- 22 11月, 2013 6 次提交
-
-
由 Cole Robinson 提交于
Restarting an active libvirt-guests.service is the equivalent of doing: /usr/libexec/libvirt-guests.sh stop /usr/libexec/libvirt-guests.sh start Which in a default configuration will managedsave every running VM, and then restore them. Certainly not something we should do every time the libvirt-client RPM is updated. Just drop the try-restart attempt, I don't know what purpose it serves anyways. https://bugzilla.redhat.com/show_bug.cgi?id=962225
-
由 Jiri Denemark 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=1033614 As virt-login-shell is an SUID binary, we should restrict its usage to just the users chosen by an administrator to use virt-login-shell as their login shell. This can easily be done by making the binary executable only by users from a new virtlogin group.
-
由 Michal Privoznik 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=744967 If a domain is rebooting and a migrate API is called meanwhile we would have to transfer the fakeReboot attribute to the destination in order to prevent domain doing plain shutdown over there. We shouldn't try to do anything clever about it other than documenting this as a known limitation. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Martin Kletzander 提交于
Older xmllint version don't allow such characters in datatype anyURI. In order not to change too much, I'm suggesting making a choice of anyURI or 'absPathName' which should be fine (checked with upstream and that old xmllint, both work fine). Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>
-
由 Eric Blake 提交于
$ touch /var/lib/libvirt/images/'a<b>c' $ virsh pool-refresh default $ virsh vol-dumpxml 'a<b>c' default | head -n2 <volume> <name>a<b>c</name> Oops. That's not valid XML. And when we fix the XML generation, it fails RelaxNG validation. I'm also tired of seeing <key>(null)</key> in the example output for volume xml; while we used NULLSTR() to avoid a NULL deref rather than relying on glibc's printf extension behavior, it's even better if we avoid the issue in the first place. But this requires being careful that we don't invalidate any storage backends that were relying on key being unassigned during virStoragVolCreateXML[From]. I would have split this into two patches (one for escaping, one for avoiding <key>(null)</key>), but since they both end up touching a lot of the same test files, I ended up merging it into one. Note that this patch allows pretty much any volume name that can appear in a directory (excluding . and .. because those are special), but does nothing to change the current (unenforced) RelaxNG claim that pool names will consist only of letters, numbers, _, -, and +. Tightening the C code to match RelaxNG patterns and/or relaxing the grammar to match the C code for pool names is a task for another day (but remember, we DID recently tighten C code for domain names to exclude a leading '.'). * src/conf/storage_conf.c (virStoragePoolSourceFormat) (virStoragePoolDefFormat, virStorageVolTargetDefFormat) (virStorageVolDefFormat): Escape user-controlled strings. (virStorageVolDefParseXML): Parse key, for use in unit tests. * src/storage/storage_driver.c (storageVolCreateXML) (storageVolCreateXMLFrom): Ensure parsed key doesn't confuse volume creation. * docs/schemas/basictypes.rng (volName): Relax definition. * tests/storagepoolxml2xmltest.c (mymain): Test it. * tests/storagevolxml2xmltest.c (mymain): Likewise. * tests/storagepoolxml2xmlin/pool-dir-naming.xml: New file. * tests/storagepoolxml2xmlout/pool-dir-naming.xml: Likewise. * tests/storagevolxml2xmlin/vol-file-naming.xml: Likewise. * tests/storagevolxml2xmlout/vol-file-naming.xml: Likewise. * tests/storagevolxml2xmlout/vol-*.xml: Fix fallout. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Doug Goldstein 提交于
Commit de51dc9c primarily added virConnectGetCPUModelNames as libvirt.getCPUModelNames(conn, arch) instead of libvirt.virConnect.getCPUModelNames(arch) so revert the code that does the former while leaving the code that does the later. This is the rest of the patch that was ACK'd by Dan but I committed only the partial patch in 6a8b8ae4.
-
- 21 11月, 2013 18 次提交
-
-
由 Doug Goldstein 提交于
Commit de51dc9c primarily added virConnectGetCPUModelNames as libvirt.getCPUModelNames(conn, arch) instead of libvirt.virConnect.getCPUModelNames(arch) so revert the code that does the former while leaving the code that does the later.
