These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.

A test case was added to qemuxml2argvtest for this change.
Signed-off-by: NClark Laughlin <clark.laughlin@linaro.org>

Enforce and document the style set up by the previous patches.

* build-aux/bracket-spacing.pl: Add comma checks.
* docs/hacking.html.in: Document the rules.
* HACKING: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/vbox/vbox_tmpl.c: Consistently use commas.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* python/libvirt-override.c: Consistently use commas.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/util/vircommand.c: Consistently use commas.
* src/util/virlog.c: Likewise.
* src/util/virnetdevbandwidth.c: Likewise.
* src/util/virnetdevmacvlan.c: Likewise.
* src/util/virnetdevvportprofile.c: Likewise.
* src/util/virnetlink.c: Likewise.
* src/util/virpci.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/virusb.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/qemu/qemu_cgroup.c: Consistently use commas.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/qemu/qemu_monitor.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/libxl/libxl_driver.c: Consistently use commas.
* src/xen/xend_internal.c: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/xenapi/xenapi_utils.c: Likewise.
* src/xenxs/xen_sxpr.c: Likewise.
* src/xenxs/xen_xm.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/conf/capabilities.c: Consistently use commas.
* src/conf/domain_conf.c: Likewise.
* src/conf/network_conf.c: Likewise.
* src/conf/storage_conf.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.

* src/nwfilter/nwfilter_ebiptables_driver.c: Consistently use
commas.
* src/nwfilter/nwfilter_gentech_driver.c: Likewise.
* src/nwfilter/nwfilter_learnipaddr.c: Likewise.
* src/conf/nwfilter_conf.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Possible fix for occasional libvirt-guests failure at boot time:

https://bugzilla.redhat.com/show_bug.cgi?id=906009

For a while we're have random failures of 'securityselinuxtest'
which were not at all reproducible. Fortunately we finally
caught a failure with VIR_TEST_DEBUG=1 enabled. This revealed

TEST: securityselinuxtest
 1) GenLabel "dynamic unconfined, s0, c0.c1023"                       ... OK
 2) GenLabel "dynamic unconfined, s0, c0.c1023"                       ... OK
 3) GenLabel "dynamic unconfined, s0, c0.c1023"                       ... OK
 4) GenLabel "dynamic virtd, s0, c0.c1023"                            ... OK
 5) GenLabel "dynamic virtd, s0, c0.c10"                              ... OK
 6) GenLabel "dynamic virtd, s2-s3, c0.c1023"                         ... OK
 7) GenLabel "dynamic virtd, missing range"                           ... Category two 1024 is out of range 0-1023
FAILED
FAIL: securityselinuxtest

And sure enough we had an off-by-1 in the MCS range code when
the current process has no range set. The test suite randomly
allocates 2 categories from 0->1024 so the chances of hitting
this in the test suite were slim indeed :-)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

RHEL-6's rpmbuild wipes the docdir for a (sub-)package if any %doc
directives are present, prior to copying in the marked documentation.
This means we can't prepopulate this directory with the HTML
documentation during the %install phase.

Instead, move the HTML documentation to a temporary directory during
%install and mark the contents of this temporary directory with %doc.

This fixes a build regression introduced in

  commit e23216da
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Wed Sep 25 13:20:40 2013 -0400

    spec: Clean up distribution of ChangeLog (and others)

where the libvirt-docs sub-RPM gained a %doc directive, thus
triggering the RPM bug.
Signed-off-by: NMichael Chapman <mike@very.puzzling.org>

All our .pl scripts had the executable bit set, except for one.
Make it consistent (even if we invoke the scripts as an argument
to $(PERL) rather than directly).

* src/check-aclrules.pl: Make executable.
Signed-off-by: NEric Blake <eblake@redhat.com>

Syslog is socket activated since at least systemd v35 so we can drop
this dependency. Debian's linitian otherwise complains about it.

References:

    http://www.freedesktop.org/wiki/Software/systemd/syslog/
    http://lintian.debian.org/tags/systemd-service-file-refers-to-obsolete-target.html

All *-info virsh commands output a list of colon-seperated key-val pairs.
But virsh net-info command misses this colon for key "Name" and "UUID".
Signed-off-by: NHao Liu <hliu@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The case label for VIR_DOMAIN_EVENT_ID_DEVICE_REMOVED did not have its
own break statement but relied on falling through which we probably
don't want.

In the 730af8f2 commit we are fixing broken qemu startup on systems
with ancient qemu. This commit introduces the regression test for that
specific case to make sure we don't break it again.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

On the domain startup, this function is called to dump some info about
the CPUs. At the beginning of the function we check if we aren't running
older qemu which is not exposing the CPUs via 'qom-list'. However, we
are not checking for even older qemus, which throw 'CommandNotFound'
error.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

A USB filter is stored in a hostdev. The original code doesn't
allocate hostdev->info that is expected to be allocated with hostdev.
So use virDomainHostdevDefAlloc() to allocate both as we expect.
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>

* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix typo.
* src/qemu/qemu_monitor.c (qemuMonitorSend): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

This patch shuts up the following warning of clang
on Mac OS X:

  virsh.c:2761:22: error: assigning to 'char *' from 'const char [6]' discards qualifiers
      [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
      rl_readline_name = "virsh";
                       ^ ~~~~~~~

The warning happens because rl_readline_name on Mac OS X comes
from an old readline header that still uses 'char *', while it
is 'const char *' in readline 4.2 (April 2001) and newer.

