- 30 7月, 2012 13 次提交
-
-
由 Daniel P. Berrange 提交于
Update the gendispatch.pl script to get a little closer to being able to generate code for the LXC monitor, by passing in the struct prefix separately from the procedure prefix. Also allow method names using virCapitalLetters instead of vir_underscore_separator Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Move the code that handles the LXC monitor out of the lxc_process.c file and into lxc_monitor.{c,h} Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Update the LXC driver to use the virNetClient APIs for connecting to the libvirt_lxc monitor, instead of the low-level socket APIs. This is a step towards running a full RPC protocol with libvirt_lxc Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Update all LXC code to use virReportError instead of the custom lxcError macro Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Rename the lxc_driver_t struct typedef to virLXCDriver to more closely follow normal libvirt naming conventions Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
For consistency all the APIs in the lxc_domain.c file should have a virLXCDomain prefix in their name Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
For consistency all the APIs in the lxc_process.c file should have a virLXCProcess prefix in their name Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
In the socket event handler for the RPC client we must deal with read/write events, before checking for EOF, otherwise we might close the socket before we've read & acted upon the last RPC messages Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Use a driver close callback to trigger shutdown of the events demo program Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Update the remote driver to use the virNetClient close callback to trigger the virConnectPtr close callbacks Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Allow detection of socket close in virNetClient via a callback function, triggered on any condition that causes the socket to be closed. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Currently if the keepalive timer triggers, the 'markClose' flag is set on the virNetClient. A controlled shutdown will then be performed. If an I/O error occurs during read or write of the connection an error is raised back to the caller, but the connection isn't marked for close. This patch ensures that all I/O error scenarios always result in the connection being marked for close. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
Define new virConnect{Register,Unregister}CloseCallback() public APIs which allows registering/unregistering a callback to be invoked when the connection to a hypervisor is closed. The callback is provided with the reason for the close, which may be 'error', 'eof', 'client' or 'keepalive'. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 29 7月, 2012 1 次提交
-
-
由 Matthias Bolte 提交于
Print the actual unknown type name instead of <other> for AnyType objects.
-
- 28 7月, 2012 1 次提交
-
-
由 Jiri Denemark 提交于
If a domain is explicitly configured with <seclabel type="none"/> we correctly ensure that no labeling will be done by setting norelabel=true. However, if no seclabel element is present in domain XML and hypervisor is configured not to confine domains by default, we only set type to "none" without turning off relabeling. Thus if such a domain is being started, security driver wants to relabel resources with default label, which doesn't make any sense. Moreover, with SELinux security driver, the generated image label lacks "s0" sensitivity, which causes setfilecon() fail with EINVAL in enforcing mode.
-
- 27 7月, 2012 13 次提交
-
-
由 Eric Blake 提交于
Commit 3ad13c92 blindly touched all files to have a 3-line hint for getting LGPL, but bootstrap is synced from gnulib where it has a 2-line hint. * bootstrap: Resync from gnulib.
-
由 Gerd v. Egidy 提交于
I originally postet this into the Fedora bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=843836 Currently gracefully shutting down guest vms on host shutdown does not work on Fedora 17, the guests are killed hard on system shutdown. The reason is systemd considers libvirt-guests.service to be stopped when the system is running: $ systemctl status libvirt-guests.service libvirt-guests.service - Suspend Active Libvirt Guests Loaded: loaded (/usr/lib/systemd/system/libvirt-guests.service; enabled) Active: deactivating (stop) since Fri, 27 Jul 2012 15:47:31 +0200; 2min 48s ago Process: 1085 ExecStart=/etc/init.d/libvirt-guests start (code=exited, status=0/SUCCESS) Control: 1150 (libvirt-guests) CGroup: name=systemd:/system/libvirt-guests.service └ control ├ 1150 /bin/sh /etc/init.d/libvirt-guests stop └ 2257 sleep 1 libvirt-guests.service is defined as type "simple" in systemd (the default). That means systemd will shut down the service when the start executable is terminated after starting is done. Systemd will not call stop again on system shutdown because it thinks it is already stopped. The solution is to define it as type "oneshot" and set the flag "RemainAfterExit". Then systemd will consider the service as active after startup and will call the stop function on host shutdown.
-
由 Peter Krempa 提交于
Those fields are used by the apibuild script to create documentation. This commit partialy reverts a4bcefbc.
-
由 Peter Krempa 提交于
The method was not existing and did not allow to diagnose problems.
