- 13 11月, 2010 4 次提交
-
-
由 Matthias Bolte 提交于
Tweak pre tags to achieve proper indentation of their plaintext representation. Also use more b/i/code tags.
-
由 Justin Clift 提交于
-
由 Justin Clift 提交于
-
由 Justin Clift 提交于
Using temporary location links for the moment, until we get a proper place to store the files on the libvirt.org server.
-
- 12 11月, 2010 24 次提交
-
-
由 Cole Robinson 提交于
-
由 John Morrissey 提交于
-
由 Matthias Bolte 提交于
This makes the storage driver fail when the connection is opened with the VIR_CONNECT_RO flag, resulting in a read-only connection with no storage driver.
-
由 Matthias Bolte 提交于
-
由 Stefan Berger 提交于
In a first step I am converting the netlink message construction in macvtap code to use libnl. It's pretty much a 1:1 conversion except that now the message needs to be allocated and deallocated.
-
由 Laine Stump 提交于
IP addresses and MAC addresses had been defined in the RNG simply as <text/> meaning that, according to the RNG, any string could go in there. Of course the C parsing code does a much better job of validating, but we may as well have this describing the contents accurately (even though it's currently only used during "make check").
-
由 Laine Stump 提交于
This commit is whitespace changes only, do avoid obscuring actual code changes.
-
由 Laine Stump 提交于
All the other RNG files in libvirt are enclosed within <grammar>. This commit makes the syntactical changes necessary to make network.rng fit that pattern. (This is the first step in adding some data type definitions to network.rng for more exact validation of IP and MAC addresses). Formatting changes (indentation) will be done in a subsequent commit, so that actual changes to the code won't be obscured by whitespace.
-
由 Jamie Strandboge 提交于
When <uuid> is not in the XML, a virUUIDGenerate() ends up being called which is unnecessary and can lead to crashes if /dev/urandom isn't available because virRandomInitialize() is not called within virt-aa-helper. This patch adds verify_xpath_context() and updates caps_mockup() to use it. Bug-Ubuntu: https://launchpad.net/bugs/672943
-
由 Matthias Bolte 提交于
-
由 Laine Stump 提交于
-
由 Laine Stump 提交于
If virDomainAttachDevice() was called with an image that was located on a root-squashed NFS server, and in a directory that was unreadable by root on the machine running libvirtd, the attach would fail due to an attempt to change the selinux label of the image with EACCES (which isn't covered as an ignore case in SELinuxSetFilecon()) NFS doesn't support SELinux labelling anyway, so we mimic the failure handling of commit 93a18bba, which just ignores the errors if the target is on an NFS filesystem (in SELinuxSetSecurityAllLabel() only, though.) This can be seen as a follow-on to commit 347d266c, which ignores file open failures of files on NFS that occur directly in virDomainDiskDefForeachPath() (also necessary), but does not ignore failures in functions that are called from there (eg SELinuxSetSecurityFileLabel()).
-
由 Daniel P. Berrange 提交于
The event watches need to be removed before the event loop terminates, otherwise they cause a dangling reference to be held on the virStreamPtr, which in turns holds a reference on virConnectPtr, which in turn causes errors like "Failed to disconnect from the hypervisor" * tools/console.c: Remove watches before event loop quits * tools/virsh.c: Print out dangling reference count
-
由 Daniel P. Berrange 提交于
Introduce implementations of the virDomainOpenConsole() API for LXC, Xen and UML drivers. * src/lxc/lxc_driver.c, src/lxc/lxc_driver.c, src/xen/xen_driver.c: Wire up virDomainOpenConsole
-
由 Daniel P. Berrange 提交于
When closing open streams after a client quits, the event callback was not removed. This mean that poll() was using a closed FD and returning POLLNVAL in a busy-wait loop. * daemon/stream.c: Disconnect stream callbacks
-
由 Daniel P. Berrange 提交于
This re-writes the 'virsh console' command so that it uses the new streams API. This lets it run remotely and/or as a non-root user. This requires that virsh be linked against the simple event loop from libvirtd in daemon/event.c As an added bonus, it can now connect to any console device, not just the first one. * tools/Makefile.am: Link to event.c * tools/console.c, tools/console.h: Rewrite to use the virDomainOpenConsole() APIs with streams * tools/virsh.c: Support choosing the console name via --devname $NAME
-
由 Daniel P. Berrange 提交于
The code currently uses pthreads APIs directly. This is not portable to Win32 threads. Switch it over to use the portability APIs. Also add a wrapper for pipe() which is subtely different on Win32 * daemon/event.c: Switch to use virMutex & virThread.