-
由 Wangyufei (A) 提交于
delete extra character 'p' from the comment of virInterfaceCreate Signed-off-by: NWang Yufei <james.wangyufei@huawei.com>
-
由 Eric Farman 提交于
If a SCSI hostdev is included in an initial domain XML, without a corresponding controller statement, one is created silently when the guest is booted. When hotplugging a SCSI hostdev, a presumption is that the controller is already present in the domain either from the original XML, or via an earlier hotplug. [root@xxxxxxxx ~]# cat disk.xml <hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host0'/> <address bus='0' target='3' unit='1088438288'/> </source> </hostdev> [root@xxxxxxxx ~]# virsh attach-device guest01 disk.xml error: Failed to attach device from disk.xml error: internal error: unable to execute QEMU command 'device_add': Bus 'scsi0.0' not found Since the infrastructure is in place, we can also create a controller silently for use by the hotplugged hostdev device. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
-
由 Eric Farman 提交于
For systems without a PCI bus, attaching a SCSI controller fails: [root@xxxxxxxx ~]# cat controller.xml <controller type='scsi' model='virtio-scsi' index='0' /> [root@xxxxxxxx ~]# virsh attach-device guest01 controller.xml error: Failed to attach device from controller.xml error: XML error: No PCI buses available A similar problem occurs with the detach of a controller: [root@xxxxxxxx ~]# virsh detach-device guest01 controller.xml error: Failed to detach device from controller.xml error: operation failed: controller scsi:0 not found The qemuDomainXXtachPciControllerDevice routines made assumptions that any caller had a PCI bus. These routines now selectively calls PCI functions where necessary, and assigns the device information type to one appropriate for the bus in use. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com> Signed-off-by: NJán Tomko <jtomko@redhat.com>
-
由 Eric Farman 提交于
For attach/detach of controller devices, we rename the functions to remove 'PCI' from their title. The actual separation of PCI-specific operations will be handled in the next patch. Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
-
由 Osier Yang 提交于
It makes no sense to go forward to get the parent host number of a HBA, and treat the HBA as a vHBA with trying to delete it. Signed-off-by: NOsier Yang <jyang@redhat.com>
-
由 Clark Laughlin 提交于
These changes allow the correct virtio-blk-device and virtio-net-device devices to be used for the 'virt' machine type for armv7 rather than the PCI virtio devices. A test case was added to qemuxml2argvtest for this change. Signed-off-by: NClark Laughlin <clark.laughlin@linaro.org>
-
由 Eric Blake 提交于
Enforce and document the style set up by the previous patches. * build-aux/bracket-spacing.pl: Add comma checks. * docs/hacking.html.in: Document the rules. * HACKING: Regenerate. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/network/bridge_driver.c: Consistently use commas. * src/node_device/node_device_hal.c: Likewise. * src/node_device/node_device_udev.c: Likewise. * src/storage/storage_backend_rbd.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/lxc/lxc_container.c: Consistently use commas. * src/openvz/openvz_driver.c: Likewise. * src/openvz/openvz_util.c: Likewise. * src/remote/remote_driver.c: Likewise. * src/test/test_driver.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/vbox/vbox_tmpl.c: Consistently use commas. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * python/libvirt-override.c: Consistently use commas. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/util/vircommand.c: Consistently use commas. * src/util/virlog.c: Likewise. * src/util/virnetdevbandwidth.c: Likewise. * src/util/virnetdevmacvlan.c: Likewise. * src/util/virnetdevvportprofile.c: Likewise. * src/util/virnetlink.c: Likewise. * src/util/virpci.c: Likewise. * src/util/virsysinfo.c: Likewise. * src/util/virusb.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * tests/sysinfotest.c: Consistently use commas. * tests/viratomictest.c: Likewise. * tests/vircgroupmock.c: Likewise. * tools/virsh-domain.c: Likewise. * tools/virsh-volume.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/qemu/qemu_cgroup.c: Consistently use commas. * src/qemu/qemu_command.c: Likewise. * src/qemu/qemu_conf.c: Likewise. * src/qemu/qemu_driver.c: Likewise. * src/qemu/qemu_monitor.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/libxl/libxl_driver.c: Consistently use commas. * src/xen/xend_internal.c: Likewise. * src/xen/xs_internal.c: Likewise. * src/xenapi/xenapi_driver.c: Likewise. * src/xenapi/xenapi_utils.c: Likewise. * src/xenxs/xen_sxpr.c: Likewise. * src/xenxs/xen_xm.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/conf/capabilities.c: Consistently use commas. * src/conf/domain_conf.c: Likewise. * src/conf/network_conf.c: Likewise. * src/conf/storage_conf.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Eric Blake 提交于
