Run this command:
  git grep -l VIR_DEBUG|xargs perl -pi -e \
    's/(VIR_DEBUG0?)\s*\(_\((".*?")\)/$1($2/'

These changes avoid false-positive syntax-check failure,
and also make the resulting diagnostics more comprehensible.

Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

Run this:
  git grep -l 'VIR_ERROR0\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR0)\s*\((".*?")\)/$1(_($2))/'

Change VIR_ERROR("%s", "..."
to     VIR_ERROR0("..."

and

Change VIR_ERROR("%s", _("...")
to     VIR_ERROR0(_("...")

Use this command:
  git grep -E -l 'VIR_ERROR\("%s", (_\()?"'|xargs perl -pi -e \
  's/VIR_ERROR\("%s", (_\()?"/VIR_ERROR0($1"/'

* src/qemu/qemu_conf.c (qemudParseHelpStr): Fix errors that made
it impossible to diagnose invalid minor and micro version number
components.
Signed-off-by: NChris Wright <chrisw@redhat.com>

The current cleanup: in StartVMDaemon path is a poor duplication.
qemuShutdownVMDaemon can handle teardown for inactive VMs, so let's use it.

v2: Remove old abort: label, only use cleanup:

* src/qemu/qemu_conf.c (QEMU_VERSION_STR_1, QEMU_VERSION_STR_2):
Define these instead of...
(QEMU_VERSION_STR): ... this.  Remove definition.
(qemudParseHelpStr): Check first for the new, shorter prefix,
"QEMU emulator version", and then for the old one,
"QEMU PC emulator version" when trying to parse the version number.
Based on a patch by Chris Wright.

Clients that require this already seem to do so. Calling this function
with pid < 1 also should not cause problems.

This only exists for a certain cleanup path in StartVMDaemon, but is
unneeded since domain_conf.c handles this for us automatically.

Everything after hostdev setup needs to jump to cleanup on error.

There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Don't ignore
virDomainSaveStatus failure.
* src/conf/domain_conf.h (virDomainSaveStatus): Use
ATTRIBUTE_RETURN_CHECK, so this doesn't happen again.

Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer.  Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.

* src/qemu/qemu_driver.c (qemuTeardownDiskCgroup): Remove
bogus empty-body while-loop.
(qemuSetupDiskCgroup): Likewise.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

There were three very similar uses of qemuMonitorAddDrive.
This change makes the three 17-line sequences identical.
* src/qemu/qemu_driver.c (qemudDomainAttachPciDiskDevice): Detect
failure.  Add VIR_WARN and braces.
(qemudDomainAttachSCSIDisk): Add VIR_WARN and braces.
(qemudDomainAttachUsbMassstorageDevice): Likewise.

* src/qemu/qemu_driver.c (qemudDomainRestore): Don't ignore
virDomainSaveStatus failure.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrate): Also
free "safedest" buffer when failing.

History has shown that there are frequent bugs in the QEMU driver
code leading to the monitor being invoked with a NULL pointer.
Although the QEMU driver code should always report an error in
this case before invoking the monitor, as a safety net put in a
generic check in the monitor code entry points.

* src/qemu/qemu_monitor.c: Safety net to check for NULL monitor
  object

Any method which intends to invoke a monitor command must have
a check for virDomainObjIsActive() before using the monitor to
ensure that priv->mon != NULL.

There is one subtle edge case in this though. If a method invokes
multiple monitor commands, and calls qemuDomainObjExitMonitor()
in between two of these commands then there is no guarentee that
priv->mon != NULL anymore. This is because the QEMU process may
exit or die at any time, and because qemuDomainObjEnterMonitor()
releases the lock on virDomainObj, it is possible for the background
thread to close the monitor handle and thus qemuDomainObjExitMonitor
will release the last reference allowing priv->mon to become NULL.

This affects several methods, most notably migration but also some
hotplug methods. This patch takes a variety of approaches to solve
the problem, depending on the particular usage scenario. Generally
though it suffices to add an extra virDomainObjIsActive() check
if qemuDomainObjExitMonitor() was called during the method.

* src/qemu/qemu_driver.c: Fix multiple potential NULL pointer flaws
  in usage of the monitor

* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Upon look-up failure,
i.e., vm==NULL, goto cleanup, rather than to "endjob", superficially
since the latter would dereference vm, but more fundamentally because
we certainly don't want to call qemuDomainObjEndJob before we've
even attempted qemuDomainObjBeginJob.

(gdb) p/x QEMUD_CMD_FLAG_VNET_HOST
$7 = 0xffffffff80000000

Oops - that meant we were incorrectly setting QEMU_CMD_FLAG_RTC_TD_HACK
for qemu-kvm-0.12.3 (and probably botching a few other settings as well).

Fixes Red Hat BZ#592070

* src/qemu/qemu_conf.h (QEMUD_CMD_FLAG_VNET_HOST): Avoid sign
extension.
* tests/qemuhelpdata/qemu-kvm-0.12.3: New file.
* tests/qemuhelptest.c (mymain): Add another case.

