- 18 1月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
This stops libvirt from probing for a libvirtd on the ESX server and sets the base for the implementation of the secondary drivers.
-
- 15 1月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 09 1月, 2010 1 次提交
-
-
由 Matthias Bolte 提交于
-
- 23 12月, 2009 2 次提交
-
-
由 Matthias Bolte 提交于
All other stateful drivers are linked directly to libvirtd instead of libvirt.so. Link the secret driver to libvirtd too. * daemon/Makefile.am: link the secret driver to libvirtd * daemon/libvirtd.c: add #ifdef WITH_SECRETS blocks * src/Makefile.am: don't link the secret driver to libvirt.so * src/libvirt_private.syms: remove the secretRegister symbol
-
由 Jiri Denemark 提交于
* src/Makefile.am src/cpu/cpu_map.c: rename in Makefile and in the cpu map loading code
-
- 22 12月, 2009 1 次提交
-
-
由 Jiri Denemark 提交于
* src/Makefile.am: install it in $(pkgdatadir) i.e. /usr/share/libvirt/ usually
-
- 18 12月, 2009 3 次提交
-
-
由 Jiri Denemark 提交于
* src/cpu/cpu_map.xml: newdescription file * src/Makefile.am: include it in dist
-
由 Jiri Denemark 提交于
Each driver supporting CPU selection must fill in host CPU capabilities. When filling them, drivers for hypervisors running on the same node as libvirtd can use cpuNodeData() to obtain raw CPU data. Other drivers, such as VMware, need to implement their own way of getting such data. Raw data can be decoded into virCPUDefPtr using cpuDecode() function. When implementing virConnectCompareCPU(), a hypervisor driver can just call cpuCompareXML() function with host CPU capabilities. For each guest for which a driver supports selecting CPU models, it must set the appropriate feature in guest's capabilities: virCapabilitiesAddGuestFeature(guest, "cpuselection", 1, 0) Actions needed when a domain is being created depend on whether the hypervisor understands raw CPU data (currently CPUID for i686, x86_64 architectures) or symbolic names has to be used. Typical use by hypervisors which prefer CPUID (such as VMware and Xen): - convert guest CPU configuration from domain's XML into a set of raw data structures each representing one of the feature policies: cpuEncode(conn, architecture, guest_cpu_config, &forced_data, &required_data, &optional_data, &disabled_data, &forbidden_data) - create a mask or whatever the hypervisor expects to see and pass it to the hypervisor Typical use by hypervisors with symbolic model names (such as QEMU): - get raw CPU data for a computed guest CPU: cpuGuestData(conn, host_cpu, guest_cpu_config, &data) - decode raw data into virCPUDefPtr with a possible restriction on allowed model names: cpuDecode(conn, guest, data, n_allowed_models, allowed_models) - pass guest->model and guest->features to the hypervisor * src/cpu/cpu.c src/cpu/cpu.h src/cpu/cpu_generic.c src/cpu/cpu_generic.h src/cpu/cpu_map.c src/cpu/cpu_map.h src/cpu/cpu_x86.c src/cpu/cpu_x86.h src/cpu/cpu_x86_data.h * configure.in: check for CPUID instruction * src/Makefile.am: glue the new files in * src/libvirt_private.syms: add new private symbols * po/POTFILES.in: add new cpu files containing translatable strings
-
由 Jiri Denemark 提交于
* include/libvirt/virterror.h src/util/virterror.c: add new domain VIR_FROM_CPU for errors * src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module * src/Makefile.am proxy/Makefile.am: include new files * src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference new code * src/libvirt_private.syms: private export of new entry points
-
- 10 12月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Long ago we tried to use Fedora's lokkit utility in order to register our iptables rules so that 'service iptables restart' would automatically load our rules. There was one fatal flaw - if the user had configured iptables without lokkit, then we would clobber that configuration by running lokkit. We quickly disabled lokkit support, but never removed it. Let's do that now. The 'my virtual network stops working when I restart iptables' still remains. For all the background on this saga, see: https://bugzilla.redhat.com/227011 * src/util/iptables.c: remove lokkit support * configure.in: remove --enable-lokkit * libvirt.spec.in: remove the dirs used only for saving rules for lokkit * src/Makefile.am: ditto * src/libvirt_private.syms, src/network/bridge_driver.c, src/util/iptables.h: remove references to iptablesSaveRules
-