Most of our code base uses space after comma but not before; fix the remaining uses before adding a syntax check. * src/nwfilter/nwfilter_ebiptables_driver.c: Consistently use commas. * src/nwfilter/nwfilter_gentech_driver.c: Likewise. * src/nwfilter/nwfilter_learnipaddr.c: Likewise. * src/conf/nwfilter_conf.c: Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
- 20 11月, 2013 10 次提交
-
-
由 Cole Robinson 提交于
Possible fix for occasional libvirt-guests failure at boot time: https://bugzilla.redhat.com/show_bug.cgi?id=906009
-
由 Daniel P. Berrange 提交于
For a while we're have random failures of 'securityselinuxtest' which were not at all reproducible. Fortunately we finally caught a failure with VIR_TEST_DEBUG=1 enabled. This revealed TEST: securityselinuxtest 1) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK 2) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK 3) GenLabel "dynamic unconfined, s0, c0.c1023" ... OK 4) GenLabel "dynamic virtd, s0, c0.c1023" ... OK 5) GenLabel "dynamic virtd, s0, c0.c10" ... OK 6) GenLabel "dynamic virtd, s2-s3, c0.c1023" ... OK 7) GenLabel "dynamic virtd, missing range" ... Category two 1024 is out of range 0-1023 FAILED FAIL: securityselinuxtest And sure enough we had an off-by-1 in the MCS range code when the current process has no range set. The test suite randomly allocates 2 categories from 0->1024 so the chances of hitting this in the test suite were slim indeed :-) Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Michael Chapman 提交于
RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc directives are present, prior to copying in the marked documentation. This means we can't prepopulate this directory with the HTML documentation during the %install phase. Instead, move the HTML documentation to a temporary directory during %install and mark the contents of this temporary directory with %doc. This fixes a build regression introduced in commit e23216da Author: Cole Robinson <crobinso@redhat.com> Date: Wed Sep 25 13:20:40 2013 -0400 spec: Clean up distribution of ChangeLog (and others) where the libvirt-docs sub-RPM gained a %doc directive, thus triggering the RPM bug. Signed-off-by: NMichael Chapman <mike@very.puzzling.org>
-
由 Ján Tomko 提交于
-
由 Ján Tomko 提交于
-
由 Ján Tomko 提交于
-
由 Eric Blake 提交于
All our .pl scripts had the executable bit set, except for one. Make it consistent (even if we invoke the scripts as an argument to $(PERL) rather than directly). * src/check-aclrules.pl: Make executable. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Guido Günther 提交于
Syslog is socket activated since at least systemd v35 so we can drop this dependency. Debian's linitian otherwise complains about it. References: http://www.freedesktop.org/wiki/Software/systemd/syslog/ http://lintian.debian.org/tags/systemd-service-file-refers-to-obsolete-target.html
-
由 Hao Liu 提交于
All *-info virsh commands output a list of colon-seperated key-val pairs. But virsh net-info command misses this colon for key "Name" and "UUID". Signed-off-by: NHao Liu <hliu@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Doug Goldstein 提交于
The case label for VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED did not have its own break statement but relied on falling through which we probably don't want.
-
- 19 11月, 2013 6 次提交
-
-
由 Michal Privoznik 提交于
In the 730af8f2 commit we are fixing broken qemu startup on systems with ancient qemu. This commit introduces the regression test for that specific case to make sure we don't break it again. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Michal Privoznik 提交于
On the domain startup, this function is called to dump some info about the CPUs. At the beginning of the function we check if we aren't running older qemu which is not exposing the CPUs via 'qom-list'. However, we are not checking for even older qemus, which throw 'CommandNotFound' error. Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
-
由 Ryota Ozaki 提交于
A USB filter is stored in a hostdev. The original code doesn't allocate hostdev->info that is expected to be allocated with hostdev. So use virDomainHostdevDefAlloc() to allocate both as we expect. Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>
-
由 Eric Blake 提交于
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix typo. * src/qemu/qemu_monitor.c (qemuMonitorSend): Likewise. Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Ryota Ozaki 提交于
This patch shuts up the following warning of clang on Mac OS X: virsh.c:2761:22: error: assigning to 'char *' from 'const char [6]' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers] rl_readline_name = "virsh"; ^ ~~~~~~~ The warning happens because rl_readline_name on Mac OS X comes from an old readline header that still uses 'char *', while it is 'const char *' in readline 4.2 (April 2001) and newer. Tested on Mac OS X 10.8.5 (clang-500.2.75) and Fedora 19 (gcc 4.8.1). Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com> Signed-off-by: NEric Blake <eblake@redhat.com>
-
由 Doug Goldstein 提交于
Added a macro similar to the GLib's GLIB_CHECK_VERSION so that one can simply do something like: #if LIBVIR_CHECK_VERSION(1,1,3) /* Call function here that appeared in 1.1.3 and newer */ virSomeNewFunction(); #endif
-