Since we now always do the snapshot via the 'transaction' command we can
drop the code which would enter monitor for individual disk snapshots.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

While qemu supports the 'transaction' command since v1.1.0
(52e7c241ac766406f05fa) and the 'blockdev-snapshot-sync' command since
v0.14.0-rc0 we need to keep the capability bits present since some qemu
downstreams (RHEL/CentOS 7 for example) chose to cripple qemu by
arbitrarily compiling out some stuff which was already present at that
time.

To simplify the crazy code just require both commands to be present at
the beginning of an external snapshot so that we can remove the case when
'transaction' would not be supported.

This also allows to drop any logic connected to the
VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC flag since snapshots are atomic with
the 'transaction' command.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If a domain is configured to start on boot, it has a symlink to the
domain definition inside the autostart directory. If you rename this
domain, the definition is renamed too. The symlink need to be pointed to
this renamed file. This commit recreates the symlink after renaming the
XML file.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1594985Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Yajl has not seen much activity upstream recently.
Switch to using Jansson >= 2.5.

All the platforms we target on https://libvirt.org/platforms.html
have a version >= 2.7 listed on the sites below:
https://repology.org/metapackage/jansson/versions
https://build.opensuse.org/package/show/devel:libraries:c_c++/libjansson

Additionally, Ubuntu 14.04 on Travis-CI has 2.5. Set the requirement
to 2.5 since we don't use anything from newer versions.

Implement virJSONValue{From,To}String using Jansson, delete the yajl
code (and the related virJSONParser structure) and report an error
if someone explicitly specifies --with-yajl.

Also adjust the test data to account for Jansson's different whitespace
usage for empty arrays and tune up the specfile to keep 'make rpm'
working when bisecting.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.
Signed-off-by: NTomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When VIR_DOMAIN_SCHEDULER_GLOBAL_PERIOD is matched "cputune.global_period"
should be updated and not "cputune.period".
Signed-off-by: NKaterina Koukiou <kkoukiou@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1600427Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This event is emitted on the monitor if one of pr-managers lost
connection to its pr-helper process. What libvirt needs to do is
restart the pr-helper process iff it corresponds to managed
pr-manager.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

This argument is not used anymore. The only function that is
passing non-NULL (qemuDomainSaveMemory) does not actually care
for the value (after 23087cfd) and every other caller just
passes NULL anyway.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1585108

When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This was lost in c57f3fd2. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

When updating device it's worth parsing live info too as users
might want to update it as well.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Now that the nwfilter driver keeps a list of bindings that it has
created, there is no need for the complex virt driver callbacks. It is
possible to simply iterate of the list of recorded filter bindings.

This means that rebuilding filters no longer has to acquire any locks on
the virDomainObj objects, as they're never touched.
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

fix 'device' leak in qemuDomainBlockJobSetSpeed

Signed-off-by: Jie Wang <wangjie88.huawei.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1591628

Attempting to use the FORCE flag for snapshot-revert was resulting
in failures because qemuProcessStart and qemuProcessStartCPUs were
using QEMU_ASYNC_JOB_START after a qemuProcessStop resulting in an
error when entering the monitor:

error: internal error: unexpected async job 6 type expected 0

So create a local @jobType, initialize to QEMU_ASYNC_JOB_START, and
change to QEMU_ASYNC_JOB_NONE if we end up in the --force path
where the qemuProcessStop is run before a Start and StartCPUs.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

If the the snapshot revert involves a forced revert option, then
let's not cause startup to change the genid flag in order to signify
that we're still running the same/previous guest and not some
snapshot reversion.

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1149445Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Use and set the @start_flags at the top of the RUNNING and PAUSED
transitions to GEN_VMID | PAUSED.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Promote the @start_flags to the top of the function, a
subsequent patch needs to use it.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

There are two sets of functions here:
1) some functions talk on both monitor and agent monitor,
2) some functions only talk on agent monitor.

