* src/qemu/qemu_driver.c (add function qemuDomainIsUpdated)

* src/driver.h (new typedef, new callback member for "_virDriver")
* src/esx/esx_driver.c
* src/lxc/lxc_driver.c
* src/opennebula/one_driver.c
* src/openvz/openvz_driver.c
* src/phyp/phyp_driver.c
* src/qemu/qemu_driver.c
* src/remote/remote_driver.c
* src/test/test_driver.c
* src/uml/uml_driver.c
* src/vbox/vbox_tmpl.c
* src/xen/xen_driver.c
* src/xenapi/xenapi_driver.c

When running non-root, the QEMU log file is usually opened with
truncation, since there is no logrotate for non-root usage.
This means that when libvirt logs the shutdown timestamp, the
log is accidentally truncated

* src/qemu/qemu_driver.c: Never truncate log file with shutdown
  message

Currently changes to the persistent config aren't flushed to disk, meaning
they are lost if the domain is redefined or libvirtd is restarted.

Do this by adding a helper function to get the persistent domain config. This
should be useful for other functions that may eventually want to alter
the persistent domain config (attach/detach device). Also make similar changes
to the test drivers setvcpus command.

A caveat is that the function will return the running config for a transient
domain, rather than error. This simplifies callers, as long as they use
other methods to ensure the guest is persistent.

Doing 'virsh setvcpus $vm --config 10' doesn't check the value against the
domains maxvcpus value. A larger value for example will prevent the guest
from starting.

Also make a similar change to the test driver.

The current semantics of non-persistent hotplug/update are confusing: the
changes will persist as long as the in memory domain definition isn't
overwritten. This means hotplug changes stay around until the domain is
redefined or libvirtd is restarted.

Call virDomainObjSetDefTransient at VM startup, so that we properly discard
hotplug changes when the VM is shutdown.

* bootstrap.conf (gnulib_modules): Add configmake.
* daemon/Makefile.am (libvirtd_CFLAGS): Drop defines provided by
gnulib.
* src/Makefile.am (INCLUDES): Likewise.
* tests/Makefile.am (INCLUDES): Likewise.
* tools/Makefile.am (virsh_CFLAGS): Likewise.
* daemon/libvirtd.c (qemudInitPaths, usage, main): Update
clients.
* src/cpu/cpu_map.c (CPUMAPFILE): Likewise.
* src/driver.c (DEFAULT_DRIVER_DIR): Likewise.
* src/internal.h (_): Likewise.
* src/libvirt.c (virInitialize): Likewise.
* src/lxc/lxc_conf.h (LXC_CONFIG_DIR, LXC_STATE_DIR, LXC_LOG_DIR):
Likewise.
* src/lxc/lxc_conf.c (lxcCapsInit, lxcLoadDriverConfig):
Likewise.
* src/network/bridge_driver.c (NETWORK_PID_DIR)
(NETWORK_STATE_DIR, DNSMASQ_STATE_DIR, networkStartup): Likewise.
* src/nwfilter/nwfilter_driver.c (nwfilterDriverStartup):
Likewise.
* src/qemu/qemu_conf.c (qemudLoadDriverConfig): Likewise.
* src/qemu/qemu_driver.c (qemudStartup): Likewise.
* src/remote/remote_driver.h (LIBVIRTD_PRIV_UNIX_SOCKET)
(LIBVIRTD_PRIV_UNIX_SOCKET_RO, LIBVIRTD_CONFIGURATION_FILE)
(LIBVIRT_PKI_DIR): Likewise.
* src/secret/secret_driver.c (secretDriverStartup): Likewise.
* src/security/security_apparmor.c (VIRT_AA_HELPER): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/storage_backend_disk.c (PARTHELPER): Likewise.
* src/storage/storage_driver.c (storageDriverStartup): Likewise.
* src/uml/uml_driver.c (TEMPDIR, umlStartup): Likewise.
* src/util/hooks.c (LIBVIRT_HOOK_DIR): Likewise.
* tools/virsh.c (main): Likewise.
* docs/hooks.html.in: Likewise.

Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().

Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()<  0 check and I converted those to
VIR_FCLOSE()<  0.

I did not find occurrences of possible double-closed files on the way.

Currently only support domain start and shutdown, for domain start,
record timestamp before the qemu command line, and for domain shutdown,
just say it's shutting down with timestamp.

