This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

This patch updates the key "security_driver" in QEMU config to suport
both a sigle default driver or a list of default drivers. This ensures
that it will remain compatible with older versions of the config file.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

These changes make the security drivers able to find and handle the
correct security label information when more than one label is
available. They also update the DAC driver to be used as an usual
security driver.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

This patch updates the structures that store information about each
domain and each hypervisor to support multiple security labels and
drivers. It also updates all the remaining code to use the new fields.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

For network devices allocated from a network with <forward
mode='hostdev'>, there is a need to add the newly minted hostdev to
the hostdevs array.

In this case we also need to call qemuPrepareHostDevices just for this
one device, as the standard call to initialize all the hostdevs that
were defined directly in the domain's configuration has already been
made by the time we allocate a device from a libvirt network, and thus
have something that needs initializing.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c

Refactoring existing code without causing any functional changes to
prepare for new code.

This patch makes the code reusable.
Signed-off-by: NShradha Shah <sshah@solarflare.com>

Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

Setting hard_limit larger than previous swap_hard_limit must fail,
it's not that good if one wants to change the swap_hard_limit
and hard_limit together. E.g.

% virsh memtune rhel6
hard_limit     : 1000000
soft_limit     : 1000000
swap_hard_limit: 1000000

% virsh memtune rhel6 --hard-limit 1000020 --soft-limit 1000020 \
--swap-hard-limit 1000020 --live

This patch reorder the limits setting to set the swap_hard_limit
first, hard_limit then, and soft_limit last if it's greater than
current swap_hard_limit. And soft_limit first, hard_limit then,
swap_hard_limit last, if not.

The underlying function to set the vlan tag of an SR-IOV network
device was already in place (although an extra patch to save/restore
the original vlan tag was needed), and recent patches added the
ability to configure a vlan tag. This patch just ties those two
together.

An SR-IOV device doesn't support vlan trunking, so if anyone tries to
configure more than a single tag, or set the trunk flag, and error is
logged.

The parameter value for cpuset could be in special format like
"0-10,^7", which is not recognized by cgroup. This patch is to
ensure the cpuset is formatted as expected before passing it to
cgroup. As a side effect, after the patch, it parses the cpuset
early before cgroup setting, to avoid the rollback if cpuset
parsing fails afterwards.

While the QEMU monitor/agent do not want JSON strings pretty
printed, other parts of libvirt might. Instead of hardcoding
QEMU's desired behaviour in virJSONValueToString(), add a
boolean flag to control pretty printing
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The qemuProcessAutoDestroyRun function was removed in an earlier
commit, but the header file declaration was not deleted

virtPortProfile is now used by 4 different types of network devices
(NETWORK, BRIDGE, DIRECT, and HOSTDEV), and it's getting cumbersome to
replicate so much code in 4 different places just because each type
has the virtPortProfile in a slightly different place. This patch puts
a single virtPortProfile in a common place (outside the type-specific
union) in both virDomainNetDef and virDomainActualNetDef, and adjusts
the parse and format code (and the few other places where it is used)
accordingly.

Note that when a <virtualport> element is found, the parse functions
verify that the interface is of a type that supports one, otherwise an
error is generated (CONFIG_UNSUPPORTED in the case of <interface>, and
INTERNAL in the case of <actual>, since the contents of <actual> are
always generated by libvirt itself).

As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].

* src/Makefile.am:
  - Various indention fixes incidentally
  - Add macro DATATYPES_SOURCES (datatypes.[ch])
  - Link datatypes.[ch] for libvirt_lxc

* src/conf/domain_conf.c:
  - Move all the stuffs from virdomainlist.c into it
  - Use virUnrefDomain and virUnrefDomainSnapshot instead of
    virDomainFree and virDomainSnapshotFree, which are defined
    in libvirt.c, and we don't want to link to it.
  - Remove "if" before "free" the object, as virObjectUnref
    is in the list "useless_free_options".

