提交 7d2b91b8 编写于 作者: K Kyle Mestery 提交者: Laine Stump

network: add support for setting VLANs on Open vSwitch ports

Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>
上级 01aa172c
......@@ -325,7 +325,7 @@ static int virLXCProcessSetupInterfaceBridged(virConnectPtr conn,
if (vport && vport->virtPortType == VIR_NETDEV_VPORT_PROFILE_OPENVSWITCH)
ret = virNetDevOpenvswitchAddPort(brname, parentVeth, &net->mac,
vm->uuid, vport);
vm->uuid, vport, &net->vlan);
else
ret = virNetDevBridgeAddPort(brname, parentVeth);
if (ret < 0)
......
......@@ -1763,7 +1763,7 @@ networkStartNetworkVirtual(struct network_driver *driver,
}
if (virNetDevTapCreateInBridgePort(network->def->bridge,
&macTapIfName, &network->def->mac,
NULL, NULL, NULL,
NULL, NULL, NULL, NULL,
VIR_NETDEV_TAP_CREATE_USE_MAC_FOR_BRIDGE) < 0) {
VIR_FREE(macTapIfName);
goto err0;
......
......@@ -255,6 +255,7 @@ qemuNetworkIfaceConnect(virDomainDefPtr def,
err = virNetDevTapCreateInBridgePort(brname, &net->ifname, &net->mac,
def->uuid, &tapfd,
virDomainNetGetActualVirtPortProfile(net),
&net->vlan,
tap_create_flags);
virDomainAuditNetDevice(def, net, "/dev/net/tun", tapfd >= 0);
if (err < 0) {
......
......@@ -141,6 +141,7 @@ umlConnectTapDevice(virConnectPtr conn,
if (virNetDevTapCreateInBridgePort(bridge, &net->ifname, &net->mac,
vm->uuid, NULL,
virDomainNetGetActualVirtPortProfile(net),
&net->vlan,
VIR_NETDEV_TAP_CREATE_IFUP) < 0) {
if (template_ifname)
VIR_FREE(net->ifname);
......
......@@ -46,9 +46,11 @@
int virNetDevOpenvswitchAddPort(const char *brname, const char *ifname,
const virMacAddrPtr macaddr,
const unsigned char *vmuuid,
virNetDevVPortProfilePtr ovsport)
virNetDevVPortProfilePtr ovsport,
virNetDevVlanPtr virtVlan)
{
int ret = -1;
int i = 0;
virCommandPtr cmd = NULL;
char macaddrstr[VIR_MAC_STRING_BUFLEN];
char ifuuidstr[VIR_UUID_STRING_BUFLEN];
......@@ -57,6 +59,7 @@ int virNetDevOpenvswitchAddPort(const char *brname, const char *ifname,
char *ifaceid_ex_id = NULL;
char *profile_ex_id = NULL;
char *vmid_ex_id = NULL;
virBufferPtr buf;
virMacAddrFormat(macaddr, macaddrstr);
virUUIDFormat(ovsport->interfaceID, ifuuidstr);
......@@ -76,11 +79,35 @@ int virNetDevOpenvswitchAddPort(const char *brname, const char *ifname,
ovsport->profileID) < 0)
goto out_of_memory;
}
if (virtVlan) {
if (VIR_ALLOC(buf) < 0)
goto out_of_memory;
/* Trunk port first */
if (virtVlan->trunk) {
virBufferAddLit(buf, "trunk=");
/*
* Trunk ports have at least one VLAN. Do the first one
* outside the "for" loop so we can put a "," at the
* start of the for loop if there are more than one VLANs
* on this trunk port.
*/
virBufferAsprintf(buf, "%d", virtVlan->tag[i]);
for (i = 1; i < virtVlan->nTags; i++) {
virBufferAddLit(buf, ",");
virBufferAsprintf(buf, "%d", virtVlan->tag[i]);
}
} else {
virBufferAsprintf(buf, "tag=%d", virtVlan->tag[0]);
}
}
cmd = virCommandNew(OVSVSCTL);
if (ovsport->profileID[0] == '\0') {
virCommandAddArgList(cmd, "--", "--may-exist", "add-port",
brname, ifname,
brname, ifname, virBufferContentAndReset(buf),
"--", "set", "Interface", ifname, attachedmac_ex_id,
"--", "set", "Interface", ifname, ifaceid_ex_id,
"--", "set", "Interface", ifname, vmid_ex_id,
......@@ -89,7 +116,7 @@ int virNetDevOpenvswitchAddPort(const char *brname, const char *ifname,
NULL);
} else {
virCommandAddArgList(cmd, "--", "--may-exist", "add-port",
brname, ifname,
brname, ifname, virBufferContentAndReset(buf),
"--", "set", "Interface", ifname, attachedmac_ex_id,
"--", "set", "Interface", ifname, ifaceid_ex_id,
"--", "set", "Interface", ifname, vmid_ex_id,
......@@ -108,6 +135,7 @@ int virNetDevOpenvswitchAddPort(const char *brname, const char *ifname,
ret = 0;
cleanup:
VIR_FREE(buf);
VIR_FREE(attachedmac_ex_id);
VIR_FREE(ifaceid_ex_id);
VIR_FREE(vmid_ex_id);
......
......@@ -27,13 +27,15 @@
# include "internal.h"
# include "util.h"
# include "virnetdevvportprofile.h"
# include "virnetdevvlan.h"
int virNetDevOpenvswitchAddPort(const char *brname,
const char *ifname,
const virMacAddrPtr macaddr,
const unsigned char *vmuuid,
virNetDevVPortProfilePtr ovsport)
virNetDevVPortProfilePtr ovsport,
virNetDevVlanPtr virtVlan)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3)
ATTRIBUTE_RETURN_CHECK;
......
......@@ -280,6 +280,7 @@ int virNetDevTapCreateInBridgePort(const char *brname,
const unsigned char *vmuuid,
int *tapfd,
virNetDevVPortProfilePtr virtPortProfile,
virNetDevVlanPtr virtVlan,
unsigned int flags)
{
virMacAddr tapmac;
......@@ -324,7 +325,7 @@ int virNetDevTapCreateInBridgePort(const char *brname,
if (virtPortProfile) {
if (virNetDevOpenvswitchAddPort(brname, *ifname, macaddr, vmuuid,
virtPortProfile) < 0) {
virtPortProfile, virtVlan) < 0) {
goto error;
}
} else {
......
......@@ -25,6 +25,7 @@
# include "internal.h"
# include "virnetdevvportprofile.h"
# include "virnetdevvlan.h"
int virNetDevTapCreate(char **ifname,
int *tapfd,
......@@ -50,6 +51,7 @@ int virNetDevTapCreateInBridgePort(const char *brname,
const unsigned char *vmuuid,
int *tapfd,
virNetDevVPortProfilePtr virtPortProfile,
virNetDevVlanPtr virtVlan,
unsigned int flags)
ATTRIBUTE_NONNULL(1) ATTRIBUTE_NONNULL(2) ATTRIBUTE_NONNULL(3)
ATTRIBUTE_RETURN_CHECK;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册