- 08 12月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Initial support for the new QEMU monitor protocol using JSON as the data encoding format instead of plain text * po/POTFILES.in: Add src/qemu/qemu_monitor_json.c * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP mode. Replace with a version number check on >= 0.12 later * src/qemu/qemu_monitor.c: Delegate to json monitor if enabled * src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add impl of QMP protocol * src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
-
- 07 12月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
This introduces simple API for handling JSON data. There is an internal data structure 'virJSONValuePtr' which stores a arbitrary nested JSON value (number, string, array, object, nul, etc). There are APIs for constructing/querying objects and APIs for parsing/formatting string formatted JSON data. This uses the YAJL library for parsing/formatting from http://lloyd.github.com/yajl/ * src/util/json.h, src/util/json.c: Data structures and APIs for representing JSON data, and parsing/formatting it * configure.in: Add check for yajl library * libvirt.spec.in: Add build requires for yajl * src/Makefile.am: Add json.c/h * src/libvirt_private.syms: Export JSON symbols to drivers
-
- 04 12月, 2009 1 次提交
-
-
由 Pritesh Kothari 提交于
Also fixed serial port configuration which was broken due to recent change in virDomainChrDef where targetType was newly added. * src/Makefile.am: add new files * src/vbox/vbox_driver.c: add case for version 3.1 * src/vbox/vbox_tmpl.c: refactor common patterns into macros, support for version 3.1, serial port configuration fix * src/vbox/vbox_CAPI_v3_1.h, src/vbox/vbox_V3_1.c: generated code
-
- 23 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
* src/Makefile.am: Add processinfo.h/processinfo.c * src/util/processinfo.c, src/util/processinfo.h: Module providing APIs for getting/setting process CPU affinity * src/qemu/qemu_driver.c: Switch over to new APIs for schedular affinity * src/libvirt_private.syms: Export virProcessInfoSetAffinity and virProcessInfoGetAffinity to internal drivers
-
- 21 11月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
0.7.3 was broken * configure.in docs/news.html.in: release of 0.7.4 * configure.in libvirt.spec.in: require netcf >= 0.1.4 * src/Makefile.am: node_device/node_device_udev.h was missing from NODE_DEVICE_DRIVER_UDEV_SOURCES breaking compilation on platforms with udev
-
- 13 11月, 2009 3 次提交
-
-
由 David Allan 提交于
uses libpciaccess to provide human readable names for PCI vendor and device IDs * configure.in: add a requirement for libpciaccess >= 0.10.0 * src/Makefile.am: add the associated compilation flags and link * src/node_device/node_device_udev.c: lookup the libpciaccess for vendor name and product name based on their ids
-
由 David Allan 提交于
* configure.in src/Makefile.am: remove the configuration check and build instructions * src/node_device/node_device_devkit.c: removed the module * src/node_device/node_device_driver.c src/node_device/node_device_driver.h: removed references to the old backend
-
由 David Allan 提交于
* configure.in: add new --with-udev, disabled by default, and requiring libudev > 145 * src/node_device/node_device_udev.c src/node_device/node_device_udev.h: the new node device backend * src/node_device/node_device_linux_sysfs.c: moved node_device_hal_linux.c to a better file name * src/conf/node_device_conf.c src/conf/node_device_conf.h: add a couple of fields in node device definitions, and an API to look them up, remove a couple of unused fields from previous patch. * src/node_device/node_device_driver.c src/node_device/node_device_driver.h: plug the new driver * po/POTFILES.in src/Makefile.am src/libvirt_private.syms: add the new files and symbols * src/util/util.h src/util/util.c: add a new convenience macro virBuildPath and virBuildPathInternal() function
-
- 10 11月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
The qemu_driver.c code should not contain any code that interacts with the QEMU monitor at a low level. A previous commit moved all the command invocations out. This change moves out the code which actually opens the monitor device. * src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called from it. * src/Makefile.am: Add qemu_monitor.{c,h} * src/qemu/qemu_monitor.h: Add qemuMonitorOpen() * src/qemu/qemu_monitor.c: All code for opening the monitor
-
- 04 11月, 2009 2 次提交
-
-
由 Gerhard Stenzel 提交于