* src/conf/domain_conf.h:
  - Move all the stuffs from virdomainlist.h into it
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/

* src/libxl/libxl_driver.c:
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/
  - no (include "virdomainlist.h")

* src/libxl/libxl_driver.c: Likewise

* src/lxc/lxc_driver.c: Likewise

* src/openvz/openvz_driver.c: Likewise

* src/parallels/parallels_driver.c: Likewise

* src/qemu/qemu_driver.c: Likewise

* src/test/test_driver.c: Likewise

* src/uml/uml_driver.c: Likewise

* src/vbox/vbox_tmpl.c: Likewise

* src/vmware/vmware_driver.c: Likewise

* tools/virsh-domain-monitor.c: Likewise

* tools/virsh.c: Likewise

This patch introduces a new error code VIR_ERR_OPERATION_UNSUPPORTED to
mark error messages regarding operations that failed due to lack of
support on the hypervisor or other than libvirt issues.

The code is first used in reporting error if qemu does not support block
IO tuning variables yielding error message:
error: Unable to get block I/O throttle parameters
error: Operation not supported: block_io_throttle field
'total_bytes_sec' missing in qemu's output

instead of:
error: Unable to get block I/O throttle parameters
error: internal error cannot read total_bytes_sec

The meat of this patch is just moving the calls to
virNWFilterRegisterCallbackDriver from each hypervisor's "register"
function into its "initialize" function. The rest is just code
movement to allow that, and a new virNWFilterUnRegisterCallbackDriver
function to undo what the register function does.

The long explanation:

There is an array in nwfilter called callbackDrvArray that has
pointers to a table of functions for each hypervisor driver that are
called by nwfilter. One of those function pointers is to a function
that will lock the hypervisor driver. Entries are added to the table
by calling each driver's "register" function, which happens quite
early in libvirtd's startup.

Sometime later, each driver's "initialize" function is called. This
function allocates a driver object and stores a pointer to it in a
static variable that was previously initialized to NULL. (and here's
the important part...) If the "initialize" function fails, the driver
object is freed, and that pointer set back to NULL (but the entry in
nwfilter's callbackDrvArray is still there).

When the "lock the driver" function mentioned above is called, it
assumes that the driver was successfully loaded, so it blindly tries
to call virMutexLock on "driver->lock".

BUT, if the initialize never happened, or if it failed, "driver" is
NULL. And it just happens that "lock" is always the first field in
driver so it is also NULL.

Boom.

To fix this, the call to virNWFilterRegisterCallbackDriver for each
driver shouldn't be called until the end of its (*already guaranteed
successful*) "initialize" function, not during its "register" function
(which is currently the case). This implies that there should also be
a virNWFilterUnregisterCallbackDriver() function that is called in a
driver's "shutdown" function (although in practice, that function is
currently never called).

When entering "confirm" phase, we are interested in the value of
cancelled rather then ret variable which was interesting before "finish"
phase and didn't change since then.

Previously, qemu did not respond to monitor commands during migration if
the limit was too high. This prevented us from raising the limit
earlier. The qemu issue seems to be fixed (according to my testing) and
we may remove the 32Mb/s limit.

This patch refactors the JSON parsing function that extracts the block
IO tuning parameters from qemu's output. The most impacting change
concerns the error message that is returned if the reply from qemu does
not contain the needed data. The data for IO parameter tuning were added
in qemu 1.1 and the previous error message was confusing.

This patch also breaks long lines and extracts a multiple time used code
pattern to a macro.

Rename qemuDefaultScsiControllerModel to qemuCheckScsiControllerModel.
When scsi model is given explicitly in XML(model > 0) checking if the
underlying QEMU supports it or not first, raise an error on checking
failure.
When the model is not given(mode <= 0), return LSI by default, if
the QEMU doesn't support it, raise an error.

