Diego reported a bug where virsh tries to initialize a readline
history directory during 'make check' run as root, but fails
because /root was read-only.

It turns out that I could reproduce this as non-root, by using:

mv ~/.virsh{,.bak}
chmod a-w ~
make check -C tests TESTS=int-overflow
chmod u+w ~
mv ~/.virsh{.bak,}

* tests/int-overflow: Don't trigger interactive mode.
Reported by Diego Elio Pettenò.

* src/qemu/qemu_process.c (qemuProcessStart, qemuProcessStop): Fix
typos.
* docs/hooks.html.in: Document 'prepare' and 'release' hooks.

Otherwise, if something like doStopVcpus fails after the first
restore, a second restore is attempted and throws a useless
warning.

* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Avoid second
restore of state label.

The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file

Which will lead "./configure --with-audit=yes" breaks.

Last pull from i18n CVS, then push to transifex.net which is now
our localization upstream:

http://www.transifex.net/projects/p/libvirt/resource/strings/

Some things to note in this patch:
   - we do extend libvirt scope beyond purely managing domains, there is
     already a number of blocks which are here as helpr functions to
     manage the resources on the host.
   - we are expanding in the direction of libvirt being sufficient to do
     most of the management on the Host (but within the limits of the need
     for virtualization, e.g. managing users on the host is out of scope)
   - we don't require anymore APIs to be supported by multiple
     hypervisors to get in, it's already the case in practice, but we
     should still make sure the semantic of those APIs are clear. We
     added quite a bit for QEmu, but for example I saw on IRC that VBox
     could emulate a network unplug/replug on a domain interface, and
     that would be a good addition even if a priori no other hypervisor
     supports it.
   - Make clear that all libvirt APIs are available remotely, which is
     key to use libvirt for building management tools.
   - link the goal page from the project main page

As for libvirt project directions, I think it just reflects the natural
evolution in the last couple of years. We are less hypervisor agnostic
and extending in the Host management. Clearly there is interest in
making sure libvirt is complete in term of features for the hypervisors
supported, especially the ones like KVM or LXC which don't really have
integrated management library.

* docs/goals.html.in: update the goals page
* docs/index.html.in: link it from the top page

* src/util/hooks.c (virHookCheck): Missing hooks should just be
debug, not warn.

Add missing open curly brace between function declaration of non-linux
variant of qemudDomainInterfaceStats() and its body.
Signed-off-by: NPhilipp Hahn <hahn@univention.de>

* configure.ac: Use xenlight: rather than libxenlight: in summary.
Suggested by Daniel Veillard.

Commit f44bfb7f was supposed to make sure no additional libvirt API (esp.
*Free) is called before remoteDispatchConnError() is called on error.
However, the patch missed two instances.

Sometimes, an asynchronous helper is started (such as a compressor
or iohelper program), but a later error means that we want to
abort that child.  Make this easier.

Note that since daemons and virCommandRunAsync can't mix, the only
time virCommandFree can reap a process is if someone did
virCommandRunAsync for a non-daemon and didn't stash the pid.

* src/util/command.h (virCommandAbort): New prototype.
* src/util/command.c (_virCommand): Add new field.
(virCommandRunAsync, virCommandWait): Track whether pid was used.
(virCommandFree): Reap child if caller did not request pid.
(virCommandAbort): New function.
* src/libvirt_private.syms (command.h): Export it.
* tests/commandtest.c (test19): New test.

It doesn't make sense to run a daemon without synchronously
waiting for the child process to reply whether the daemon has
been kicked off and pidfile written yet.

* src/util/command.c (VIR_EXEC_RUN_SYNC): New constant.
(virCommandRun): Set temporary flag.
(virCommandRunAsync): Use it to prevent async runs of intermediate
child when spawning asynchronous daemon grandchild.

Child processes don't always reach _exit(); if they die from a
signal, then any messages should still be accurate.  Most users
either expect a 0 status (thankfully, if status==0, then
WIFEXITED(status) is true and WEXITSTATUS(status)==0 for all
known platforms) or were filtering on WIFEXITED before printing
a status, but a few were missing this check.  Additionally,
nwfilter_ebiptables_driver was making an assumption that works
on Linux (where WEXITSTATUS shifts and WTERMSIG just masks)
but fails on other platforms (where WEXITSTATUS just masks and
WTERMSIG shifts).

* src/util/command.h (virCommandTranslateStatus): New helper.
* src/libvirt_private.syms (command.h): Export it.
* src/util/command.c (virCommandTranslateStatus): New function.
(virCommandWait): Use it to also diagnose status from signals.
* src/security/security_apparmor.c (load_profile): Likewise.
* src/storage/storage_backend.c
(virStorageBackendQEMUImgBackingFormat): Likewise.
* src/util/util.c (virExecDaemonize, virRunWithHook)
(virFileOperation, virDirCreate): Likewise.
* daemon/remote.c (remoteDispatchAuthPolkit): Likewise.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesExecCLI):
Likewise.