* src/qemu/qemu_driver.c (qemudStartVMDaemon, qemudShutdownVMDaemon
  introduced two macros - START_POSTFIX, SHUTDOWN_POSTFIX)

This provides an implementation of the virDomainOpenConsole
API with the QEMU driver. For the streams code, this reuses
most of the code previously added for the tunnelled migration
streams since it is generic.

* src/qemu/qemu_driver.c: Support virDomainOpenConsole

To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback

The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O

* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
  VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
  generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
  src/libvirt_private.syms: Generic reusable FD based streams

To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.

* src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in, src/driver.h: Define the
  new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
  API entry point

QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.

This has been requested for RHEV:

https://bugzilla.redhat.com/show_bug.cgi?id=626305

v2: Change flag name, bool cleanups

Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.

This extends the XML syntax for <graphics> to allow a password
expiry time to be set

eg

  <graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>

The timestamp is in UTC.

* src/conf/domain_conf.h: Pull passwd out into separate struct
  virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
* src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
  argument
* src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
  src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
  struct containing VNC password

In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address

* src/qemu/qemu.conf: Add spice_listen, spice_tls,
  spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
  spice config parameters and updating -spice arg generation
  to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
  tests/qemuxml2argvtest.c: Expand test case to cover driver
  level configuration

* src/qemu/qemu_driver.c: Allocate the TCP ports for SPICE
  before starting guest

Read and store the data when initializing the driver.

Commit 06f81c63 attempted to make
QEMU driver ignore the failure to relabel 'stdin_path' if it was
on NFS. The actual result was that it ignores *all* failures to
label any aspect of the VM, unless stdin_path is non-NULL and
is not on NFS.

* src/qemu/qemu_driver.c: Treat all relabel failures as terminal

Make sure that the QEmu process within the cgroup can access the device
file for the USB device that has to be connected to the virtual domain.

Add dump_image_format[] to qemu.conf and support compressed dump
at virsh dump. coredump compression is important for saving disk space
in an environment where multiple guests run.

In general, "disk space for dump" is specially allocated and will be
a dead space in the system. It's used only at emergency. So, it's better
to have both of save_image_format and dump_image_format. "save" is done
in scheduled manner with enough calculated disk space for it.

This code reuses some of save_image_format[] and supports the same format.

Changelog:
 - modified libvirtd_qemu.aug
 - modified test_libvirtd_qemu.aug
 - fixed error handling of qemudSaveCompressionTypeFromString()

When we mount any cgroup without "-o devices", we will fail to start vms:

error: Failed to start domain vm1
error: Unable to deny all devices for vm1: No such file or directory

When we mount any cgroup without "-o cpu", we will fail to get schedinfo:
Scheduler      : posix
error: unable to get cpu shares tunable: No such file or directory

We should only use the cgroup controllers which are mounted on host.
So I add virCgroupMounted() for qemuCgroupControllerActive()
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>

https://bugzilla.redhat.com/show_bug.cgi?id=638285 - when migrating
a guest, it was very easy to provoke a race where an application
could query block information on a VM that had just been migrated
away.  Any time qemu code obtains a job lock, it must also check
that the VM was not taken down in the time where it was waiting
for the lock.

* src/qemu/qemu_driver.c (qemudDomainSetMemory)
(qemudDomainGetInfo, qemuDomainGetBlockInfo): Check that vm still
exists after obtaining job lock, before starting monitor action.

Add auditing of all initial disk/net assignments to QEMU guests
at startup. Add auditing for all hotplug & unplug events and
disk media changes.

* src/qemu/qemu_driver.c: Add disk/net resource auditing

Add auditing of the allocated security label in the QEMU driver
VM startup code

* src/qemu/qemu_driver.c: Audit security label

Add audit hooks to report all start and stop events on QEMU
guest domains.

* src/qemu/qemu_driver.c: Audit start/stop events

Revert most of commit a8b5f9bd.
The audit hooks will be re-added directly in the QEMU driver code
in a future commit

* daemon/remote.c: Remove all audit logging hooks
* src/qemu/qemu_driver.c: Remove all audit logging hooks

There is no point in trying to fill params beyond the first error,
because when qemuDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.

To get them under the common VIR_DOMAIN_MEMORY_* prefix.

