Since we switched from direct host migration scheme to the one,
where we connect to the destination and then just pass a FD to a
qemu, we have uncovered a qemu bug. Qemu expects migration FD to
block. However, we are passing a nonblocking one which results in
cryptic error messages like:

  qemu: warning: error while loading state section id 2
  load of migration failed

The bug is already known to Qemu folks, but we should workaround
already released Qemus. Patch has been originally proposed by Stefan
Hajnoczi <stefanha@gmail.com>

The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.

This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:

1) Get rid of the stuff from virCaps

2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.

This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.

qemuProcessStart expects to be run with a job already set and every
caller except for qemuMigrationPrepareAny use it correctly. This bug can
be observed in libvirtd logs during incoming migration as

    warning : qemuDomainObjEnterMonitorInternal:979 : This thread seems
    to be the async job owner; entering monitor without asking for a
    nested job is dangerous

s/VIR_QEMU_PROCESS_START_AUTODESROY/VIR_QEMU_PROCESS_START_AUTODESTROY/
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If a migration fails, we need to stop all block jobs running so
qemu doesn't try to send data to destination over and over again.

At the end of migration, it is important to stop NBD
server and thus release all allocated resources.

This function does the source part of NBD magic. It
invokes drive-mirror on each non shared and RW disk with
a source and wait till the mirroring process completes.
When it does we can proceed with migration.

Currently, an active waiting is done: every 500ms libvirt
asks qemu if block-job is finished or not.  However, once
the job finishes, qemu doesn't report its progress so we
can only assume if the job finished successfully or not.
The better solution would be to listen to the event which
is sent as soon as the job finishes. The event does
contain the result of job.

We need to start NBD server and feed it with all non-<shared/>,
RW and source-full disks. Moreover, with new virPortAllocator we
must ensure the borrowed port for NBD server will be returned if
either migration completes or qemu process is torn down.

This migration cookie is meant for two purposes. The first is to be sent
in begin phase from source to destination to let it know we support new
implementation of VIR_MIGRATE_NON_SHARED_{DISK,INC} so destination can
start NBD server. Then, the second purpose is, destination can let us
know, on which port the NBD server is running.

As a side effect, this also fixes reporting disk migration process.
It was added to memory migration progress, which was wrong. Disk
progress has dedicated fields in virDomainJobInfo structure.

To avoid having to hold the qemu driver lock while iterating through
close callbacks and calling them. This fixes a real deadlock when a
domain which is being migrated from another host gets autodestoyed as a
result of broken connection to the other host.

Due to "feature"/"features" nasty typo, any features marked as mandatory
by one side of a migration are silently considered optional by the other
side. The following is the code that formats mandatory features in
migration cookie:

    for (i = 0 ; i < QEMU_MIGRATION_COOKIE_FLAG_LAST ; i++) {
        if (mig->flagsMandatory & (1 << i))
            virBufferAsprintf(buf, "  <feature name='%s'/>\n",
                              qemuMigrationCookieFlagTypeToString(i));
    }

With the majority of fields in the virQEMUDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the QEMU driver lock. Only a handful
of helper APIs in qemu_conf.c now need it

The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The duplicate VM checking should be done atomically with
virDomainObjListAdd, so shoud not be a separate function.
Instead just use flags to indicate what kind of checks are
required.

This pair, used in virDomainCreateXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainRestoreFlags:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 1) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, true)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   VIR_DOMAIN_OBJ_LIST_ADD_LIVE |
                                   VIR_DOMAIN_OBJ_LIST_ADD_CHECK_LIVE,
                                   NULL)))
     goto cleanup;

This pair, used in virDomainDefineXML:

   if (virDomainObjListIsDuplicate(privconn->domains, def, 0) < 0)
     goto cleanup;
   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def, false)))
     goto cleanup;

Changes to

   if (!(dom = virDomainObjListAdd(privconn->domains,
                                   privconn->caps,
                                   def,
                                   0, NULL)))
     goto cleanup;

The APIs names for accessing the domain list object are
very inconsistent. Rename them all to have a standard
virDomainObjList prefix.