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is a new config type option for mac filtering * src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points * src/qemu/qemu_driver.c: plug the MAC filtering at the right places in the domain life cycle * src/Makefile.am po/POTFILES.in: add the new module
-
由 Gerhard Stenzel 提交于
* configure.in: look for ebtables binary location if present * src/Makefile.am: add the new module * src/util/ebtables.[ch]: new module and internal APIs around the ebtables binary * src/libvirt_private.syms: export the symbols only internally
-
- 30 10月, 2009 1 次提交
-
-
由 Daniel Veillard 提交于
* src/util/network.h src/util/network.c: utilities to parse network addresses, check netmask and compute ranges
-
- 21 10月, 2009 1 次提交
-
-
由 Jim Fehlig 提交于
* src/Makefile.am: add selinux CFLAGS and linker flags to security driver
-
- 09 10月, 2009 1 次提交
-
-
由 Amy Griffis 提交于
* src/lxc/libvirtd_lxc.aug src/lxc/test_libvirtd_lxc.aug: augeas schemas for lxc.conf * src/Makefile.am libvirt.spec.in: glue the new augeas files in
-
- 08 10月, 2009 2 次提交
-
-
由 Amy Griffis 提交于
* src/lxc/lxc.conf: new configuration file, there is currently one tunable "log_with_libvirtd" that controls whether an lxc controller will log only to the container log file, or whether it will honor libvirtd's log output configuration. This provides a way to have libvirtd and its children log to a single file. The default is to log to the container log file. * src/Makefile.am libvirt.spec.in: add the new file * src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value from the configuration file and pass the log informations when starting up a container.
-
由 Jamie Strandboge 提交于
* configure.in: look for AppArmor and devel * src/security/security_apparmor.[ch] src/security/security_driver.c src/Makefile.am: add and plug the new driver * src/security/virt-aa-helper.c: new binary which is used exclusively by the AppArmor security driver to manipulate AppArmor. * po/POTFILES.in: registers the new files * tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test: tests for virt-aa-helper and the security driver, secaatest.c is identical to seclabeltest.c except it initializes the 'apparmor' driver instead of 'selinux'
-
- 02 10月, 2009 1 次提交
-
-
由 Paolo Bonzini 提交于
Fix "make rpcgen", broken by the directory reorganization. * src/Makefile.am (rpcgen): Fix path to rpcgen_fix.pl.
-
- 30 9月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Rename virStorageVolFormatFileSystem to virStorageFileFormat and move to src/util/storage_file.[ch] * src/Makefile.am: add src/util/storage_file.[ch] * src/conf/storage_conf.[ch]: move enum from here ... * src/util/storage_file.[ch]: .. to here * src/libvirt_private.syms: update To/FromString exports * src/storage/storage_backend.c, src/storage/storage_backend_fs.c, src/vbox/vbox_tmpl.c: update for above changes
-
- 29 9月, 2009 1 次提交
-
-
由 Daniel P. Berrange 提交于
Pull out all the QEMU monitor interaction code to a separate file. This will make life easier when we need to drop in a new implementation for the forthcoming QMP machine friendly monitor support. Next step is to add formal APIs for each monitor command, and remove direct commands for sending/receiving generic data. * src/Makefile.am: Add qemu_monitor.c to build * src/qemu/qemu_driver.c: Remove code for monitor interaction * src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New file for monitor interaction * po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
-
- 21 9月, 2009 11 次提交
-
-
由 Daniel P. Berrange 提交于
When making changes to the remote protocol, src/ is always built first, so rpcgen should live there, to avoid having to run make in the 'daemon/' directory before building src/ * src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from remote client build * daemon/Makefile.am: Add -I../src/remote/ to libvirtd build and remove rpcgen rules * daemon/libvirtd.c: Adapt include of remote_driver.h taking into account new -I flag * daemon/remote_protocol.c, daemon/remote_protocol.h, daemon/remote_protocol.x: Move to src/remote/ * daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
-
由 Daniel P. Berrange 提交于
