvParse.

As part of the effort to stay consistent, change the vshInit signature
from returning int to returning bool. Moreover, remove the
unnecessary error label as there is no cleanup that would make use of
it.

In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.

This will allow us to use vshError() to report errors from inside
vshCommandOpt*(), instead of replicating the same logic and error
messages all over the place.

We also have more context inside the vshCommandOpt*() functions,
for example the actual value used on the command line, which means
we can produce more detailed error messages.

vshCommandOptBool() is the exception here, because it's explicitly
designed not to report any error.

This aligns it to the other vshCommandOpt*() functions.

Use vshCommandOptUInt() instead of parsing the value as a signed
integer and checking whether it's positive afterwards.

Improve comments as well.

I missed this in the first time around, thanks Michal for noticing.

Some virsh commands have a size parameter, which is handled as scaled
integer.  We don't have any *feature* that would allow to use '-1' as
maximum size, so it's safe to reject any negative values for those
commands.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1159171Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit a0670aef caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:

$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option

and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one).  This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).

In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.

So this is a case of regression fixing by pure code deletion :)

* tools/virsh-domain.c (vshCommandOptDomainBy): Drop useless filter.
* tools/virsh-interface.c (vshCommandOptInterfaceBy): Likewise.
* tools/virsh-network.c (vshCommandOptNetworkBy): Likewise.
* tools/virsh-nwfilter.c (vshCommandOptNWFilterBy): Likewise.
* tools/virsh-secret.c (vshCommandOptSecret): Likewise.
* tools/virsh.h (vshCmdHasOption): Drop unused function.
* tools/virsh.c (vshCmdHasOption): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

After splitting out most of virsh command, some includes
are no longer needed.

Some files have the libXML includes despite not needing them.

When editing a domain with 'virsh edit' and failing validation, the
usual message pops up:

  Failed. Try again? [y,n,f,?]:

Turning off validation can be useful, mainly for testing (but other
purposes too), so this patch adds support for relaxing definition in
virsh-edit and makes 'virsh edit <domain>' more usable.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Commit 6b9964 enforces checking invalid use of VSH_OT_STRING with
VSH_OFLAG_REQ. This commit tries to do the same thing to stop using
VSH_OT_DATA without VSH_OFLAG_REQ and also fix existing misuse.
Signed-off-by: NHao Liu <hliu@redhat.com>

Each command that needs a connection causes a new connection to be
made.  Reconnecting after a command failed is pointless, mainly when
there is no other command to run.  Removeing three lines of code takes
care of that and keeps virsh working as it should.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Recent commit 12bd207e fixed few
VSH_OT_STRING options that should've been VSH_OT_DATA.  That lead me to
this commit that enforces people to check that newly added options have
proper type.  Thanks to virsh erroring out with error message, this will
immediately show up in 'make check' thanks to our virsh-synopsis test.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Even though vshCmddefOptParse() tried returning -1 if there was an
optional option specification that preceded a required one, it failed to
check that for boolean type options and options with VSH_OFLAG_REQ_OPT
flag set.  On the other hand, it makes sense that VSH_OT_ARGV is
specified at the end of the option list.

Returning -1 enforces the proper ordering thanks to virsh-synopsis test
in 'make check'.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

C guarantees that static variables are zero-initialized.  Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.

* tools/virsh-console.c (got_signal): Drop unused variable.
* tools/virsh-domain.c: Fix initialization.
* tools/virsh.c: Likewise.
* tools/virt-host-validate-common.c (virHostMsgWantEscape):
Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Debian wants to use 'sensible-editor' instead of vi other distros might
want to use other defaults. This avoids distro specific patches.

The parser accepts P and E, so the formatter should too.

* tools/virsh.c (vshPrettyCapacity): Handle larger units.
Signed-off-by: NEric Blake <eblake@redhat.com>

Expose the new flag just added to virDomainGetBlockJobInfo.
With --raw, the presence or absence of --bytes determines which
flag to use in the single API call.  Without --raw, the use of
--bytes forces an error if the server doesn't support it,
otherwise, the code tries to silently fall back to scaling the
MiB/s value.

My goal is to eventually also support --bytes in bandwidth mode;
but that's a bit further down the road (and needs a new API flag
added in libvirt.h first).

