Run this command:
  git grep -l VIR_DEBUG|xargs perl -pi -e \
    's/(VIR_DEBUG0?)\s*\(_\((".*?")\)/$1($2/'

These changes avoid false-positive syntax-check failure,
and also make the resulting diagnostics more comprehensible.

Handle concatenated strings manually.

Run this:
  git grep -l 'VIR_ERROR\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR)\s*\((".*?"),/$1(_($2),/'

Run this:
  git grep -l 'VIR_ERROR0\s*("'|xargs perl -pi -e \
    's/(VIR_ERROR0)\s*\((".*?")\)/$1(_($2))/'

Change VIR_ERROR("%s", "..."
to     VIR_ERROR0("..."

and

Change VIR_ERROR("%s", _("...")
to     VIR_ERROR0(_("...")

Use this command:
  git grep -E -l 'VIR_ERROR\("%s", (_\()?"'|xargs perl -pi -e \
  's/VIR_ERROR\("%s", (_\()?"/VIR_ERROR0($1"/'

* src/qemu/qemu_conf.c (qemudParseHelpStr): Fix errors that made
it impossible to diagnose invalid minor and micro version number
components.
Signed-off-by: NChris Wright <chrisw@redhat.com>

The current cleanup: in StartVMDaemon path is a poor duplication.
qemuShutdownVMDaemon can handle teardown for inactive VMs, so let's use it.

v2: Remove old abort: label, only use cleanup:

* src/qemu/qemu_conf.c (QEMU_VERSION_STR_1, QEMU_VERSION_STR_2):
Define these instead of...
(QEMU_VERSION_STR): ... this.  Remove definition.
(qemudParseHelpStr): Check first for the new, shorter prefix,
"QEMU emulator version", and then for the old one,
"QEMU PC emulator version" when trying to parse the version number.
Based on a patch by Chris Wright.

* src/lxc/lxc_controller.c (ignorable_epoll_accept_errno): New function.
(lxcControllerMain): Handle a failed accept carefully:
most errno values indicate legitimate failure and must be fatal.
However, ignore a special case: that in which an incoming client quits
between the poll() indicating its presence, and our accept() which
is trying to process it.

Clients that require this already seem to do so. Calling this function
with pid < 1 also should not cause problems.

This only exists for a certain cleanup path in StartVMDaemon, but is
unneeded since domain_conf.c handles this for us automatically.

Everything after hostdev setup needs to jump to cleanup on error.

There doesn't seem to be anything specific to tap devices for this
array of file descriptors which need to stay open of the guest to use.
Rename then for others to make use of.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NChris Lalancette <clalance@redhat.com>

* src/xen/xend_internal.c (xenDaemonDomainDefineXML): Remove \n.
* src/network/bridge_driver.c (networkAddMasqueradingIptablesRules):
Likewise.

* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Don't ignore
virDomainSaveStatus failure.
* src/conf/domain_conf.h (virDomainSaveStatus): Use
ATTRIBUTE_RETURN_CHECK, so this doesn't happen again.

These files may be useful for anyone making modifications to
source files in a tarball distribution.

* src/Makefile.am (EXTRA_DIST): Add THREADS.txt.
* daemon/Makefile.am (EXTRA_DIST): Add THREADING.txt.

This will be used in the ESX storage driver in order to handle
the DatastoreInfo type and inheriting types properly.

This semantic will be used in the ESX storage driver.

This test was failing on systems using pdwtags from dwarves-1.3.
Reported by Matthias Bolte.
Two-pronged fix:
  - use --verbose to work also with dwarves-1.3; adapt regular
    expressions to handle now-varying separators
  - require a minimum number of post-split clauses, in order to
    skip upon any future format change.
    Currently there are 318; if there are 300 or fewer,
    give a warning similar to when pdwtags is missing.
* src/Makefile.am (remote_protocol-structs): Use pdwtags' --verbose
option to make 1.3 emit member sizes and offsets.
Consistently output WARNING messages to stderr.

Do not require each caller of virStorageFileGetMetadata and
virStorageFileGetMetadataFromFD to first clear the storage of the
"meta" buffer.  Instead, initialize that storage in
virStorageFileGetMetadataFromFD.
* src/util/storage_file.c (virStorageFileGetMetadataFromFD): Clear
"meta" here, not before each of the following callers.
* src/qemu/qemu_driver.c (qemuSetupDiskCgroup): Don't clear "meta" here.
(qemuTeardownDiskCgroup): Likewise.
* src/qemu/qemu_security_dac.c (qemuSecurityDACSetSecurityImageLabel):
Likewise.
* src/security/security_selinux.c (SELinuxSetSecurityImageLabel):
Likewise.
* src/security/virt-aa-helper.c (get_files): Likewise.

