Fix migration, broken in two different ways by the QEMU monitor
abstraction.  Note that the QEMU console emits a "\r\n" as the
line-ending.

* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.

Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend.  Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.

When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.

* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
  disable host audio for VNC display

* src/qemu/qemu_driver.c: Fix crash in scenario where XML
  parsing of hotplugged device failed & thus 'dev' is NULL

* src/qemu/qemu_monitor_text.c: Always print command and reply
  in qemuMonitorCommandWithHandler. Print all args in each monitor
  command API & remove redundant relpy printing

* src/qemu/qemu_monitor_text.h: Remove qemudMonitorCommand,
  qemudMonitorCommandWithFd, qemudMonitorCommandWithHandler,
  qemudMonitorCommandExtra low level APIs
* src/qemu/qemu_monitor_text.c: Replace s/qemud/qemuMonitor/

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
  qemuMonitorRemoveHostNetwork() command for removing host
  networks
* src/qemu/qemu_driver.c: Convert NIC hotplug methods over
  to use qemuMonitorRemoveHostNetwork()

* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
  from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
  API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddHostNetwork() method for adding host networks

* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
  args, and remove hardcoded 'nic' prefix. Leave it upto callers
  instead
* src/qemu/qemu_driver.c: Switch over to using the new
  qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddPCINetwork API for PCI network device hotplug

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
  APIs for processing file handles
* src/qemu/qemu_driver.c: Convert NIC hotplug method over to
  use   qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  API qemuMonitorAddPCIDisk()
* src/qemu/qemu_driver.c: Convert over to using the new
  qemuMonitorAddPCIDisk() method, and remove now obsolete
  qemudEscape() method

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
  qemuMonitorRemovePCIDevice() for removing PCI device
* src/qemu/qemu_driver.c: Convert all places removing PCI devices
  over to new qemuMonitorRemovePCIDevice() API

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  API qemuMonitorAddPCIHostDevice()
* src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice()
  for PCI host device hotplug

One API adds an exact device based on bus+dev, the other adds
any device matching vendor+product

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
  commands.
* src/qemu/qemu_driver.c: Switch over to using the new
    qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorAddUSBDisk() API
* src/qemu/qemu_driver.c: Switch USB disk hotplug to the new
  src/qemu/qemu_driver.c API.

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorMigrateToCommand() API
* src/qemu/qemu_driver.c: Switch over to using the
  qemuMonitorMigrateToCommand() API for core dumps and save
  to file APIs

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
  qemuMonitorMigrateToHost() for doing TCP migration
* src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost().
  Also handle proper URIs (tcp:// as well as tcp:)

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorGetMigrationStatus() command.
* src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus()
  command to check completion status.

* src/qemu/qemu_driver.c: Use new qemuMonitorSetMigrationSpeed()
  API during migration
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
  qemuMonitorSetMigrationSpeed() API

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
  qemuMonitorGetBlockStatsInfo() command
* src/qemu/qemu_driver.c: Remove directly use of blockstats in
  favour of calling qemuMonitorGetBlockStatsInfo()

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new APIs
  qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory()
* src/qemu/qemu_driver.c: Use the new qemuMonitorSaveVirtualMemory()
  and qemuMonitorSavePhysicalMemory() APIs

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new APis
  qemuMonitorChangeMedia and qemuMonitorEjectMedia. Pull in code
  for qemudEscape
* src/qemu/qemu_driver.c: Remove code that directly issues 'eject'
  and 'change' commands in favour of API calls.

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
  qemuMonitorSetBalloon() based on existing code in
  qemudDomainSetMemoryBalloon
* src/qemu/qemu_driver.c: Remove use of qemudDomainSetMemoryBalloon()
  in favour of qemuMonitorSetBalloon(). Fix error code when balloon
  is not supported

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Pull old
  qemudDomainGetMemoryBalloon() code into a new method called
  qemuMonitorGetBalloonInfo()
* src/qemu/qemu_driver.c: Update to call qemuMonitorGetBalloonInfo()
  and remove qemudDomainGetMemoryBalloon().

* src/qemu/qemu_driver.c: Remove use of 'system_powerdown'
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
  qemuMonitorSystemPowerdown() api call

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
  qemuMonitorStopCPUs() API
* src/qemu/qemu_driver.c: Replace direct monitor commands for 'stop'
  with qemuMonitorStopCPUs()

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Rename
  Rename qemudMonitorSendCont to qemuMonitorStartCPUs
* src/qemu/qemu_driver.c: Update callers for new name

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a
  new qemuMonitorSetVNCPassword() API
* src/qemu/qemu_driver.c: Refactor qemudInitPasswords to
  call qemuMonitorSetVNCPassword()

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
  qemuMonitorGetCPUInfo() command
* src/qemu/qemu_driver.c: Refactor qemudDetectVcpuPIDs to
  use qemuMonitorGetCPUInfo()

Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.

Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.

* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
  file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c

* src/qemu/qemu_driver.c: initialize detach var

Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string.  If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL.  Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string.  This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was  mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen

* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
  preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
  tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
  -domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
  -boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params

This was prevent virDomainSave from working properly by default,
which is a bad thing.
Signed-off-by: NChris Lalancette <clalance@redhat.com>

Signed-off-by: NChris Lalancette <clalance@redhat.com>

* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
  to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
  libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
  uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
  and the qemu/*.aug files. Add test case for QEMU augeas files.
  Add uninstall-local rule for files/directories created during
  install. Rename install-exec-local to install-data-local.
  Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move

* src/Makefile.am, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c,
  tests/seclabeltest.c: Adapt for changed paths
* src/security.c: Rename to src/security/security_driver.c
* src/security.h: Rename to src/security/security_driver.h
* src/security_selinux.c, src/security_selinux.h: Move to src/security/

* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths