This brings it in line with the recommendations in HACKING.

Detected by Coverity.  Unlikely to hit unless the file contents
were corrupted.

* src/util/interface.c (ifaceRestoreMacAddress): Plug leak.

This patch fixes the compilation of netlink.c and interface.c on those
systems missing either libnl or that have an older linux/if_link.h
include file not supporting macvtap or VF_PORTS.

WITH_MACVTAP is '1' if newer include files were detected, '0' otherwise.

IFLA_PORT_MAX is defined in linux/if_link.h if yet more functionality is
supported.

In a second cleanup step this patch makes several interface functions from macvtap.c commonly available by moving them into interface.c and prefixing their names with 'iface'. Those functions taking Linux-specific structures as parameters are only visible on Linux.

ifaceRestoreMacAddress returns the return code from the ifaceSetMacAddr call and display an error message if setting the MAC address did not work. The caller is unchanged and still ignores the return code (which is ok).

The following patch addresses the problem that when a PASSTHROUGH
mode DIRECT NIC connection is made the MAC address of the NIC is
not automatically set and reset to the configured VM MAC and
back again.

The attached patch fixes this problem by setting and resetting the MAC
while remembering the previous setting while the VM is running.
This also works if libvirtd is restarted while the VM is running.

the patch passes make syntax-check

gcc only reports them when compiling with -O3.

And from all related macros and functions.

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

This patch that adds support for configuring 802.1Qbg and 802.1Qbh
switches. The 802.1Qbh part has been successfully tested with real
hardware. The 802.1Qbg part has only been tested with a (dummy)
server that 'behaves' similarly to how we expect lldpad to 'behave'.

The following changes were made during the development of this patch:

 - Merging Scott's v13-pre1 patch
 - Fixing endptr related bug while using virStrToLong_ui() pointed out
   by Jim Meyering
 - Addressing Jim Meyering's comments to v11
 - requiring mac address to the vpDisassociateProfileId() function to
   pass it further to the 802.1Qbg disassociate part (802.1Qbh untouched)
 - determining pid of lldpad daemon by reading it from /var/run/libvirt.pid
   (hardcode as is hardcode alson in lldpad sources)
 - merging netlink send code for kernel target and user space target
   (lldpad) using one function nlComm() to send the messages
 - adding a select() after the sending and before the reading of the
   netlink response in case lldpad doesn't respond and so we don't hang
 - when reading the port status, in case of 802.1Qbg, no status may be
   received while things are 'in progress' and only at the end a status
   will be there.
 - when reading the port status, use the given instanceId and vf to pick
   the right IFLA_VF_PORT among those nested under IFLA_VF_PORTS.
 - never sending nor parsing IFLA_PORT_SELF type of messages in the
   802.1Qbg case
 - iterating over the elements in a IFLA_VF_PORTS to pick the right
   IFLA_VF_PORT by either IFLA_PORT_PROFILE and given profileId
   (802.1Qbh) or IFLA_PORT_INSTANCE_UUID and given instanceId (802.1Qbg)
   and reading the current status in IFLA_PORT_RESPONSE.
 - recycling a previous patch that adds functionality to interface.c to
   - get the vlan identifier on an interface
   - get the flags of an interface and some convenience function to
     check whether an interface is 'up' or not (not currently used here)
 - adding function to determine the root physical interface of an
   interface. For example if a macvtap is linked to eth0.100, it will
   find eth0. Also adding a function that finds the vlan on the 'way to
   the root physical interface'
 - conveying the root physical interface name and index in case of 802.1Qbg
 - conveying mac address of macvlan device and vlan identifier in
   IFLA_VFINFO_LIST[ IFLA_VF_INFO[ IFLA_VF_MAC(mac), IFLA_VF_VLAN(vlan) ] ]
   to (future) lldpad via netlink
  - To enable build with --without-macvtap rename the
    [dis|]associatePortProfileId functions, prepend 'vp' before their
    name and make them non-static functions.
  - Renaming variable multicast to nltarget_kernel and inverting
    the logic
  - Addressing Jim Meyering's comments; this also touches existing
    code for example for correcting indentation of break statements or
    simplification of switch statements.
  - Renamed occurrencvirVirtualPortProfileDef to virVirtualPortProfileParamses
  - 802.1Qbg part prepared for sending a RTM_SETLINK and getting
    processing status back plus a subsequent RTM_GETLINK to
    get IFLA_PORT_RESPONSE.
    Note: This interface for 802.1Qbg may still change
  - [David Allan] move getPhysfn inside IFLA_VF_PORT_MAX to avoid
compiler
    warning when latest if_link.h isn't available
  - move from Stefan's 802.1Qb{g|h} XML v8 to v9
  - move hostuuid and vf index calcs to inside doPortProfileOp8021Qbh
  - remove debug fprintfs
  - use virGetHostUUID (thanks Stefan!)
  - fix compile issue when latest if_link.h isn't available
  - change poll timeout to 10s, at 1/8 intervals
     - if polling times out, log msg and return -ETIMEDOUT
  - Add Stefan's code for getPortProfileStatus
  - Poll for up to 2 secs for port-profile status, at 1/8 sec intervals:
     - if status indicates error, abort openMacvtapTap
     - if status indicates success, exit polling
     - if status is "in-progress" after 2 secs of polling, exit
       polling loop silently, without error

My patch finishes out the 802.1Qbh parts, which Stefan had mostly complete.
I've tested using the recent kernel updates for VF_PORT netlink msgs and
enic for Cisco's 10G Ethernet NIC.  I tested many VMs, each with several
direct interfaces, each configured with a port-profile per the XML.  VM-to-VM,
and VM-to-external work as expected.  VM-to-VM on same host (using same NIC)
works same as VM-to-VM where VMs are on diff hosts.  I'm able to change
settings on the port-profile while the VM is running to change the virtual
port behaviour.  For example, adjusting a QoS setting like rate limit.  All
VMs with interfaces using that port-profile immediatly see the effect of the
change to the port-profile.

I don't have a SR-IOV device to test so source dev is a non-SR-IOV device,
but most of the code paths include support for specifing the source dev and
VF index.  We'll need to complete this by discovering the PF given the VF
linkdev.  Once we have the PF, we'll also have the VF index.  All this info-
mation is available from sysfs.

Changes from v1 to v2:
- changed function name prefixes to 'iface' from previous 'Iface'

- Further to make make syntax-check pass:
 - indentation fix in interface.h
 - added entry to POTFILES.in

I am consolidating network interface related functions used in nwfilter
and macvtap code in utils/interface.c. All function names are prefixed
with 'Iface'. The following functions are now available through
interface.h:

int ifaceCtrl(const char *name, bool up);
int ifaceUp(const char *name);
int ifaceDown(const char *name);

int ifaceCheck(bool reportError, const char *ifname,
               const unsigned char *macaddr, int ifindex);

int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex);

I added 'int ifindex' as parameter to ifaceCheck to the original
function and modified the code accordingly.