Most operations are audited at the libvirtd level; auditing in
src/libvirt.c would result in two audit entries per operation (one in
the client, one in libvirtd).

The only exception is a domain stopping of its own will (e.g. because
the user clicks on "shutdown" inside the interface).  There can often be
no client connected at the time the domain stops, so libvirtd does not
have any virConnectPtr object on which to attach an event watch.  This
patch therefore adds auditing directly inside the qemu driver (other
drivers are not supported).

* src/qemu/qemu_driver.c (qemudDomainSetVcpusFlags)
(qemudDomainGetVcpusFlags): Support all feasible flag
combinations.

Although this patch adds a distinction between maximum vcpus and
current vcpus in the XML, the values should be identical for all
drivers at this point.  Only in subsequent per-driver patches will
a distinction be made.

In general, virDomainGetInfo should prefer the current vcpus.

* src/conf/domain_conf.h (_virDomainDef): Adjust vcpus to unsigned
short, to match virDomainGetInfo limit.  Add maxvcpus member.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefFormat): parse and print out vcpu details.
* src/xen/xend_internal.c (xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Manage both vcpu numbers, and require them
to be equal for now.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
* src/phyp/phyp_driver.c (phypDomainDumpXML): Likewise.
* src/openvz/openvz_conf.c (openvzLoadDomains): Likewise.
* src/openvz/openvz_driver.c (openvzDomainDefineXML)
(openvzDomainCreateXML, openvzDomainSetVcpusInternal): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDumpXML, vboxDomainDefineXML):
Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/esx/esx_vmx.c (esxVMX_ParseConfig, esxVMX_FormatConfig):
Likewise.
* src/qemu/qemu_conf.c (qemuBuildSmpArgStr)
(qemuParseCommandLineSmp, qemuParseCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemudDomainHotplugVcpus): Likewise.
* src/opennebula/one_conf.c (xmlOneTemplate): Likewise.

Note - this wrapping is completely mechanical; the old API will
function identically, since the new API validates that the exact
same flags are provided by the old API.  On a per-driver basis,
it may make sense to have the old API pass a different set of flags,
but that should be done in the per-driver patch that implements
the full range of flag support in the new API.

* src/esx/esx_driver.c (esxDomainSetVcpus, escDomainGetMaxVpcus):
Move guts...
(esxDomainSetVcpusFlags, esxDomainGetVcpusFlags): ...to new
functions.
(esxDriver): Trivially support the new API.
* src/openvz/openvz_driver.c (openvzDomainSetVcpus)
(openvzDomainSetVcpusFlags, openvzDomainGetMaxVcpus)
(openvzDomainGetVcpusFlags, openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDomainSetCPU)
(phypDomainSetVcpusFlags, phypGetLparCPUMAX)
(phypDomainGetVcpusFlags, phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemudDomainSetVcpus)
(qemudDomainSetVcpusFlags, qemudDomainGetMaxVcpus)
(qemudDomainGetVcpusFlags, qemuDriver): Likewise.
* src/test/test_driver.c (testSetVcpus, testDomainSetVcpusFlags)
(testDomainGetMaxVcpus, testDomainGetVcpusFlags, testDriver):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainSetVcpus)
(vboxDomainSetVcpusFlags, virDomainGetMaxVcpus)
(virDomainGetVcpusFlags, virDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainSetVcpus)
(xenUnifiedDomainSetVcpusFlags, xenUnifiedDomainGetMaxVcpus)
(xenUnifiedDomainGetVcpusFlags, xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainSetVcpus)
(xenapiDomainSetVcpusFlags, xenapiDomainGetMaxVcpus)
(xenapiDomainGetVcpusFlags, xenapiDriver): Likewise.
(xenapiError): New helper macro.

* src/driver.h (virDrvDomainSetVcpusFlags)
(virDrvDomainGetVcpusFlags): New typedefs.
(_virDriver): New callback members.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.

Over root-squashing nfs, when virFileOperation() is called as uid==0,
it may fail with EACCES, but also with EPERM, due to
virFileOperationNoFork()'s failed attemp to chown a writable file.

qemudDomainSaveFlag() should expect this case, too.

qemudOpenAsUID is intended to open a file with the credentials of a
specified uid. Current implementation fails if the file is accessible to
one of uid's groups but not owned by uid.

This patch replaces the supplementary group list that the child process
inherited from libvirtd with the default group list of uid.