This changes the human output, but the previous patch added
raw output precisely so that we can have flexibility with the
human output.  For this commit, I used qemu-monitor-command to
force an unusual bandwidth, but the same will be possible once
qemu implements virDomainBlockCopy:

Before:
Block Copy: [100 %]    Bandwidth limit: 2 MiB/s
After:
Block Copy: [100 %]    Bandwidth limit: 1048577 bytes/s (1.000 MiB/s)

The cache avoids having to repeatedly checking whether the flag
works when talking to an older server, when multiple blockjob
commands are issued during a batch session and the user is
manually polling for job completion.

* tools/virsh.h (_vshControl): Add a cache.
* tools/virsh.c (cmdConnect, vshReconnect): Initialize the cache.
* tools/virsh-domain.c (opts_block_job): Add --bytes.
* tools/virsh.pod (blockjob): Document this.
Signed-off-by: NEric Blake <eblake@redhat.com>

resolves https://bugzilla.redhat.com/show_bug.cgi?id=1132305:

The error message for an out-of-range argument was confusing:

virsh -k 9999999999
error: option --k requires a positive numeric argument

After this patch, it is:

error: Invalid value for option -k
Signed-off-by: NEric Blake <eblake@redhat.com>

The error message contains one extra dash.

Let's just open the file right away and deal with errors. Moreover,
there's no reason to forbid logging to, e.g., a pipe.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.

To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the two bandwidth functions that use this helper introduce
vshCommandOptULWrap. Although currently the migrate-setspeed function
for the qemu driver will reject -1 as maximum.

Use virStrToLong_uip instead of virStrToLong_ui to reject negative
numbers in the helper. None of the callers expects the wraparound
"feature" for negative numbers.

Also add a function that allows wrapping of negative numbers as it might
be used in the future and be explicit about the new semantics in the
function docs.

Add 'Bhyve' in hypervisor list reported by 'virsh -V'
if it's compiled it.

Add calls to virFileActivateDirOverride so that the build dir
overrides are activated.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For now 'virsh quit' action like this:
--------------------------------
[root@localhost /]# virsh quit
[root@localhost /]#
--------------------------------
And 'virsh exit' action:
--------------------------------
[root@localhost /]# virsh exit

[root@localhost /]#
--------------------------------
There is a small difference('/n') between them.
According to manual said:
       quit, exit
           quit this interactive terminal

And in the code they all called cmdQuit func,
They should get same actions.
Signed-off-by: NLi Yang <liyang.fnst@cn.fujitsu.com>

Introducing keepalive similarly to Guannan around 2 years ago.  Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.

Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.

This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server).  If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Man page, help output and also parsing is sorted in order to find
options smoothly.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

I plan to add 'virsh event' to virsh-domain.c and 'virsh
net-event' to virsh-network.c; but as they will share quite
a bit of common boilerplate, it's better to set that up now
in virsh.c.

* tools/virsh.h (_vshControl): Add fields.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup): New
prototypes.
* tools/virsh.c (vshEventFd, vshEventOldAction, vshEventInt)
(vshEventTimeout): New helper variables and functions.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup):
Implement new functions.
(vshInit, vshDeinit, main): Manage event timeout.
Signed-off-by: NEric Blake <eblake@redhat.com>

Several virsh commands ask for a --timeout parameter in
seconds, then use it to control interfaces that operate on
millisecond limits; I also plan on adding a 'virsh event'
command that also does this.  Factor this into a common
function.

* tools/virsh.h (vshCommandOptTimeoutToMs): New prototype.
* tools/virsh.c (vshCommandOptTimeoutToMs): New function.
* tools/virsh-domain.c (cmdBlockCommit, cmdBlockCopy)
(cmdBlockPull, cmdMigrate): Use it.
(vshWatchJob): Adjust timeout scale.
Signed-off-by: NEric Blake <eblake@redhat.com>

Adding output to 'virsh --version=long' makes it easier to
tell if a distro built with particular libraries (it doesn't
tell you what a remote libvirtd is built with, but is still
better than nothing).  But we forgot to mention gluster.

* tools/virsh.c (vshShowVersion): Add gluster witness.
Signed-off-by: NEric Blake <eblake@redhat.com>