Tested on Mac OS X 10.8.5 (clang-500.2.75) and Fedora 19 (gcc 4.8.1).
Signed-off-by: NRyota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Added a macro similar to the GLib's GLIB_CHECK_VERSION so that one can
simply do something like:

 #if LIBVIR_CHECK_VERSION(1,1,3)
   /* Call function here that appeared in 1.1.3 and newer */
   virSomeNewFunction();
 #endif

Without a 'return 0' in the stub lxcStartFuse() method, the
compiler warns:

lxc/lxc_fuse.c:374: error: control reaches end of non-void function
[-Wreturn-type]
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The glibc setxid is supposed to be async signal safe, but
libc developers confirm that it is not. This causes a problem
when libvirt_lxc starts the FUSE thread and then runs clone()
to start the container. If the clone() was done before the
FUSE thread has completely started up, then the container
will hang in setxid after clone().

The fix is to avoid creating any threads until after the
container has been clone()'d. By avoiding any threads in
the parent, the child is no longer required to run in an
async signal safe context, and we thus avoid the glibc
bug.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Report the error in virPortAllocatorAcquire instead
of doing it in every caller.

The error contains the port range name instead of the intended
use for the port, e.g.:
Unable to find an unused port in range 'display' (65534-65535)
instead of:
Unable to find an unused port for SPICE

This also adds error reporting when the QEMU driver could not
find an unused port for VNC, VNC WebSockets or NBD migration.

This allows its error messages to be more specific.

Introduced by 7b4a6304.

The connection pointer in the closeCallback data was never
initialized, making the unref in remoteClientCloseFunc a no-op.

This fixes the following leak in virsh when the daemon closes
the connection unexpectedly:

1,179 (288 direct, 891 indirect) bytes in 1 blocks are
   definitely lost in loss record 745 of 792
  at 0x4C2A6D0: calloc (in vgpreload_memcheck-amd64-linux.so)
  by 0x4E9643D: virAllocVar (viralloc.c:558)
  by 0x4ED2425: virObjectNew (virobject.c:190)
  by 0x4F675AC: virGetConnect (datatypes.c:116)
  by 0x4F6EA06: do_open (libvirt.c:1136)
  by 0x4F71017: virConnectOpenAuth (libvirt.c:1481)
  by 0x129FFA: vshReconnect (virsh.c:337)
  by 0x128310: main (virsh.c:2470)

Noticed while revieweing the patches for qemu's new migration state.

* include/libvirt/libvirt.h.in (_virDomainJobInfo): Fix typo,
grammar.
* src/libvirt.c (virDomainGetJobInfo): Add cross reference.
Signed-off-by: NEric Blake <eblake@redhat.com>

s/insallations/installations/
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>

QEMU 1.6.0 introduced new migration status: setup
Libvirt does not expect such string in QMP and refuses to migrate with error
"unexpected migration status in setup"

This patch fixes it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1025108

So far qemuSetupHostdevCGroup was called very early during hotplug, even
before we knew the device we were about to hotplug was actually
available. By calling the function later, we make sure QEMU won't be
allowed to access devices used by other domains.

Another important effect of this change is that hopluging USB devices
specified by vendor and product (but not by their USB address) works
again. This was broken since v1.0.5-171-g7d763aca, when the call to
qemuFindHostdevUSBDevice was moved after the call to
qemuSetupHostdevCGroup, which then used an uninitialized USB address.

https://bugzilla.redhat.com/show_bug.cgi?id=1018267

The aim of virObject refing and urefing is to tell where the object is
to be used and when is no longer needed. Hence any object shouldn't be
used after it has been unrefed, as we might be the last to hold the
reference. The better way is to call virObjectUnref() *after* the last
object usage. In this specific case, the monitor EOF handler was called
after the qemuMonitorIO called virObjectUnref. Not only that @mon was
disposed (which is not used in the handler anyway) but the @mon->vm
which is causing a SIGSEGV:

2013-11-15 10:17:54.425+0000: 20110: error : qemuMonitorIO:688 : internal error: early end of file from monitor: possible problem:
qemu-kvm: -incoming tcp:01.01.01.0:49152: Failed to bind socket: Cannot assign requested address

Program received signal SIGSEGV, Segmentation fault.
qemuProcessHandleMonitorEOF (mon=<optimized out>, vm=0x7fb728004170) at qemu/qemu_process.c:299
299         if (priv->beingDestroyed) {
(gdb) p *priv
Cannot access memory at address 0x0
(gdb) p vm
$1 = (virDomainObj *) 0x7fb728004170
(gdb) p *vm
$2 = {parent = {parent = {magic = 3735928559, refs = 0, klass = 0xdeadbeef}, lock = {lock = {__data = {__lock = 2, __count = 0, __owner = 20110, __nusers = 1, __kind = 0, __spins = 0, __list = {__prev = 0x0,
            __next = 0x0}}, __size = "\002\000\000\000\000\000\000\000\216N\000\000\001", '\000' <repeats 26 times>, __align = 2}}}, pid = 0, state = {state = 0, reason = 0}, autostart = 0, persistent = 0,
  updated = 0, def = 0x0, newDef = 0x0, snapshots = 0x0, current_snapshot = 0x0, hasManagedSave = false, privateData = 0x0, privateDataFreeFunc = 0x0, taint = 304}
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

In the qemuProcessReconnectHelper() a new thread that does all the
interesting work is spawned. The rationale is to not block the daemon
startup process in case of unresponsive qemu. However, the thread
handler is a local variable which gets lost once the control goes out of
scope. Hence the thread gets leaked. We can avoid this if the thread
isn't made joinable.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>