  QEMU_CAPS_SCSI_LSI
    set the flag when "lsi53c895a", bus PCI, alias "lsi" in
    the output of "qemu -device ?"
    -device lsi in qemu command line

  QEMU_CAPS_VIRTIO_SCSI_PCI
    set the flag when "name "virtio-scsi-pci", bus PCI" in
    the output of qemu devices query.
    -device virtio-scsi-pci in qemu command line

Make virSocket use the virObject APIs for reference counting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Make qemuAgentPtr and qemuMonitorPtr types use the virObject APIs
for reference counting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This converts the following public API datatypes to use the
virObject infrastructure:

  virConnectPtr
  virDomainPtr
  virDomainSnapshotPtr
  virInterfacePtr
  virNetworkPtr
  virNodeDevicePtr
  virNWFilterPtr
  virSecretPtr
  virStreamPtr
  virStorageVolPtr
  virStoragePoolPtr

The code is significantly simplified, since the mutex in the
virConnectPtr object now only needs to be held when accessing
the per-connection virError object instance. All other operations
are completely lock free.

* src/datatypes.c, src/datatypes.h, src/libvirt.c: Convert
  public datatypes to use virObject
* src/conf/domain_event.c, src/phyp/phyp_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/storage/storage_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xend_internal.c,
  tests/qemuxml2argvtest.c, tests/qemuxmlnstest.c,
  tests/sexpr2xmltest.c, tests/xmconfigtest.c: Convert
  to use virObjectUnref/virObjectRef
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This patch adds the support to run the QEMU network helper
under unprivileged user. It also adds the support for
attach-interface option in virsh to run under unprivileged
user.
Signed-off-by: NRicha Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>

This patch adds the capability in libvirt to check if
-netdev bridge option is supported or not.
Signed-off-by: NRicha Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant<coreyb@linux.vnet.ibm.com>

If there's a memory leak in qemu or qemu is exploited the host's
system will sooner or later start trashing instead of killing
the bad process. This however has impact on performance and other
guests as well. Therefore we should set a reasonable RSS limit
even when user hasn't set any. It's better to be secure by default.

* src/conf/domain_conf.c:
  - Add virDomainControllerFind to find controller device by type
    and index.
  - Add virDomainControllerRemove to remove the controller device
    from maintained controler list.

* src/conf/domain_conf.h:
  - Declare the two new helpers.

* src/libvirt_private.syms:
  - Expose private symbols for the two new helpers.

* src/qemu/qemu_driver.c:
  - Support attach/detach controller device persistently

* src/qemu/qemu_hotplug.c:
  - Use the two helpers to simplify the codes.

One of our latest commits fbe87126 introduced this nasty typo:
func(vmdef, ...); where func() dereference vmdef->ncontrollers,
and vmdef was initialized to NULL. This leaves us with unconditional
immediate segfault. It should be vm->def instead.

This patch enables the "none" USB controller for qemu guests and adds
valdiation on hot-plugged devices if the guest has USB disabled.

This patch also adds a set of tests to check parsing of domain XMLs that
use the "none" controller and some forbidden situations concerning it.

Libvirt adds a USB controller to the guest even if the user does not
specify any in the XML. This is due to back-compat reasons.

To allow disabling USB for a guest this patch adds a new USB controller
type "none" that disables USB support for the guest.

Pushed without ack, under the trivial rule.

Detected by Coverity.

* src/qemu/qemu_hotplug.c (qemuDomainAttachHostDevice): Avoid
double free of usb on failure.

Any time we have a string with no % passed through gettext, a
translator can inject a % to cause a stack overread.  When there
is nothing to format, it's easier to ask for a string that cannot
be used as a formatter, by using a trivial "%s" format instead.

In the past, we have used --disable-nls to catch some of the
offenders, but that doesn't get run very often, and many more
uses have crept in.  Syntax check to the rescue!

The syntax check can catch uses such as
virReportError(code,
               _("split "
                 "string"));
by using a sed script to fold context lines into one pattern
space before checking for a string without %.

This patch is just mechanical insertion of %s; there are probably
several messages touched by this patch where we would be better
off giving the user more information than a fixed string.