-
由 Daniel P. Berrange 提交于
The util/threads.c/h code already has APIs for mutexes, condition variables and thread locals. This commit adds in code for actually creating threads. * src/libvirt_private.syms: Export new symbols * src/util/threads.h: Define APIs virThreadCreate, virThreadSelf, virThreadIsSelf and virThreadJoin * src/util/threads-win32.c, src/util/threads-win32.h: Win32 impl of threads * src/util/threads-pthread.c, src/util/threads-pthread.h: POSIX impl of threads
-
由 Daniel P. Berrange 提交于
This provides an implementation of the virDomainOpenConsole API with the QEMU driver. For the streams code, this reuses most of the code previously added for the tunnelled migration streams since it is generic. * src/qemu/qemu_driver.c: Support virDomainOpenConsole
-
由 Daniel P. Berrange 提交于
To avoid the need for duplicating implementations of virStream drivers, provide a generic implementation that can handle any FD based stream. This code is copied from the existing impl in the QEMU driver, with the locking moved into the stream impl, and addition of a read callback The FD stream code will refuse to operate on regular files or block devices, since those can't report EAGAIN properly when they would block on I/O * include/libvirt/virterror.h, include/libvirt/virterror.h: Add VIR_FROM_STREAM error domain * src/qemu/qemu_driver.c: Remove code obsoleted by the new generic streams driver. * src/fdstream.h, src/fdstream.c, src/fdstream.c, src/libvirt_private.syms: Generic reusable FD based streams
-
由 Daniel P. Berrange 提交于
Now that bi-directional, non-blocking streams are supported in the remote driver, some of the VIR_WARN statements need to be reduced to VIR_DEBUG. * src/remote/remote_driver.c: Lower logging level
-
由 Daniel P. Berrange 提交于
This provides an implementation of the virDomainOpenConsole API for the remote driver client and server. * daemon/remote.c: Server side impl * src/remote/remote_driver.c: Client impl * src/remote/remote_protocol.x: Wire definition
-
由 Daniel P. Berrange 提交于
To enable virsh console (or equivalent) to be used remotely it is necessary to provide remote access to the /dev/pts/XXX pseudo-TTY associated with the console/serial/parallel device in the guest. The virStream API provide a bi-directional I/O stream capability that can be used for this purpose. This patch thus introduces a virDomainOpenConsole API that uses the stream APIs. * src/libvirt.c, src/libvirt_public.syms, include/libvirt/libvirt.h.in, src/driver.h: Define the new virDomainOpenConsole API * src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c, src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c, src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub API entry point
-
由 Daniel P. Berrange 提交于
The current remote driver code for streams only supports blocking I/O mode. This is fine for the usage with migration but is a problem for more general use cases, in particular bi-directional streams. This adds supported for the stream callbacks and non-blocking I/O. with the minor caveat is that it doesn't actually do non-blocking I/O for sending stream data, only receiving it. A future patch will try to do non-blocking sends, but this is quite tricky to get right. * src/remote/remote_driver.c: Allow non-blocking I/O for streams and support callbacks
-
- 11 11月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
The /dev/console device inside the container must NOT map to the real /dev/console device node, since this allows the container control over the current host console. A fun side effect of this is that starting a container containing a real Fedora OS will kill off your X server. Remove the /dev/console node, and replace it with a symlink to the primary console TTY * src/lxc/lxc_container.c: Replace /dev/console with a symlink to /dev/pty/0 * src/lxc/lxc_controller.c: Remove /dev/console from cgroups ACL
-
由 Eric Blake 提交于
* tools/virsh.c (vshParseArgv): Use NULL instead of 0 for pointer, and symbolic names for has_arg. Give --version an optional arg. (vshUsage): Document this. * tools/virsh.pod: Likewise.