A fedora translator filed:

https://bugzilla.redhat.com/show_bug.cgi?id=580816

Pointing out these two error messages as unclear: "write save" sounds
like a typo without context, and lack of a colon made the second message
difficult to parse.

virFileResolveLink was returning a positive value on error,
thus confusing callers that assumed failure was < 0.  The
confusion is further evidenced by callers that would have
ended up calling virReportSystemError with a negative value
instead of a valid errno.

Fixes Red Hat BZ #591363.

* src/util/util.c (virFileResolveLink): Live up to documentation.
* src/qemu/qemu_security_dac.c
(qemuSecurityDACRestoreSecurityFileLabel): Adjust callers.
* src/security/security_selinux.c
(SELinuxRestoreSecurityFileLabel): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.

qemuReadLogOutput early VM death detection is racy and won't always work.
Startup then errors when connecting to the VM monitor. This won't report
the emulator cmdline output which is typically the most useful diagnostic.

Check if the VM has died at the very end of the monitor connection step,
and if so, report the cmdline output.

See also: https://bugzilla.redhat.com/show_bug.cgi?id=581381

* src/qemu/qemu_driver.c (qemudDomainStart): After setting vm to NULL,
goto cleanup, rather than dereferencing the NULL pointer.

* src/qemu/qemu_driver.c: Remove debugging fprintf() calls
  accidentally left in code

* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Avoid NULL-deref
upon unknown UUID.  Call qemuDomainObjBeginJob(vm) only after
ensuring that vm != NULL, not before.  This potential NULL-deref
was introduced by commit 2c555d87.

This adds a missing driver lock in the qemu driver to protect
the list of domains.

The code specifies driver->cacheDir as the format string,
but it usually doesn't contain '%s', so the subsequent
argument, "/qemu.mem.XXXXXX", is always ignored.

The patch fixes the misuse.

Setting dynamic_ownership=0 in /etc/libvirt/qemu.conf prevents
libvirt's DAC security driver from setting uid/gid on disk
files when starting/stopping QEMU, allowing the admin to manage
this manually. As a side effect it also stopped setting of
uid/gid when saving guests to a file, which completely breaks
save when QEMU is running non-root. Thus saved state labelling
code must ignore the dynamic_ownership parameter

* src/qemu/qemu_security_dac.c: Ignore dynamic_ownership=0 when
  doing save/restore image labelling

When QEMU runs with its disk on NFS, and as a non-root user, the
disk is chownd to that non-root user. When migration completes
the last step is shutting down the QEMU on the source host. THis
normally resets user/group/security label. This is bad when the
VM was just migrated because the file is still in use on the dest
host. It is thus neccessary to skip the reset step for any files
found to be on a shared filesystem

* src/libvirt_private.syms: Export virStorageFileIsSharedFS
* src/util/storage_file.c, src/util/storage_file.h: Add a new
  method virStorageFileIsSharedFS() to determine if a file is
  on a shared filesystem (NFS, GFS, OCFS2, etc)
* src/qemu/qemu_driver.c: Tell security driver not to reset
  disk labels on migration completion
* src/qemu/qemu_security_dac.c, src/qemu/qemu_security_stacked.c,
  src/security/security_selinux.c, src/security/security_driver.h,
  src/security/security_apparmor.c: Add ability to skip disk
  restore step for files on shared filesystems.

The cgroups ACL code was only allowing the primary disk image.
It is possible to chain images together, so we need to search
for backing stores and add them to the ACL too. Since the ACL
only handles block devices, we ignore the EINVAL we get from
plain files. In addition it was missing code to teardown the
cgroup when hot-unplugging a disk

* src/qemu/qemu_driver.c: Allow backing stores in cgroup ACLs
  and add missing teardown code in unplug path

QEMU is gaining a new monitor command netdev_add for hotplugging
NICs using the netdev backend code. We already support this on
the command this, though it is disabled. This adds support for
hotplug too, also to remain disabled until 0.13 QEMU is released

* src/qemu/qemu_driver.c: Support netdev hotplug for NICs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for netdev_add and netdev_remove commands

When closing a monitor using qemuMonitorClose(), we are aware of
the possibility the monitor is still being used somewhere:

    /* NB: ordinarily one might immediately set mon->watch to -1
     * and mon->fd to -1, but there may be a callback active
     * that is still relying on these fields being valid. So
     * we merely close them, but not clear their values and
     * use this explicit 'closed' flag to track this state */

but since we call virEventAddHandle() on that monitor without increasing
its ref counter, the monitor is still freed which makes possible users
of it quite unhappy. The unhappiness can lead to a hang if qemuMonitorIO
tries to lock mutex which no longer exists.

With the introduction of the generic qemu device model, unplugging
SCSI disks works like a charm, so support it in libvirt.

* src/qemu/qemu_driver.c: Add qemudDomainDetachSCSIDiskDevice() to do the
  unplugging, extend qemudDomainDetachDeviceAdd().
Signed-off-by: NWolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

* src/qemu/qemu_driver.c (qemudFindDisk): Mark parameter const.
(qemudShrinkDisks): Mark parameter unsigned.