Currently the virQEMUDriverPtr struct contains an wide variety
of data with varying access needs. Move all the static config
data into a dedicated virQEMUDriverConfigPtr object. The only
locking requirement is to hold the driver lock, while obtaining
an instance of virQEMUDriverConfigPtr. Once a reference is held
on the config object, it can be used completely lockless since
it is immutable.

NB, not all APIs correctly hold the driver lock while getting
a reference to the config object in this patch. This is safe
for now since the config is never updated on the fly. Later
patches will address this fully.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If a compression binary prints something to stderr, currently
it is discarded. However, it can contain useful data from
debugging POV, so we should catch it.

We are already logging other arguments passed, however, @flags
were missing there.

The  virDomainObj, qemuAgent, qemuMonitor, lxcMonitor classes
all require a mutex, so can be switched to use virObjectLockable
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add checks for existence of GNUTLS and automatically disable
it if not found.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch exports qemuMigrationIsAllowed and adds a new parameter to it
to denote if it's a remote migration or a local migration. Local
migrations are used in snapshots and saving of the machine state and
have fewer restrictions. This patch also adjusts callers of the function
and tweaks some error messages to be more universal.

False positive, but it breaks the build with gcc-4.6.3.

qemu/qemu_migration.c:2931:37: error: 'offline' may be used
uninitialized in this function [-Werror=uninitialized]
qemu/qemu_migration.c:2887:10: note: 'offline' was declared here

Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.

Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).

Remove the obsolete 'qemud' naming prefix and underscore
based type name. Introduce virQEMUDriverPtr as the replacement,
in common with LXC driver naming style

Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>

Currently, if user calls virDomainAbortJob we just issue
'migrate_cancel' and hope for the best. However, if user calls
the API in wrong phase when migration hasn't been started yet
(perform phase) the cancel request is just ignored. With this
patch, the request is remembered and as soon as perform phase
starts, migration is cancelled.

The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This reverts commit 8d75e47e.

Libvirt was never released with support for migration cookies without
hostuuid.

For now, disk migration via block copy job is not implemented in
libvirt.  But when we do implement it, we have to deal with the
fact that qemu does not yet provide an easy way to re-start a qemu
process with mirroring still intact.  Paolo has proposed an idea
for a persistent dirty bitmap that might make this possible, but
until that design is complete, it's hard to say what changes
libvirt would need.  Even something like 'virDomainSave' becomes
hairy, if you realize the implications that 'virDomainRestore'
would be stuck with recreating the same mirror layout.

But if we step back and look at the bigger picture, we realize that
the initial client of live storage migration via disk mirroring is
oVirt, which always uses transient domains, and that if a transient
domain is destroyed while a mirror exists, oVirt can easily restart
the storage migration by creating a new domain that visits just the
source storage, with no loss in data.

We can make life a lot easier by being cowards for now, forbidding
certain operations on a domain.  This patch guarantees that we
never get in a state where we would have to restart a domain with
a mirroring block copy, by preventing saves, snapshots, migration,
hot unplug of a disk in use, and conversion to a persistent domain
(thankfully, it is still relatively easy to 'virsh undefine' a
running domain to temporarily make it transient, run tests on
'virsh blockcopy', then 'virsh define' to restore the persistence).
Later, if the qemu design is enhanced, we can relax our code.

The change to qemudDomainDefine looks a bit odd for undoing an
assignment, rather than probing up front to avoid the assignment,
but this is because of how virDomainAssignDef combines both a
lookup and assignment into a single function call.

* src/conf/domain_conf.h (virDomainHasDiskMirror): New prototype.
* src/conf/domain_conf.c (virDomainHasDiskMirror): New function.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/qemu/qemu_driver.c (qemuDomainSaveInternal)
(qemuDomainSnapshotCreateXML, qemuDomainRevertToSnapshot)
(qemuDomainBlockJobImpl, qemudDomainDefine): Prevent dangerous
actions while block copy is already in action.
* src/qemu/qemu_hotplug.c (qemuDomainDetachDiskDevice): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsAllowed): Likewise.