* src/bridge.c, src/bridge.h, src/buf.c, src/buf.h, src/cgroup.c, src/cgroup.h, src/conf.c, src/conf.h, src/event.c, src/event.h, src/hash.c, src/hash.h, src/hostusb.c, src/hostusb.h, src/iptables.c, src/iptables.h, src/logging.c, src/logging.h, src/memory.c, src/memory.h, src/pci.c, src/pci.h, src/qparams.c, src/qparams.h, src/stats_linux.c, src/stats_linux.h, src/threads-pthread.c, src/threads-pthread.h, src/threads-win32.c, src/threads-win32.h, src/threads.c, src/threads.h, src/util.c, src/util.h, src/uuid.c, src/uuid.h, src/virterror.c, src/virterror_internal.h, src/xml.c, src/xml.h: Move all files into src/util/ * daemon/Makefile.am: Add -Isrc/util/ to build flags * src/Makefile.am: Add -Isrc/util/ to build flags and update for moved files * src/libvirt_private.syms: Export cgroup APIs since they're now in util rather than linking directly to drivers * src/xen/xs_internal.c: Disable bogus virEventRemoveHandle call when built under PROXY * proxy/Makefile.am: Update for changed file locations. Remove bogus build of event.c * tools/Makefile.am, tests/Makefile.am: Add -Isrc/util/ to build flags
-
由 Daniel P. Berrange 提交于
* src/capabilities.c, src/capabilities.h, src/domain_conf.c, src/domain_conf.h, src/domain_event.c, src/domain_event.h, src/interface_conf.c, src/interface_conf.h, src/network_conf.c, src/network_conf.h, src/node_device_conf.c, src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h, src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c, src/storage_encryption_conf.h: Move to src/conf/ * src/Makefile.am: Add -Isrc/conf to the individual build targets which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS and SELINUX_CFLAGS from global INCLUDES and only have them in build targets which actually need them. Create a libvirt_conf.la convenience library for all config parsers * src/hostusb.h: Remove bogus include of domain_conf.h * tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src since it never has any generated header files * daemon/Makefile.am: Add -Isrc/conf * proxy/Makefile.am: Add -Isrc/conf and cope with renamed files * src/hash.c: Remove bogus include of libxml/threads.h
-
由 Daniel P. Berrange 提交于
* daemon/default-network.xml: Move to src/network/default.xml * daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move to src/qemu/ * src/qemu.conf: Move to src/qemu/qemu.conf * daemon/Makefile.am: Remove rules for default-nmetwork.xml and libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in uninstall-local that would install polkit again. * src/Makefile.am: Add rules for installing network/default.xml and the qemu/*.aug files. Add test case for QEMU augeas files. Add uninstall-local rule for files/directories created during install. Rename install-exec-local to install-data-local. Only install qemu.conf if WITH_QEMU is set. * tests/networkschematest: Update for XML location move
-
由 Daniel P. Berrange 提交于
Move the virsh tool and its man page into the tools directory * Makefile.am: Remove rules for virsh.1 man page * virsh.1: Remove auto-generated file * docs/Makefile.am: Remove rules for virsh.pod man page * docs/virsh.pod: Move to tools/ directory * src/Makefile.am, src/.gitignore: Remove rules for virsh * src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc, src/virsh.c: Move into tools/ directory * tools/Makefile.am: Add rules for building virsh * tools/.gitignore: Ignore virsh built files * tests/virshtest.c, tests/int-overflow: Update for new virsh location
-
由 Daniel P. Berrange 提交于
* src/Makefile.am, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c, tests/seclabeltest.c: Adapt for changed paths * src/security.c: Rename to src/security/security_driver.c * src/security.h: Rename to src/security/security_driver.h * src/security_selinux.c, src/security_selinux.h: Move to src/security/
-
由 Daniel P. Berrange 提交于
* daemon/qemud.c, src/Makefile.am: Adapt for changed paths * src/secret_driver.c, src/secret_driver.h: Move to src/secret/
-
由 Daniel P. Berrange 提交于
* daemon/qemud.c, src/Makefile.am: Adapt for changed paths * src/interface_driver.c: Rename to src/interface/netcf_driver.c * src/interface_driver.h: Rename to src/interface/netcf_driver.h
-
由 Daniel P. Berrange 提交于
* daemon/qemud.c, src/Makefile.am: Adapt for changed paths * src/network_driver.c: Rename to src/network/bridge_driver.c * src/network_driver.h: Rename to src/network/bridge_driver.h
-
由 Daniel P. Berrange 提交于
* daemon/mdns.c: Remove bogus include * daemon/qemud.c, src/Makefile.am, src/libvirt.c: Adapt for changed paths * src/remote_internal.c: Rename to src/remote/remote_driver.c * src/remote_internal.h: Rename to src/remote/remote_driver.h
-
由 Daniel P. Berrange 提交于
* src/Makefile.am, src/libvirt.c: Adjust for changed paths * src/test.c: Rename to src/test/test_driver.c, * src/test.h: Rename to src/test/test_driver.h
-