* cfg.mk (sc_prohibit_diagnostic_without_format): New rule.
* src/datatypes.c (virUnrefConnect, virGetDomain)
(virUnrefDomain, virGetNetwork, virUnrefNetwork, virGetInterface)
(virUnrefInterface, virGetStoragePool, virUnrefStoragePool)
(virGetStorageVol, virUnrefStorageVol, virGetNodeDevice)
(virGetSecret, virUnrefSecret, virGetNWFilter, virUnrefNWFilter)
(virGetDomainSnapshot, virUnrefDomainSnapshot): Add %s wrapper.
* src/lxc/lxc_driver.c (lxcDomainSetBlkioParameters)
(lxcDomainGetBlkioParameters): Likewise.
* src/conf/domain_conf.c (virSecurityDeviceLabelDefParseXML)
(virDomainDiskDefParseXML, virDomainGraphicsDefParseXML):
Likewise.
* src/conf/network_conf.c (virNetworkDNSHostsDefParseXML)
(virNetworkDefParseXML): Likewise.
* src/conf/nwfilter_conf.c (virNWFilterIsValidChainName):
Likewise.
* src/conf/nwfilter_params.c (virNWFilterVarValueCreateSimple)
(virNWFilterVarAccessParse): Likewise.
* src/libvirt.c (virDomainSave, virDomainSaveFlags)
(virDomainRestore, virDomainRestoreFlags)
(virDomainSaveImageGetXMLDesc, virDomainSaveImageDefineXML)
(virDomainCoreDump, virDomainGetXMLDesc)
(virDomainMigrateVersion1, virDomainMigrateVersion2)
(virDomainMigrateVersion3, virDomainMigrate, virDomainMigrate2)
(virStreamSendAll, virStreamRecvAll)
(virDomainSnapshotGetXMLDesc): Likewise.
* src/nwfilter/nwfilter_dhcpsnoop.c (virNWFilterSnoopReqLeaseDel)
(virNWFilterDHCPSnoopReq): Likewise.
* src/openvz/openvz_driver.c (openvzUpdateDevice): Likewise.
* src/openvz/openvz_util.c (openvzKBPerPages): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Likewise.
* src/qemu/qemu_command.c (qemuBuildHubDevStr, qemuBuildChrChardevStr)
(qemuBuildCommandLine): Likewise.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/rpc/virnetsaslcontext.c (virNetSASLSessionGetIdentity):
Likewise.
* src/rpc/virnetsocket.c (virNetSocketNewConnectUNIX)
(virNetSocketSendFD, virNetSocketRecvFD): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskBuildPool): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemProbe)
(virStorageBackendFileSystemBuild): Likewise.
* src/storage/storage_backend_rbd.c
(virStorageBackendRBDOpenRADOSConn): Likewise.
* src/storage/storage_driver.c (storageVolumeResize): Likewise.
* src/test/test_driver.c (testInterfaceChangeBegin)
(testInterfaceChangeCommit, testInterfaceChangeRollback):
Likewise.
* src/vbox/vbox_tmpl.c (vboxListAllDomains): Likewise.
* src/xenxs/xen_sxpr.c (xenFormatSxprDisk, xenFormatSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetUUID, xenFormatXMDisk)
(xenFormatXM): Likewise.

This patch cleans up coding style breaks some long lines and fixes error
message spelling on various places in domain_conf.c and in the qemu
driver.

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

The previous check for YAJL would have many undesirable
consequences, the most important being that it caused the
capabilities XML to lose all <guest> elements. There is
no user visible feedback as to what is wrong in this respect,
merely a syslog message. The empty capabilities causes
libvirtd to then throw away all guest XML configs that are
stored.

This changes the code so that the check for YAJL is only
performed at the time we attempt to spawn a QEMU process

error: Failed to start domain vm-vnc
error: unsupported configuration: this qemu binary requires libvirt to be compiled with yajl
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the QEMU driver to use virReportError instead of
the qemuReportError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>