Hotpluging host usb device by text mode will fail, because the monitor
command 'device_add' outputs 'husb: using...' if it succeeds, but we
think the command should not output anything.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

Add the compiler attribute to ensure we don't introduce any more
ref bugs like were just patched in commit 9741f346, then explicitly
mark the remaining places in code that are safe.

* src/qemu/qemu_monitor.h (qemuMonitorUnref): Mark
ATTRIBUTE_RETURN_CHECK.
* src/conf/domain_conf.h (virDomainObjUnref): Likewise.
* src/conf/domain_conf.c (virDomainObjParseXML)
(virDomainLoadStatus): Fix offenders.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/vmware/vmware_conf.c (vmwareLoadDomains): Likewise.
* src/qemu/qemu_domain.c (qemuDomainObjBeginJob)
(qemuDomainObjBeginJobWithDriver)
(qemuDomainObjExitRemoteWithDriver): Likewise.
* src/qemu/qemu_monitor.c (QEMU_MONITOR_CALLBACK): Likewise.
Suggested by Daniel P. Berrange.

This simplifies several callers that were repeating checks already
guaranteed by util.c, and makes other callers more robust to now
reject directories.  remote_driver.c was over-strict - access(,R_OK)
is only needed to execute a script file; a binary only needs
access(,X_OK) (besides, it's unusual to see a file with x but not
r permissions, whether script or binary).

* cfg.mk (sc_prohibit_access_xok): New syntax-check rule.
(exclude_file_name_regexp--sc_prohibit_access_xok): Exempt one use.
* src/network/bridge_driver.c (networkStartRadvd): Fix offenders.
* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsInitGuest, qemuCapsInit, qemuCapsExtractVersionInfo):
Likewise.
* src/remote/remote_driver.c (remoteFindDaemonPath): Likewise.
* src/uml/uml_driver.c (umlStartVMDaemon): Likewise.
* src/util/hooks.c (virHookCheck): Likewise.

Bug https://bugzilla.redhat.com/show_bug.cgi?id=689374 reported libvirtd
crash during error dispatch.

The reason is that libvirtd uses remoteDispatchConnError() with non-NULL
conn parameter which means that virConnGetLastError() is used instead of
its thread safe replacement virGetLastError().

So when several libvirtd threads are reporting errors at the same time,
the errors can get mixed or corrupted or in case of bad luck libvirtd
itself crashes.

Since Daniel B. is going to rewrite this code from scratch on top of his
RPC infrastructure, I tried to come up with a minimal fix. Thus,
remoteDispatchConnError() now just ignores its conn argument and always
calls virGetLastError(). However, several callers had to be touched as
well, since no libvirt API is allowed to be called before dispatching
the error. Doing so would reset the error and we would have nothing to
dispatch. As a result of that, the code is not very nice but that
doesn't really make daemon/remote.c worse than it is now :-) And it will
all die soon, which is good.

The bug report also contains a reproducer in C which detects both mixed
up error messages and libvirtd crash. Before this patch, I was able to
crash libvirtd in about 20 seconds up to 3 minutes depending on number
of CPU cores (more is better) and luck.

Steps to reproduce this bug:
1. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver qcow2
   error: Failed to attach disk
   error: operation failed: adding scsi-disk,bus=scsi0.0,scsi-id=1,drive=drive-scsi0-0-1,id=scsi0-0-1 device failed: Property 'scsi-disk.drive' can't find value 'drive-scsi0-0-1'
2. service libvirtd restart
   Stopping libvirtd daemon:                                  [  OK  ]
   Starting libvirtd daemon:                                  [  OK  ]
3. virsh attach-disk domain --source diskimage --target sdb --sourcetype file --driver qemu --subdriver raw
   error: Failed to attach disk
   error: operation failed: adding lsi,id=scsi0,bus=pci.0,addr=0x6 device failed: Duplicate ID 'scsi0' for device

The reason is that we create a new scsi controller but we do not update
/var/run/libvirt/qemu/domain.xml.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

Not every day you see a patch that nukes 27 files!

* .gnulib: Update to latest, for maint.mk improvements
* bootstrap: Resync to gnulib.
* bootstrap.conf (ACLOCAL): Swap the secondary aclocal include
directory, now that bootstrap picks up gnulib/m4 instead of m4.
* Makefile.am (syntax_check_exceptions, EXTRA_DIST): No longer
worry about nuked files.
* cfg.mk (sc_x_sc_dist_check): Delete dead rule.
(VC_LIST_ALWAYS_EXCLUDE_REGEX): Add HACKING.
(exclude_file_name_regexp--sc_*): Inline and simplify contents...
* .x-sc_*: ...from here, then delete the files.

* src/util/command.c (virCommandRunAsync): Since virExec only
creates pidfiles for daemon, enforce this in virCommand.

The ref count was assigned to 1 at creation, then never modified again
until it was decremented just before freeing the object.

* src/conf/domain_conf.h (_virDomainSnapshotObj): Delete unused
field.
(virDomainSnapshotObjUnref): Delete unused prototype.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.c (virDomainSnapshotObjNew)
(virDomainSnapshotObjListDataFree): Update users.
(virDomainSnapshotObjUnref): Delete.