* src/qemu/qemu_driver.c (qemuTeardownDiskCgroup): Remove
bogus empty-body while-loop.
(qemuSetupDiskCgroup): Likewise.

* po/POTFILES.in: Remove src/util/logging.c and src/util/uuid.c.
* src/phyp/phyp_driver.c (phypUUIDTable_ReadFile): Correct more
VIR_WARN uses, now manually.
(phypUUIDTable_Init, phypUUIDTable_Pull): Likewise.

Run this command:
  git grep -l 'VIR_WARN("%s", "'|xargs perl -pi -e \
    's/VIR_WARN\("%s", "/VIR_WARN0("/'
* src/phyp/phyp_driver.c (phypDomainGetInfo): Perform the above.
(phypDomainCreateAndStart, phypUUIDTable_ReadFile): Likewise.

* src/util/uuid.c (virUUIDGenerate): Remove _(...) manually.

Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'

There were three very similar uses of qemuMonitorAddDrive.
This change makes the three 17-line sequences identical.
* src/qemu/qemu_driver.c (qemudDomainAttachPciDiskDevice): Detect
failure.  Add VIR_WARN and braces.
(qemudDomainAttachSCSIDisk): Add VIR_WARN and braces.
(qemudDomainAttachUsbMassstorageDevice): Likewise.

* src/util/ebtables.c (ebtablesAddRemoveRule): Don't skip
va_end(args) on an error path.
* src/util/iptables.c (iptablesAddRemoveRule): Identical change.

* src/qemu/qemu_driver.c (qemudDomainRestore): Don't ignore
virDomainSaveStatus failure.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrate): Also
free "safedest" buffer when failing.

* src/conf/nwfilter_conf.c (virNWFilterDefParseXML): Also free "ret"
via cleanup.

* src/conf/domain_conf.c (virDomainNetDefParseXML): Don't leak
memory when parsing two or more "filterref" elements.

* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesWriteToTempFile):
Skip the close if "fd" is negative.

History has shown that there are frequent bugs in the QEMU driver
code leading to the monitor being invoked with a NULL pointer.
Although the QEMU driver code should always report an error in
this case before invoking the monitor, as a safety net put in a
generic check in the monitor code entry points.

* src/qemu/qemu_monitor.c: Safety net to check for NULL monitor
  object

Any method which intends to invoke a monitor command must have
a check for virDomainObjIsActive() before using the monitor to
ensure that priv->mon != NULL.

There is one subtle edge case in this though. If a method invokes
multiple monitor commands, and calls qemuDomainObjExitMonitor()
in between two of these commands then there is no guarentee that
priv->mon != NULL anymore. This is because the QEMU process may
exit or die at any time, and because qemuDomainObjEnterMonitor()
releases the lock on virDomainObj, it is possible for the background
thread to close the monitor handle and thus qemuDomainObjExitMonitor
will release the last reference allowing priv->mon to become NULL.

This affects several methods, most notably migration but also some
hotplug methods. This patch takes a variety of approaches to solve
the problem, depending on the particular usage scenario. Generally
though it suffices to add an extra virDomainObjIsActive() check
if qemuDomainObjExitMonitor() was called during the method.

* src/qemu/qemu_driver.c: Fix multiple potential NULL pointer flaws
  in usage of the monitor

* cfg.mk (useless_free_options): Add many vir*Free* function names,
and then remove the useless if-before-free tests exposed by running
make syntax-check.
* src/conf/interface_conf.c (virInterfaceDefFree): Remove useless "if".
(virInterfaceAssignDef): Likewise.
* src/conf/network_conf.c (virNetworkAssignDef): Likewise.
* src/conf/storage_conf.c (virStoragePoolObjAssignDef): Likewise.
* src/node_device/node_device_hal.c (dev_create): Likewise.
* src/security/virt-aa-helper.c (vahDeinit): Likewise.
* src/test/test_driver.c (testNodeDeviceCreateXML): Likewise.
* src/util/conf.c (virConfSetValue): Likewise.

* src/qemu/qemu_driver.c (qemudDomainSetVcpus): Upon look-up failure,
i.e., vm==NULL, goto cleanup, rather than to "endjob", superficially
since the latter would dereference vm, but more fundamentally because
we certainly don't want to call qemuDomainObjEndJob before we've
even attempted qemuDomainObjBeginJob.