Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

libvirt.org/search.php drops into some kind of screen which I guess
is supposed to show a search bar with options, but presently for me
renders as nothing but the following text:

Search the documentation on Libvirt.org

The search service indexes the libvirt APIs and documentation as well as the libvir-list@redhat.com mailing-list archives. To use it simply provide a set of keywords:

The main page search bar now redirects to google, this page is broken,
I say we just remove it and move on.
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Now that they are not linked any more remove them.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

The website does not look good in a mobile device as the text is
far too small and the layout assumes a wide screen.

Make the style dynamically adapt based on viewport size, so a
mobile device gets a layout more suited to its dimensions,
also changing "Learn" to "Docs"
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Commit id '94d2d642' caused a syntax-error check to fail:

docs/Makefile.am:276:	$(AM_V_GEN)sed -e '/<span id="php_placeholder"><\/span>/r '"$(srcdir)/$@.code.in" \
maint.mk: Wrap long lines in Makefiles
cfg.mk:721: recipe for target 'sc_prohibit_long_lines' failed
make: *** [sc_prohibit_long_lines] Error 1
make: *** Waiting for unfinished jobs....

Altered the line to put another line wrap between sed and -e

We already require libxml to be installed, so it is not unreasonable
to require xmllint and xsltproc to be installed too - any platform
with the former will have the latter too.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The HTML pages are currently validated against an XHTML 1.0 DTD.
This makes it impossible to take advantage of features that are
introduced in HTML 5, because they'll fail validation.

There is intentionally no DTD defined for HTML 5, so there's no
alternative to XHTML 1.0 DTD that we could switch to. The only
options are to stick with XHTML 1.0 forever, or drop the DTD
validation, and we pick the latter.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

I just forgot '-u' in a54c9622.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

In order not to make the build even less reproducible, honour
SOURCE_DATE_EPOCH environment variable as specified:

  https://reproducible-builds.org/specs/source-date-epoch/Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Despite being a generated file, HACKING has been tracked in
the git repository along with actual source files. As far as
I'm aware, it's the only generated file for which that happens.

Times and times again, people[1] have committed changes to
the source file without refreshing the generated copy at the
same time.

The rationale for tracking the generated file is to help out
people who just cloned the git repository looking to contribue;
however, README-hacking already contains enough information to
get perspective contributors to a place where they can simply
look at docs/hacking.html instead.

[1] Mostly me, to be honest
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>

Currently, building the NEWS file involves using a XSLT stylesheet
to extract information from the same HTML file that's used on the
libvirt website.

The process works, but it's quite fiddly in that it requires the
source HTML to be formatted in a very precise way, and a single
missing newline can mess up the resulting plain text considerably.

Moreover, the XSLT stylesheet itself encodes a lot of the details
of converting to plain text in a way that's not necessarily easy
to understand, tweak or fix.

To improve the process, move all existing entries to a new XML
file that contains exactly the information we care about in a
simple structured format, and start generating both the HTML and
plain text versions of the release notes using XSLT stylesheets
that can now afford to be almost trivial.

When changing one of the src/libvirt-*.c files to alter the docs, the
adjusted files weren't being built.  Added them into APIBUILD_STAMP and
then added that to the html/index.html rule which is used for the
$(apihtml_generated) generated rule.

Also, for clean we can remove the html/*.html files

Remove a bunch of pages which are either outdated, have no
content, or duplicate content better described elsewhere
in the site or wiki.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A combination of the index page, top nav bar and docs.html page
provide links to all pages on the site. The left hand nav bar
is thus redundant and can be removed to provide a simpler style
for the site.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The todo page used to be auto-generated from bugzilla but is
no longer used.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace the old "Made with libvirt" logo with links to the
new "Libvirt powered" logos, providing various sizes.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use a large logo banner across the front page. Tile the
three lists of links into three panels
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Use a dark banner whose color matches the dark green used in
the logo. Introduce a newly rendered version of the header
logo derived from new SVG file, instead of old one from
(now lost) Adobe Illustrator file.