-
由 Cole Robinson 提交于
QEMU allows forcing a CDROM eject even if the guest has locked the device. Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE. This has been requested for RHEV: https://bugzilla.redhat.com/show_bug.cgi?id=626305 v2: Change flag name, bool cleanups
-
由 Eric Blake 提交于
https://bugzilla.redhat.com/show_bug.cgi?id=649511 Regression of forcing 0700 permissions (which breaks guest startup because the qemu user can't see /var/lib/libvirt/*.monitor) was introduced in commit 66823690, as part of libvirt 0.8.2. * libvirt.spec.in (%files): Drop %{_localstatedir}/lib/libvirt, since libvirt depends on libvirt-client. (%files client): Guarantee 755 permissions on %(_localstatedir}/lib/libvirt, since the qemu user must be able to do pathname resolution to a subdirectory.
-
- 10 11月, 2010 7 次提交
-
-
由 Daniel Veillard 提交于
With some instruction on how to attach useful gdb backtraces
-
由 Adam Litke 提交于
I am trying to use a qcow image with libvirt where the backing 'file' is a qemu-nbd server. Unfortunately virDomainDiskDefForeachPath() assumes that backingStore is always a real file so something like 'nbd:0:3333' is rejected because a file with that name cannot be accessed. Note that I am not worried about directly using nbd images. That would require a new disk type with XML markup, etc. I only want it to be permitted as a backingStore The following patch implements danpb's suggestion: > I think I'm inclined to push the logic for skipping NBD one stage higher. > I'd rather expect virStorageFileGetMetadata() to return all backing > stores, even if not files. The virDomainDiskDefForeachPath() method > should definitely ignore non-file backing stores though. > > So what I'm thinking is to extend the virStorageFileMetadata struct and > just add a 'bool isFile' field to it. Default this field to true, unless > you see the prefix of nbd: in which case set it to false. The > virDomainDiskDefForeachPath() method can then skip over any backing > store with isFile == false Signed-off-by: NAdam Litke <agl@us.ibm.com> Cc: Daniel P. Berrange <berrange@redhat.com>
-
由 Matthias Bolte 提交于
xencapstest calls xenHypervisorMakeCapabilitiesInternal with conn == NULL which calls xenDaemonNodeGetTopology with conn == NULL when a recent enough Xen was detected (sys_interface_version >= SYS_IFACE_MIN_VERS_NUMA). But xenDaemonNodeGetTopology insists in having conn != NULL and fails, because it expects to be able to talk to an actual xend. We cannot do that in a 'make check' test. Therefore, only call the xend subdriver function when conn isn't NULL. Reported by Andy Howell and Jim Fehlig.
-
由 Laine Stump 提交于
These are in the newly added -V output.
-
由 Stefan Berger 提交于
Using automated replacement with sed and editing I have now replaced all occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of course. Some replacements were straight forward, others I needed to pay attention. I hope I payed attention in all the right places... Please have a look. This should have at least solved one more double-close error.
-
由 Matthias Bolte 提交于
Replace tab with spaces.
-
由 Matthias Bolte 提交于
Also add a test case for the VMX handling of it.
-
- 09 11月, 2010 1 次提交
-
-
由 Jiri Denemark 提交于
Both conf/domain_conf.c and domain XML documentation have <timer> elements inside /domain/clock. Change domain.rng schema to be consistent with them.
-