Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Tested-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

We don't allow such config in the schema but the code can handle that so
add a test case supporting it.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This commit adds resolution element with parameters 'x' and 'y' into video
XML domain group definition. Both, properties were added into an element
called 'resolution' and it was added inside 'model' element. They are set
as optional. This element does not follow QEMU properties 'xres' and
'yres' format. Both HTML documentation and schema were changed too. This
commit includes a simple test case to cover resolution for QEMU video
models. The new XML format for resolution looks like:

    <model ...>
      <resolution x='800' y='600'/>
    </model>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>

This patch adds the implementation of the ccf-assist pSeries
feature, based on the QEMU_CAPS_MACHINE_PSERIES_CAP_CCF_ASSIST
capability that was added in the previous patch.
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Although <interface type='ethernet'> has always been able to use an
existing tap device, this is just a coincidence due to the fact that
the same ioctl is used to create a new tap device or get a handle to
an existing device.

Even then, once we have the handle to the device, we still insist on
doing extra setup to it (setting the MAC address and IFF_UP).  That
*might* be okay if libvirtd is running as a privileged process, but if
libvirtd is running as an unprivileged user, those attempted
modifications to the tap device will fail (yes, even if the tap is set
to be owned by the user running libvirtd). We could avoid this if we
knew that the device already existed, but as stated above, an existing
device and new device are both accessed in the same manner, and
anyway, we need to preserve existing behavior for those who are
already using pre-existing devices with privileged libvirtd (and
allowing/expecting libvirt to configure the pre-existing device).

In order to cleanly support the idea of using a pre-existing and
pre-configured tap device, this patch introduces a new optional
attribute "managed" for the interface <target> element. This
attribute is only valid for <interface type='ethernet'> (since all
other interface types have mandatory config that doesn't apply in the
case where we expect the tap device to be setup before we
get it). The syntax would look something like this:

   <interface type='ethernet'>
      <target dev='mytap0' managed='no'/>
      ...
   </interface>

This patch just adds managed to the grammar and parser for <target>,
but has no functionality behind it.

(NB: when managed='no' (the default when not specified is 'yes'), the
target dev is always a name explicitly provided, so we don't
auto-remove it from the config just because it starts with "vnet"
(VIR_NET_GENERATED_TAP_PREFIX); this makes it possible to use the
same pattern of names that libvirt itself uses when it automatically
creates the tap devices.)
Signed-off-by: NLaine Stump <laine@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

There are already good number of test cases with hostdevices,
few have multifunction devices but none having more than one
than one multifunction cards.

This patch adds a case where there are two multifunction cards
and two Virtual functions part of the same XML.

0001:01:00.X & 0005:09:00.X - are Multifunction PCI cards.
0000:06:12.[5|6] - are SRIOV Virtual functions

Future commits will improve on automatically detecting the
multifunction cards and auto-assinging the addresses
appropriately.
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NShivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>

Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Reviewed-by: NMarc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: NBjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: NBoris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

There is an inconsistency with VIR_TEST_DEBUG() calls. One half
(roughly) of calls does have the newline character the other one
doesn't. Well, it doesn't have it because it assumed blindly that
new line will be printed, which is not the case.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

In preparation libtool "-module" flag removal, add lib prefix to all
mock shared objects.

While at it, introduce VIR_TEST_MOCK macros that makes path out of mock
name to be used with VIR_TEST_PRELOAD or VIR_TEST_MAIN_PRELOAD.  That,
hopefully, improves readability, reduces line length and allows to
tailor VIR_TEST_MOCK for specific platform if it has shared library
suffix different from ".so".
Signed-off-by: NRoman Bolshakov <r.bolshakov@yadro.com>

In preparation to moving the validation to the parser,
we need to supply the correct caps.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

QEMU-4.1 supports 'Direct Mode' for Hyper-V synthetic timers
(hv-stimer-direct CPU flag): Windows guests can request that timer
expiration notifications are delivered as normal interrupts (and not
VMBus messages). This is used by Hyper-V on KVM.
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

If /etc/qemu/firmware directory exists, but is not readable then
qemuxml2xmltest fails. This is because once domain XML is parsed
it is validated. For that domain capabilities are needed.
However, when constructing domain capabilities, FW descriptors
are loaded and this is the point where the test fails, because it
fails to open one of the directories.

Fixes: 5b9819ee domain capabilities: Expose firmware auto selection feature
Signed-off-by: NDaniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Add a test case for the TPM XML encryption parser and formatter.
Signed-off-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Add an already existing test case tpm-emulator-tpm2 to qemuxml2xmltest.c
Signed-off-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

It mirrors the existing DO_TEST_CAPS_ARCH_LATEST_FULL(), and is
now used to implement DO_TEST_CAPS_ARCH_VER().
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Make sure the order is consistent between xml2argv and xml2xml,
and make room for more macros that are going to be introduced
shortly.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We didn't do this earlier because the DO_TEST_CAPS_ARCH_LATEST()
macro was limited to qemuxml2argv until recently.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

SMMUv3 is an IOMMU implementation for ARM virt guests.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We can drop the intel-iommu-machine test case while doing so,
since it is supposed to showcase how we generate different
command lines for older QEMU versions and we can do that
using a single input file now.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Examples of passing unknown strings through <interface>
<model type=X/>
Acked-by: NMichal Privoznik <mprivozn@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Demostrate DO_TEST_CAPS_ARCH_LATEST by converting the test case
'aarch64-os-firmware-efi'
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Convert these test cases to use DO_TEST_CAPS_LATEST

* genid
* genid-auto

This ensures the test infrastructure is working as expected for
a test case with explicit -active and -inactive XML test data
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Convert these test cases to use DO_TEST_CAPS_LATEST

* os-firmware-bios
* os-firmware-efi
* os-firmware-efi-secboot
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Convert these test cases to use DO_TEST_CAPS_LATEST

* virtio-transitional
* virtio-non-transitional
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Add DO_TEST_CAPS* macros, lifted from qemuxml2argvtest.
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Use the same pattern that is used in qemuxml2argvtest, setting the
name in a static testQemuInfo instance inside the test macros
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Make all users of GIC_X use ARG_GIC explicitly, and drop the
required gic parameter from DO_TEST_FULL
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

No functional change, just replacing the old custom infrastructure
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

The qemuxml2xml testInfo is now just a subset of testQemuInfo, so it's
a drop in replacement
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Reuse info->outfile for it. This requires us to set paths before
each virTestRun invocation
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

Just renamed from existing inName and outActiveName
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

These will need to be separate to share testInfo with qemuxml2argv
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>
Signed-off-by: NCole Robinson <crobinso@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1693066

Up until memfd introduction (in 24b74d18) we did not need to
know @pagesize because qemuGetDomainHupageMemPath() could deal
with it being zero (value of zero means use the default hugetlbfs
mount). But since for memfd we are not passing a path to
hugetlbfs mount rather the page size value we need to know its
value upfront.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Somehow, these were not tested. Use symlinks to point expected
output back to the input. This way we can also fix some
discrepancies in the input XMLs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The current location looks very arbitrary. Move it to the end of
the mymain() function so it is less confusing.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Block job related data will be stored in a has table and formatted into
the status XML. Use the mock to guarantee stable tests.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1564270

Now that everything is prepared for qemu driver we can enable
parser feature to allow users define such domains.

At the same time, introduce bunch of tests to test the feature.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>