If the libxl driver is compiled in, then everytime libvirtd
starts up on a non-Xen Dom0 host, it logs a error message.
Since this is an expected condition, we should not log at
'error' level, only 'info'.

* src/libxl/libxl_driver.c: Lower log level for certain
  expected errors during driver init

Undefining a running domain will convert it to trasient, but keep
the domain still running.

Transient domains reject attempts to set autostart, and using
virDomainCreate to restart a domain only works on persistent
domains.  Therefore, managed save makes no sense on transient
domains, and should be rejected up front rather than creating
an otherwise unrecoverable managed save file.

Besides, transient domains imply that a lot more management is
being done by the upper layer; this includes the assumption
that the upper layer is okay managing the saved state file
created by virDomainSave, and does not need to use managed save.

* src/libvirt.c: Document that transient domains are incompatible
with managed save.
* src/qemu/qemu_driver.c (qemuDomainManagedSave): Enforce it.
* src/libxl/libxl_driver.c (libxlDomainManagedSave): Likewise.

Now that virDomainSetVcpusFlags knows about VIR_DOMAIN_AFFECT_CURRENT,
so should virDomainGetVcpusFlags.

Unfortunately, the virsh counterpart 'virsh vcpucount' has already
commandeered --current for a different meaning, so teaching virsh
to expose this in the next patch will require a bit of care.

* src/libvirt.c (virDomainGetVcpusFlags): Allow
VIR_DOMAIN_AFFECT_CURRENT.
* src/libxl/libxl_driver.c (libxlDomainGetVcpusFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetVcpusFlags): Likewise.
* src/test/test_driver.c (testDomainGetVcpusFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetVcpusFlags): Likewise.

For all hypervisors that support save and restore, the new API
now performs the same functions as the old.

VBox is excluded from this list, because its existing domainsave
is broken (there is no corresponding domainrestore, and there
is no control over the filename used in the save).  A later
patch should change vbox to use its implementation for
managedsave, and teach start to use managedsave results.

* src/libxl/libxl_driver.c (libxlDomainSave): Move guts...
(libxlDomainSaveFlags): ...to new function.
(libxlDomainRestore): Move guts...
(libxlDomainRestoreFlags): ...to new function.
* src/test/test_driver.c (testDomainSave, testDomainSaveFlags)
(testDomainRestore, testDomainRestoreFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSave)
(xenUnifiedDomainSaveFlags, xenUnifiedDomainRestore)
(xenUnifiedDomainRestoreFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSave, qemudDomainRestore):
Rename and move guts.
(qemuDomainSave, qemuDomainSaveFlags, qemuDomainRestore)
(qemuDomainRestoreFlags): ...here.
(qemudDomainSaveFlag): Rename...
(qemuDomainSaveInternal): ...to this, and update callers.

In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.

* src/libxl/libxl_driver.c (libxlDomainUndefineFlags): Use correct
enum value.
* src/remote_protocol-structs (remote_procedure): Likewise.

* src/libxl/libxl_driver.c: New callback for libxl_driver,
new function libxlDomainUndefineFlags, and changes libxlDomainUndefine
as a wrapper of libxlDomainUndefineFlags.

The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated.  In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.

* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.

* src/libxl/libxl_driver.c (libxlOpen, libxlDomainReboot)
(libxlDomainXMLFromNative, libxlDomainXMLToNative)
(libxlDomainCreateWithFlags): Reject unknown flags.

The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.

Now that the public APIs always use unsigned flags, the internal
driver callbacks might as well do likewise.