For functions from set 1) we need to use
qemuDomainObjBeginJobWithAgent() and for functions from set 2) we
need to use qemuDomainObjBeginAgentJob() only.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

Now that we have agent job we can grab it while freezing/thawing
guest file system before/after doing snapshot.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJiri Denemark <jdenemar@redhat.com>

If measurement retrieval fails we'd forget to call ExitMonitor to unlock
the monitor.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reported-by: NLuyao Huang <lhuang@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>

Since it's being called with QEMU_ASYNC_JOB_NONE which is what
qemuDomainObjEnterMonitor is going to use with the internal helper,
let's use that one instead.
Signed-off-by: NErik Skultety <eskultet@redhat.com>
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1552092

If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.

The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1591561

For reasons I don't understand my original patch of 75f0fd51
freed not only the chardev from domain but also the one from
passed virDomainDeviceDefPtr. This caused no troubles until now,
because those two pointers were separate, but after I've
introduced virDomainDetachDeviceAlias() they became the same
resulting in double free on detach.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Free tmp even on failure.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NBrijesh Singh <brijesh.singh@amd.com>
Tested-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

And replace all calls with virObjectEventStateQueue such that:

    qemuDomainEventQueue(driver, event);

becomes:

    virObjectEventStateQueue(driver->domainEventState, event);

And remove NULL checking from all callers.
Signed-off-by: NAnya Harter <aharter@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This patch implements the internal driver API for launch event into
qemu driver. When SEV is enabled, execute 'query-sev-launch-measurement'
to get the measurement of memory encrypted through launch sequence.
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Fix the error message to indicate what exactly is failing - that
the controller index provided matches an existing controller.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

On start up of libvirtd the worker pool of the QEMU driver must be
initialized before trying to reconnect to all the running QEMU
instances. Otherwise segmentation faults can occur if there are QEMU
monitor events emitted.

 #0  __GI___pthread_mutex_lock
 #1  0x000003fffdba9e62 in virMutexLock
 #2  0x000003fffdbab2dc in virThreadPoolSendJob
 #3  0x000003ffd8343b70 in qemuProcessHandleSerialChanged
 #4  0x000003ffd836a776 in qemuMonitorEmitSerialChange
 #5  0x000003ffd8378e52 in qemuMonitorJSONHandleSerialChange
 #6  0x000003ffd8378930 in qemuMonitorJSONIOProcessEvent
 #7  0x000003ffd837edee in qemuMonitorJSONIOProcessLine
 #8  0x000003ffd837ef86 in qemuMonitorJSONIOProcess
 #9  0x000003ffd836757a in qemuMonitorIOProcess
 #10 0x000003ffd836863e in qemuMonitorIO
 #11 0x000003fffdb4033a in virEventPollDispatchHandles
 #12 0x000003fffdb4055e in virEventPollRunOnce
 #13 0x000003fffdb3e782 in virEventRunDefaultImpl
 #14 0x000003fffdc89400 in virNetDaemonRun
 #15 0x000000010002a816 in main
Signed-off-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: NBjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Previous patch naively removed all code relevant to disk format
checking. The semantics now dictate that the format check when creating
external snapshots is now impossible as we always fill in the format for
disks in domain definition in the post-parse callback.

Remove the impossible code path.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The option is insecure and it has been long enough for users to migrate
their disk files to use explicit format. Drop the option and related
code.

The config parser still parses it and rejects statup if it's still
present in the config in enabled state.

The augeas lens is also kept so that users can disable it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Replace instances where we previously called virGetLastError just to
either get the code or to check if an error exists with
virGetLastErrorCode to avoid a validity pre-check.
Signed-off-by: NRamy Elkest <ramyelkest@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

The code that detaches the device from persistent definition copies the
persistent definition first so that it can easily be rolled back. The
actual detaching is then made in the copy which is assigned back on
success (if the live operation succeeded as well).

This is not the case in qemuDomainDetachDeviceAliasLiveAndConfig where
the definition was copied and put back, but the detaching happened from
the other object which was overwritten.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Emphasize that it's for the 'drive' part of the disk.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The function adds the object of a certain type. Change the name so that
we make room for the generic function.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1291851Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1291851Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Allow hotplugging the vsock device.

https://bugzilla.redhat.com/show_bug.cgi?id=1291851Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>