Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features

Here is an example of the feature XML definition:

<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
  <path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
  <parent>pci_0000_08_00_1</parent>
  <capability type='net'>
    <interface>eth4</interface>
    <address>90:e2:ba:5e:a5:45</address>
    <link speed='10000' state='up'/>
    <feature name='rx'/>
    <feature name='tx'/>
    <feature name='sg'/>
    <feature name='tso'/>
    <feature name='gso'/>
    <feature name='gro'/>
    <feature name='rxvlan'/>
    <feature name='txvlan'/>
    <feature name='rxhash'/>
    <capability type='80203'/>
  </capability>
</device>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

It's returning virNetworkObjPtr after all. And it matches the
pattern laid out by domain_conf.h.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

It's returning virNetworkObjPtr after all. And it matches the
pattern laid out by domain_conf.h.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information.  That was
caused by rewriting the patch since first draft.

Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1142631

This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.

While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.

Without the patch, the domblklist will list the same Target twice:

$ virsh domblklist $dom
Target     Source
------------------------------------------------
sda        /var/lib/libvirt/images/file.qcow2
sda        /var/lib/libvirt/images/file.img

Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.

Fortunately, hotplug disallows adding a "third" sda value:

$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists

$

BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'

$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device

$

Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:

$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'

$

Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.

The total NUMA memory consists of the sum of individual NUMA node memory
amounts.

This API joins the following two lines:

char *s = virBufferContentAndReset(buf1);
virBufferAdd(buf2, s, -1);

into one:

virBufferAddBuffer(buf2, buf1);

With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add helper to compare initial sizes of indivitual NUMA nodes and the map
of belonging vCPUs. Other configuration is not ABI.

Add the helpers and refactor places where the value is accessed without
them.

Add virDomainNumaGetNodeCpumask() and refactor a few places that would
get the cpu mask without the helper.

Add an accessor so that a later refactor is simpler.

Since our formatter now handles well if the config is allocated and not
filled we can safely always-allocate the NUMA config and remove the
ad-hoc allocation code.

This will help in later patches as the parser will be refactored to just
fill the data.

Move the existing virDomainDefNew to virDomainDefNewFull as it's setting
a few things in the conf and re-introduce virDomainDefNew as a function
without parameters for common use.

The structure will gradually become the only place for NUMA related
config, thus rename it appropriately.

For a while now there are two places that gather information about NUMA
related guest configuration. While the XML can't be changed we can at
least store the data in one place in the definition.

Rename the numatune_conf.[ch] files to numa_conf as later patches will
move the rest of the definitions from the cpu definition to this one.

This function is going to be needed in the near future.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We do have a check for valid per-domain security model, however we still
do permit an invalid security model for a domain's device (those which
are specified with <source> element).
This patch introduces a new function virSecurityManagerCheckAllLabel
which compares user specified security model against currently
registered security drivers. That being said, it also permits 'none'
being specified as a device security model.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485Signed-off-by: NJán Tomko <jtomko@redhat.com>

The enum converters are defined in the domain_conf.h (so
accessible widely across the code), but on the symbol layer, only
virDomainNetTypeToString was exposed. However, FromString variant
is going to be needed shortly.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This function uses sched_setscheduler() function so it works with
processes and threads as well (even threads not created by us, which is
what we'll need in the future).
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Add support for using the attach/detach device APIs on the inactive
configuration to add RNG devices.

The helpers will be useful when implementing hotplug and coldplug of
random number generator devices.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>

Signed-off-by: NLuyao Huang <lhuang@redhat.com>

When adding devices to the definition it's useful to check whether the
devices don't reside on a conflicting address. This patch adds a helper
that iterates all device info and compares the addresses with the given
info.

Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.

This helper eases iterating all key=value pairs stored in a JSON
object. Usually we pick only certain known keys from a JSON object, but
this will allow to walk complete objects and have the callback act on
those.

To be able to easily represent nodesets and other data stored in
virBitmaps in libvirt, this patch introduces a set of helpers that allow
to convert the bitmap to and from JSON value objects.

The virBitmapNew() function reports only OOM errors. Split out the
internals into a "quiet" function and add a wrapper that reports the
error.

To allow constructing of value objects stepwise explode the helper into
separate steps and allow appending into existing value objects.

Extract the logic to determine which nodeset has to be used for a domain
from the formatting step so that it can be reused separately when the
nodeset is used in a different way.

This patch provides the utility functions needed to synchronize
the rxfilter changes made to a guest domain with the corresponding
macvtap devices on the host:

* Get/set PROMISC flag
* Get/set ALLMULTI, MULTICAST
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Do the allocation first, then add the actual device.
The second part should never fail. This is good
for live hotplug where we don't want to remove the device
on OOM after the monitor command succeeded.

The only change in behavior is that on failure, the
vmdef->consoles array is freed, not just the first console.

For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.

For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.

This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants

struct _virConnectDriver {
    virHypervisorDriverPtr hypervisorDriver;
    virInterfaceDriverPtr interfaceDriver;
    virNetworkDriverPtr networkDriver;
    virNodeDeviceDriverPtr nodeDeviceDriver;
    virNWFilterDriverPtr nwfilterDriver;
    virSecretDriverPtr secretDriver;
    virStorageDriverPtr storageDriver;
};

Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A bunch of code is wrapped in #if WITH_LIBVIRTD in order to
enable the virStateDriver to be disabled when libvirtd is not
built. Disabling this code doesn't have any real functional
benefit beyond removing 1 pointer from the virConnectPtr struct,
while having a cost of many more conditionals.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Add a virDBusErrorIsUnknownMethod helper so that callers
don't need todo string comparisons themselves to detect
standard error names.

The virDBusMethodCall method has a DBusError as one of its
parameters. If the caller wants to pass a non-NULL value
for this, it immediately makes the calling code require
DBus at build time. This has led to breakage of non-DBus
builds several times. It is desirable that only the virdbus.c
file should need WITH_DBUS conditionals, so we must ideally
remove the DBusError parameter from the method.

We can't simply raise a libvirt error, since the whole point
of this parameter is to give the callers a way to check if
the error is one they want to ignore, without having the logs
polluted with an error message. So, we add a virErrorPtr
parameter which the caller can then either ignore or raise
using the new virReportErrorObject method.

This new method is distinct from virSetError in that it
ensures the logging hooks are run.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Moving code for parsing and formatting network routes to
networkcommon_conf helps reusing those routes for domains. The route
definition has been hidden to help reducing the number of unnecessary
checks in the format function.

Add a helper method that can validate an XML document against
an RNG schema

The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.