* src/driver.h (vrDrvOpen, virDrvDomainCoreDump)
(virDrvDomainGetXMLDesc, virDrvNetworkGetXMLDesc)
(virDrvNWFilterGetXMLDesc): Update type.
* src/remote/remote_protocol.x (remote_open_args)
(remote_domain_core_dump_args, remote_domain_get_xml_desc_args)
(remote_network_get_xml_desc_args)
(remote_nwfilter_get_xml_desc_args): Likewise.
* src/test/test_driver.c: Update clients.
* src/remote/remote_driver.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xen_hypervisor.h: Likewise.
* src/xen/xen_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xend_internal.h: Likewise.
* src/xen/xm_internal.c: Likewise.
* src/xen/xm_internal.h: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xen/xs_internal.h: Likewise.
* src/xen/xen_inotify.c: Likewise.
* src/xen/xen_inotify.h: Likewise.
* src/phyp/phyp_driver.c: Likewise.
* src/openvz/openvz_driver.c: Likewise.
* src/vmware/vmware_driver.c: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_interface_driver.c: Likewise.
* src/esx/esx_network_driver.c: Likewise.
* src/esx/esx_storage_driver.c: Likewise.
* src/esx/esx_device_monitor.c: Likewise.
* src/esx/esx_secret_driver.c: Likewise.
* src/esx/esx_nwfilter_driver.c: Likewise.
* src/interface/netcf_driver.c: Likewise.
* src/nwfilter/nwfilter_driver.c: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/secret/secret_driver.c: Likewise.
* src/storage/storage_driver.c: Likewise.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/remote_protocol-structs: Likewise.

Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.

Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.

We already have a public virDomainPinVcpu, which implies that
Pin and Vcpu are treated as separate words.  Unreleased commit
e261987c introduced virDomainGetVcpupinInfo as the first public
API that used Vcpupin, although we had prior internal uses of
that spelling.  For consistency, change the spelling to be two
words everywhere, regardless of whether pin comes first or last.

* daemon/remote.c: Treat vcpu and pin as separate words.
* include/libvirt/libvirt.h.in: Likewise.
* src/conf/domain_conf.c: Likewise.
* src/conf/domain_conf.h: Likewise.
* src/driver.h: Likewise.
* src/libvirt.c: Likewise.
* src/libvirt_private.syms: Likewise.
* src/libvirt_public.syms: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.
* src/remote/remote_protocol.x: Likewise.
* src/remote_protocol-structs: Likewise.
Suggested by Matthias Bolte.

Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.

v2:
    Actually add APIs to libvirt.h

There were a few minor issues in commit 5b6c961e
- leak managed save path
- leak managed save fd
- functions that open an fd should also close it

Based on the equivalent qemu driver code

* src/libxl/libxl_driver.c: refactor the Start save and restore
  routines of the driver and adds the new entry points for
  managed saves handling

* src/libxl/libxl_driver.c: fix the libxlDomainGetInfo to return the
  maximum memory for running domain

Add support to set the maximum memory of the domain.
Also add support to change the memory of the current
state of the domain, which translates to a running
domain or the config of the domain.

Based on the code from the qemu driver.

v3:
* initialize xml pointer to avoid segfault
* throw error message if domain is paused as
  libxenlight itself will pause it

v2:
* header is now padded and has a version field
* the correct restore function from libxl is used
* only create the restore event once in libxlVmStart

v2:
* incorporated Jim Fehlig's review

This patch fixes the population of the
libxenlight data structures. Now the devices
should be removed correctly from the xenstore
if they are detached.

Well, the remaining drivers that already had the get/set
scheduler parameter functionality to begin with.

For now, this blindly treats VIR_DOMAIN_SCHEDINFO_CURRENT as
the only supported operation for these 5 domains; it will
take domain-specific patches if more specific behavior is
preferred.

* src/esx/esx_driver.c (esxDomainGetSchedulerParameters)
(esxDomainSetSchedulerParameters): Move guts...
(esxDomainGetSchedulerParametersFlags)
(esxDomainSetSchedulerParametersFlags): ...to new functions.
* src/libxl/libxl_driver.c (libxlDomainGetSchedulerParameters)
(libxlDomainSetSchedulerParameters)
(libxlDomainGetSchedulerParametersFlags)
(libxlDomainSetSchedulerParametersFlags): Likewise.
* src/lxc/lxc_driver.c (lxcGetSchedulerParameters)
(lxcSetSchedulerParameters, lxcGetSchedulerParametersFlags)
(lxcSetSchedulerParametersFlags): Likewise.
* src/test/test_driver.c (testDomainGetSchedulerParams)
(testDomainSetSchedulerParams, testDomainGetSchedulerParamsFlags)
(testDomainSetSchedulerParamsFlags): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetSchedulerParameters)
(xenUnifiedDomainSetSchedulerParameters)
(xenUnifiedDomainGetSchedulerParametersFlags)
(xenUnifiedDomainSetSchedulerParametersFlags): Likewise.