-
由 Eric Blake 提交于
Commit f9ce7dad tried to kill uses of a raw street address, but missed a few instances. Automate things so we don't introduce new problems in the future. * cfg.mk (sc_copyright_address): New rule. (exclude_file_name_regexp--sc_copyright_address): Add exemption. * bootstrap.conf: Adjust offenders. * build-aux/augeas-gentest.pl: Likewise. * examples/systemtap/events.stp: Likewise. * examples/systemtap/qemu-monitor.stp: Likewise. * examples/systemtap/rpc-monitor.stp: Likewise. * src/dtrace2systemtap.pl: Likewise. * src/esx/esx_vi_generator.py: Likewise. * src/hyperv/hyperv_wmi_generator.py: Likewise. * src/remote/qemu_protocol.x: Likewise. * src/remote/remote_protocol.x: Likewise. * src/rpc/gensystemtap.pl: Likewise. * src/rpc/virnetprotocol.x: Likewise. * tests/object-locking.ml: Likewise. * tools/virt-xml-validate.in: Likewise.
-
由 Osier Yang 提交于
This is a follow up patch of commit f9ce7dad, it modifies all the files which declare the copyright like "See COPYING.LIB for the License of this software" to use the detailed/consistent one. And deserts the outdated comments like: * libvirt-qemu.h: * Summary: qemu specific interfaces * Description: Provides the interfaces of the libvirt library to handle * qemu specific methods * * Copy: Copyright (C) 2010, 2012 Red Hat, Inc. Uses the more compact style like: * libvirt-qemu.h: Interfaces specific for QEMU/KVM driver * * Copyright (C) 2010, 2012 Red Hat, Inc.
-
由 Daniel P. Berrange 提交于
During refactoring of code, it has proved common to forget to remove old symbols from the .syms file. While the Win32 linker will complain about this, the Linux ELF linker does not. The new test case validates that every symbol listed in the .syms file actually exists in the built ELF libraries. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Daniel P. Berrange 提交于
The virNetClientSetEOFNotify symbol was accidentally added to the libvirt_private.syms file due to an out-of-order cherry-pick
-
由 Daniel P. Berrange 提交于
virNWFilterGetIpAddrForIfname and virNWFilterDelIpAddrForIfname do not exist, so remove them from libvirt_nwfilter.syms Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Peter Krempa 提交于
On some fallback paths in virsh, error reported by the previously failed API is cleared by virResetLastError() that doesn't free error stored by virsh. This patch changes this to clear it using vshResetLibvirtError().
-
由 Peter Krempa 提交于
Virsh uses an error handler to save errors from libvirt. On some code paths it's needed to clear libvirt errors and continue on fallback code paths without reporting failure. This patch adds function vshResetLibvirtError() that clears error returned by libvirt and updates all places where the old two-line method was used.
-
由 Eric Blake 提交于
Any time we have a string with no % passed through gettext, a translator can inject a % to cause a stack overread. When there is nothing to format, it's easier to ask for a string that cannot be used as a formatter, by using a trivial "%s" format instead. In the past, we have used --disable-nls to catch some of the offenders, but that doesn't get run very often, and many more uses have crept in. Syntax check to the rescue! The syntax check can catch uses such as virReportError(code, _("split " "string")); by using a sed script to fold context lines into one pattern space before checking for a string without %. This patch is just mechanical insertion of %s; there are probably several messages touched by this patch where we would be better off giving the user more information than a fixed string. * cfg.mk (sc_prohibit_diagnostic_without_format): New rule. * src/datatypes.c (virUnrefConnect, virGetDomain) (virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface) (virUnrefInterface, virGetStoragePool, virUnrefStoragePool) (virGetStorageVol, virUnrefStorageVol, virGetNodeDevice) (virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter) (virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper. * src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters) (lxcDomainGetBlkioParameters): Likewise. * src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML) (virDomainDiskDefParseXML, virDomainGraphicsDefParseXML): Likewise. * src/conf/network_conf.c (virNetworkDNSHostsDefParseXML) (virNetworkDefParseXML): Likewise. * src/conf/nwfilter_conf.c (virNWFilterIsValidChainName): Likewise. * src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple) (virNWFilterVarAccessParse): Likewise. * src/libvirt.c (virDomainSave, virDomainSaveFlags) (virDomainRestore, virDomainRestoreFlags) (virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML) (virDomainCoreDump, virDomainGetXMLDesc) (virDomainMigrateVersion1, virDomainMigrateVersion2) (virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2) (virStreamSendAll, virStreamRecvAll) (virDomainSnapshotGetXMLDesc): Likewise. * src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel) (virNWFilterDHCPSnoopReq): Likewise. * src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise. * src/openvz/openvz_util.c (openvzKBPerPages): Likewise. * src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise. * src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr) (qemuBuildCommandLine): Likewise. * src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise. * src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise. * src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity): Likewise. * src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX) (virNetSocketSendFD, virNetSocketRecvFD): Likewise. * src/storage/storage_backend_disk.c (virStorageBackendDiskBuildPool): Likewise. * src/storage/storage_backend_fs.c (virStorageBackendFileSystemProbe) (virStorageBackendFileSystemBuild): Likewise. * src/storage/storage_backend_rbd.c (virStorageBackendRBDOpenRADOSConn): Likewise. * src/storage/storage_driver.c (storageVolumeResize): Likewise. * src/test/test_driver.c (testInterfaceChangeBegin) (testInterfaceChangeCommit, testInterfaceChangeRollback): Likewise. * src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise. * src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr): Likewise. * src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk) (xenFormatXM): Likewise.