Among others, the missing radvd dependency showed up as:

error: Failed to start network ipv6net
error: Cannot find radvd - Possibly the package isn't installed: No such file
or directory

even when radvd was installed, because the RADVD preprocessor
symbol was missing at configure time.

* libvirt.spec.in (with_network): Add BuildRequires for radvd,
iptables, and ip6tables.
(BuildRequires): Add libxslt and augeas for docs and test.
(with_libvirtd): Add module-init-tools for modprobe.
(with_nwfilter): Add BuildRequires for ebtables.
(with_esx): Fix esx build on RHEL 5, thanks to curl-devel rename.

* libvirt.spec.in (Requires): Reorganize requirements a bit; no
functional change.

Problem:
  "parser.head" is not NULL even if it's free'ed by "virJSONValueFree",
returning "parser.head" when "virJSONValueFromString" fails will cause
unexpected errors (libvirtd will crash sometimes), e.g.
  In function "qemuMonitorJSONArbitraryCommand":

        if (!(cmd = virJSONValueFromString(cmd_str)))
            goto cleanup;

        if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
            goto cleanup;

        ......

     cleanup:
        virJSONValueFree(cmd);

  It will continues to send command to monitor even if "virJSONValueFromString"
is failed, and more worse, it trys to free "cmd" again.

  Crash example:
{"error":{"class":"QMPBadInputObject","desc":"Expected 'execute' in QMP input","data":{"expected":"execute"}}}
{"error":{"class":"QMPBadInputObject","desc":"Expected 'execute' in QMP input","data":{"expected":"execute"}}}
error: server closed connection:
error: unable to connect to '/var/run/libvirt/libvirt-sock', libvirtd may need to be started: Connection refused
error: failed to connect to the hypervisor

  This fix is to:
    1) return NULL for failure of "virJSONValueFromString",
    2) and it seems "virJSONValueFree" uses incorrect loop index for type
       of "VIR_JSON_TYPE_OBJECT", fix it together.

* src/util/json.c

Steps to reproduce this bug:
# cat usb.xml
<hostdev mode='subsystem' type='usb'>
  <source>
    <address bus='0x001' device='0x003'/>
  </source>
</hostdev>
# virsh attach-device vm1 usb.xml
error: Failed to attach device from usb.xml
error: server closed connection:

The reason of this bug is that we set data.cgroup to NULL, and this will cause
libvirtd crashed.
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>

A future patch will change reference counting idioms; consolidating
this pattern now makes the next patch smaller (touch only the new
macro rather than every caller).

* src/qemu/qemu_monitor.c (QEMU_MONITOR_CALLBACK): New helper.
(qemuMonitorGetDiskSecret, qemuMonitorEmitShutdown)
(qemuMonitorEmitReset, qemuMonitorEmitPowerdown)
(qemuMonitorEmitStop, qemuMonitorEmitRTCChange)
(qemuMonitorEmitWatchdog, qemuMonitorEmitIOError)
(qemuMonitorEmitGraphics): Use it to reduce duplication.

Commit cb4aba9b forgot xenapi.

* src/xenapi/xenapi_driver.c (xenapiDriver): Adjust to recent API.

This patch introduces PREASSOCIATE-RR during incoming VM migration on the
destination host. This is similar to the usage of PREASSOCIATE during
migration in 8021qbg libvirt code today. PREASSOCIATE-RR is a VDP operation.
With the latest at IEEE, 8021qbh will need to support VDP operations.
A corresponding enic driver patch to support PREASSOCIATE-RR for 8021qbh
will be posted for net-next-2.6 inclusion soon.

THe veth setup in LXC had a couple of flaws, first brInit did
not report any error when it failed. Second vethCreate() did
not correctly initialize the variable containing the return
code, so could report failure even when it succeeded.

* src/lxc/lxc_driver.c: Report error when brInit fails
* src/lxc/veth.c: Fix uninitialized variable

Enhance the QEMU migration monitoring loop, so that it can get
a signal to change migration speed on the fly

* src/qemu/qemu_domain.h: Add signal for changing speed on the fly
* src/qemu/qemu_driver.c: Wire up virDomainMigrateSetSpeed driver
* src/qemu/qemu_migration.c: Support signal for changing speed

* src/remote/remote_protocol.x: Define wire protocol
* daemon/remote.c, src/remote/remote_driver.c: Add new
  functions for virDomainMigrateSetSpeed API
* src/remote/remote_protocol.c, src/remote/remote_protocol.h,
  daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
  daemon/remote_dispatch_table.h: Re-generate files

It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions

* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/libxl/libxl_driver.c: Stub new API

* AUTHORS: Update, to satisfy 'make syntax-check'.

The xen RPM in Fedora isn't new enough to support libxl builds
yet. Disable it until Fedora 16

* libvirt.spec.in: Disable libxl on Fedora < 16

fallback to HMP drive_add/drive_del commands if not found in QMP

Avoids calling text monitor methods when it is know they will not
succeed and also results in nicer error messages.