The top banner logo now links to the front page as is common
practice for most websites.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add the SVG files for the libvirt logo, along with corresponding
pre-rendered PNG bitmaps at key sizes. Also add a README file
describing how to modify the logos and their intended usages.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This file requires three steps instead of two.
Move it earlier in the list of targets to avoid waiting for it.

Remove DOC_SOURCE_DIR, introduced by and
unused since commit b325d741.

PERL is already detected in configure.ac.

So, I've ran into very interesting problem lately. When doing the
following, I've encountered an error:

  libvirt.git $ make dist && tar -xJf libvirt-2.2.0.tar.xz && \
                cd libvirt-2.2.0 && ./configure && \
                rm docs/formatdomain.html && make -C docs

  make: Entering directory 'docs'
  make: *** No rule to make target 'formatdomain.html', needed by 'web'.  Stop.
  make: Leaving directory 'docs'

I had no idea what was going on, so I've nailed down the commit
that "broke it" via running git-bisect. It was this one:
7659bd92. But that shed no more light until I realized
that the commit might actually just exposed a problem we had. And
guess what - I've nailed it down. Of course we are not
distributing subsite.xsl that's why make prints error message.
Very misleading one I must say.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since commit d195cffa, both $(srcdir) and $(abs_builddir)
are passed to the apibuild.py script; however, since the
former is a relative path and the latter an absolute one, the
script might not be able to detect whether they point to the
same location.

Pass both as relative paths to avoid the issue.

libvirt-common.h is generated into builddir/include/libvirt. apibuild.py
only operated on srcdir/inlcude/libvirt. With VPATH build
srcdir/docs/libvirt-libvirt-common.html would not get generated and make
RPM failed.

Since commit f5d9c5d0 moved the virTypedParam stuff into
libvirt-common we did not generate any docs for them and neither did we
populate them into libvirt-api.xml. This broke the sanity check in
libvirt python. Fix it by generating docs for libvirt-common.h too.

Our uninstall script is not exact counterpart of install one.
Therefore we are leaving couple of files behind. This should not
happen.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

While we could leave it behind as an indelible sign that libvirt
has been running on host, other users might not be that fond of
it.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This is long since obsolete, just scrap it all

Imagine you have partially installed libvirt, or maybe you're
just running 'make uninstall' from a different version than 'make
install' has been ran. One way or another, we are doing plain
'rm' instead of 'rm -f' and thus not trying hard enough when
uninstalling. In the rest of our code we stick with -f switch. Do
that for docs too.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When generating docs in a VPATH build we get a failure to
create a file due to the 'internals' subdir not existing:

  Generating internals/locking.html.tmp
  /bin/sh: line 3: internals/locking.html.tmp: No such file or directory
  rm: cannot remove ‘internals/locking.html.tmp’: No such file or directory
  Makefile:2229: recipe for target 'internals/locking.html.tmp' failed
  make: *** [internals/locking.html.tmp] Error 1

For some reason, make has decided to run the target

  %.html.tmp: %.html.in site.xsl page.xsl sitemap.html.in $(acl_generated)

instead of the target

  internals/%.html.tmp: internals/%.html.in subsite.xsl page.xsl sitemap.html.in

Removing '$(acl_generated)' from the first target, inexplicably
causes make to now run the correct target for the internals/
files.

Rather than figure this out, lets just combine the two targets
into one.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

So after da176bf6 and friend we have switched to $(wildcard
some/path/*.xml) instead of enumerating the files explicitly.
This is nice, however it makes distcheck build from VPATH fail.
The reason is that it's is not obvious to what does the wildcard
refer to: srcdir or builddir?
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Move the logic to docs/Makefile.am, and simplify it with a wildcard
expression.

As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.

This reverts commit e5470dd0.

This has been ACK'd by the original author in the original mail thread:
https://www.redhat.com/archives/libvir-list/2015-September/msg00310.html

The reason to revert this is due to the patch breaking the generation of
internal subsites.  The original issue still needs to be dealt with,
though.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Double semicolons have special meaning in makefiles, but they would have
to be combined with other rules witch such separators in order to be
used as intended.  Since there are no other rules like that, let's
clean it up.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>