-
由 Eric Blake 提交于
We were defining 'func_or' as '|VIR_ERROR|...', which when put inside 'func_re' resulted in a regex that matches everything in isolation. Thankfully, we always used func_re with a leading anchor \<, and since the empty regex does not start a word, we happened to get the result we wanted; but it's better to define func_or without a leading space converted into a leading empty alternation. * cfg.mk (func_or): Strip leading space.
-
- 26 7月, 2012 12 次提交
-
-
由 Ján Tomko 提交于
-
由 Eric Blake 提交于
Pick up some build fixes in the latest gnulib. In particular, we want to ensure that official tarballs are secure, but don't want to penalize people who don't run 'make dist', since fixed automake still hasn't hit common platforms like Fedora 17. * .gnulib: Update to latest, for Automake CVE-2012-3386 detection. * bootstrap: Resync from gnulib. * bootstrap.conf (gnulib_extra_files): Drop missing, since gnulib has dropped it in favor of Automake's version. * cfg.mk (local-checks-to-skip): Conditionally skip the security check in cases where it doesn't matter.
-
由 Peter Krempa 提交于
When undefining a domain and removing associated storage using "virsh undefine --storage" the domain was at first undefined and after that the storage removal proces was started. If the user specified an invalid disk to remove, the error could not be corrected. This patch moves enumeration and filtering of volumes that should be removed before the domain is undefined, but the removal process is still kept after the domain has been undefined.
-
由 Guannan Ren 提交于
-
由 Guannan Ren 提交于
Change the permissible minimum value of nodesuspend duration time to 60 seconds. If option is less than the value, reports error. Update virsh help and manpage the infomation.
-
由 Osier Yang 提交于
* virsh-domain-monitor.c: Add domMonitoringCmds * virsh-domain.c: Add domManagementCmds * virsh-host.c: Add hostAndHypervisorCmds * virsh-interface.c: Add ifaceCmds * virsh-network.c: Add networkCmds * virsh-nodedev.c: Add nodedevCmds * virsh-nwfilter.c: Add nwfilterCmds * virsh-pool.c: Add storagePoolCmds * virsh-secret.c: Add secretCmds * virsh-snapshot.c: Add snapshotCmds * virsh-volume.c: Add storageVolCmds * virsh.c: Remove all the above *Cmds.
-
由 Osier Yang 提交于
Commands in node device group moved from virsh.c to virsh-nodedev.c, * virsh.c: Remove commands in node device group. * virsh-nodedev.c: New file, filled with commands in node device group * po/POTFILES.in: Add virsh-nodedev.c * cfg.mk: Skip to check config.h including for virsh-nodedev.c
-
由 Osier Yang 提交于
Commands in host group moved from virsh.c to virsh-host.c, * virsh.c: Remove commands in host group. * virsh-host.c: New file, filled with commands in host group * po/POTFILES.in: Add virsh-host.c * cfg.mk: Skip to check config.h including for virsh-host.c
-
由 Osier Yang 提交于
Commands to manage domain snapshot are moved from virsh.c to virsh-snapshot.c. * virsh.c: Remove domain snapshot commands. * virsh-snapshot.c: New file, filled with domain snapshot commands. * po/POTFILES.in: Add virsh-snapshot.c * cfg.mk: Skip strcase and config.h including checking for virsh-snapshot.c
-
由 Osier Yang 提交于
Commands to manage secret are moved from virsh.c to virsh-secret.c, with a few helpers for secret command use. * virsh.c: Remove secret commands and a few helpers. (vshCommandOptSecret, and vshCommandOptSecretBy) * virsh-secret.c: New file, filled with secret commands and its helpers. * po/POTFILES.in: Add virsh-secret.c * cfg.mk: Skip to check config.h including for virsh-secret.c
-
由 Osier Yang 提交于
Commands to manage network filter are moved from virsh.c to virsh-nwfilter.c, with a few helpers for network filter command use. * virsh.c: Remove network filter commands and a few helpers. (vshCommandOptNWFilter, and vshCommandOptNWFilterBy) * virsh-nwfilter.c: New file, filled with network filter commands and its helpers. * po/POTFILES.in: Add virsh-nwfilter.c * cfg.mk: Skip to check config.h including for virsh-nwfilter.c
-
由 Osier Yang 提交于
Commands to manage host interface are moved from virsh.c to virsh-interface.c, with a few helpers for interface command use. * virsh.c: Remove interface commands and a few helpers. (vshCommandOptInterface, vshCommandOptInterfaceBy) * virsh-interface.c: New file, filled with interface commands and its helpers. * cfg.mk: Skip to check config.h including for virsh-interface.c * po/POTFILES.in: Add virsh-interface.c
-