Rather mechanical in nature.

* src/driver.h: Use newer virTypedParameter API names.
* src/libvirt.c: Likewise.
* daemon/remote.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/xen/xen_driver.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xen_hypervisor.h: Likewise.
* src/xen/xend_internal.c: Likewise.
* tools/virsh.c: Likewise.

Based on the device attach/detach code from the QEMU driver,
but using the new functions to create the structures associated.
* src/libxl/libxl_driver.c: implements domainAttachDevice,
  domainAttachDeviceFlags, domainDetachDevice, domainDetachDeviceFlags
  and domainUpdateDeviceFlags

* src/libxl/libxl_driver.c: in libxlVmCleanup, free up the
  newDef definition if present overwise it would be leaked.

Clang couldn't quite see that the same condition of
(flags & VIR_DOMAIN_MEM_CONFIG) is used twice, such that
the second block is guaranteed that def was assigned in
the first block.

* src/libxl/libxl_driver.c (libxlDomainSetMemoryFlags): Add a hint
for clang.

Add invalid argument checks for params and nparams to the public API
and remove them from the drivers (e.g. xend).

Add subset handling to libxl and test drivers.

params and nparams are essential and cannot be NULL. Check this in
libvirt.c and remove redundant checks from the drivers (e.g. xend).

Instead of enforcing that nparams must point to exact same value as
returned by virDomainGetSchedulerType relax this to a lower bound
check. This is what some drivers (e.g. xen hypervisor and esx)
already did. Other drivers (e.g. xend) didn't check nparams at all
and assumed that there is enough space in params.

Unify the behavior in all drivers to a lower bound check and update
nparams to the number of valid values in params on success.

Some drivers assumed it can be NULL (e.g. qemu and lxc) and check it
before assigning to it, other drivers assumed it must be non-NULL
(e.g. test and esx) and just assigned to it.

Unify this to nparams being optional and document it.

Add many version number annotations to the internal driver
tables, to allow hvsupport.html to display more accurate
information

Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:

    qemudDomainResume, /* domainResume */
    qemudDomainShutdown, /* domainShutdown */
    NULL, /* domainReboot */
    qemudDomainDestroy, /* domainDestroy */

to

    .domainResume = qemudDomainResume,
    .domainShutdown = qemudDomainShutdown,
    .domainDestroy = qemudDomainDestroy,

And get rid of any existing C99 style initializersr which
set NULL, eg change

     .listPools          = vboxStorageListPools,
     .numOfDefinedPools  = NULL,
     .listDefinedPools   = NULL,
     .findPoolSources    = NULL,
     .poolLookupByName   = vboxStoragePoolLookupByName,

to

     .listPools          = vboxStorageListPools,
     .poolLookupByName   = vboxStoragePoolLookupByName,

Fix some driver names:

  s/virDrvCPUCompare/virDrvCompareCPU/
  s/virDrvCPUBaseline/virDrvBaselineCPU/
  s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
  s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
  s/virDrvSecretListSecrets/virDrvListSecrets/

And some driver struct field names:

  s/getFreeMemory/nodeGetFreeMemory/

Only in drivers which use virDomainObj, drivers that query hypervisor
for domain status need to be updated separately in case their hypervisor
supports this functionality.

The reason is also saved into domain state XML so if a domain is not
running (i.e., no state XML exists) the reason will be lost by libvirtd
restart. I think this is an acceptable limitation.

Reason is currently always set to 0 (i.e., *_UNKNOWN).

* src/libxl/libxl_driver.c (libxlDomainEventFlush, libxlShutdown)
(libxlStartup): Fix typos.