- 22 6月, 2013 1 次提交
-
-
由 Jim Fehlig 提交于
libxl contains logic to determine an appropriate devid for new devices that do not specify one in their configuration. For all device types except NICs, the libxl driver allows libxl to determine devid. Do the same for NICs.
-
- 21 6月, 2013 1 次提交
-
-
Do not leave uninitialized variables, not all parameters are set in libxlMake*. Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
-
- 14 6月, 2013 1 次提交
-
-
Actually only those interface types are handled correctly so reject others instead of ignoring settings (i.e. treating as bridge/ethernet anyway). Also allow <script/> in 'ethernet' (which should be the only script-allowing type). Keep <script/> allowed in bridge to be compatible with legacy 'xen' driver. Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
-
- 12 6月, 2013 1 次提交
-
-
由 Jim Fehlig 提交于
The legacy xen toolstack will set pygrub as the bootloader if not specified. For compatibility, do the same in the libxl driver iff not using direct kernel boot.
-
- 21 5月, 2013 1 次提交
-
-
由 Osier Yang 提交于
-
- 09 5月, 2013 1 次提交
-
-
由 Michal Privoznik 提交于
-
- 30 4月, 2013 1 次提交
-
-
由 Jim Fehlig 提交于
libxlBuildDomainConfig() was disposing the libxl_domain_config object on error, only to have it disposed again by libxlBuildDomainConfig()'s caller, which resulted in a segfault. Leave disposing of the config object to it's owner.
-
- 05 4月, 2013 2 次提交
-
-
由 Peter Krempa 提交于
This patch refactors various places to allow removing of the defaultConsoleTargetType callback from the virCaps structure. A new console character device target type is introduced - VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was specified in the XML. This type is at the end converted to the standard VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are different from this default have to be processed separately in the device post parse callback.
-
由 Peter Krempa 提交于
Use the virDomainXMLConf structure to hold this data and tweak the code to avoid semantic change. Without configuration the KVM mac prefix is used by default. I chose it as it's in the privately administered segment so it should be usable for any purposes.
-
- 06 3月, 2013 1 次提交
-
-
由 John Ferlan 提交于
-
- 21 2月, 2013 1 次提交
-
-
由 Jim Fehlig 提交于
The libxl driver was setting the backend field of libxl_device_disk structure to LIBXL_DISK_BACKEND_TAP when the driver element of disk configuration was not specified. This needlessly forces the use of blktap driver, which may not be loaded in dom0 https://bugzilla.redhat.com/show_bug.cgi?id=912488 Ian Campbell suggested that LIBXL_DISK_BACKEND_UNKNOWN is a better default in this case https://www.redhat.com/archives/libvir-list/2013-February/msg01126.html
-
- 08 2月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
To enable virCapabilities instances to be reference counted, turn it into a virObject. All cases of virCapabilitiesFree turn into virObjectUnref Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 16 1月, 2013 1 次提交
-
-
由 Daniel P. Berrange 提交于
Replace the current libxl driver code for managing port reservations with the new virPortAllocator APIs.
-
- 21 12月, 2012 5 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
-
- 19 12月, 2012 2 次提交
-
-
由 Daniel P. Berrange 提交于
-
由 Daniel P. Berrange 提交于
Convert the host capabilities and domain config structs to use the virArch datatype. Update the parsers and all drivers to take account of datatype change Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 13 12月, 2012 1 次提交
-
-
由 Jim Fehlig 提交于
The libxl driver ignored boot devices in the domain config, preventing PXE booting HVM domains. This patch accounts for user-specified boot devices when building the libxl domain configuration.
-
- 07 12月, 2012 1 次提交
-
-
由 Jim Fehlig 提交于
Based on a patch originally authored by Daniel De Graaf http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html This patch converts the Xen libxl driver to support only Xen >= 4.2. Support for Xen 4.1 libxl is dropped since that version of libxl is designated 'technology preview' only and is incompatible with Xen 4.2 libxl. Additionally, the default toolstack in Xen 4.1 is still xend, for which libvirt has a stable, functional driver.
-
- 10 11月, 2012 1 次提交
-
-
由 Viktor Mihajlovski 提交于
For S390, the default console target type cannot be of type 'serial'. It is necessary to at least interpret the 'arch' attribute value of the os/type element to produce the correct default type. Therefore we need to extend the signature of defaultConsoleTargetType to account for architecture. As a consequence all the drivers supporting this capability function must be updated. Despite the amount of changed files, the only change in behavior is that for S390 the default console target type will be 'virtio'. N.B.: A more future-proof approach could be to to use hypervisor specific capabilities to determine the best possible console type. For instance one could add an opaque private data pointer to the virCaps structure (in case of QEMU to hold capsCache) which could then be passed to the defaultConsoleTargetType callback to determine the console target type. Seems to be however a bit overengineered for the use case... Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
-
- 02 11月, 2012 1 次提交
-
-
由 Daniel P. Berrange 提交于
The libvirt coding standard is to use 'function(...args...)' instead of 'function (...args...)'. A non-trivial number of places did not follow this rule and are fixed in this patch. Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
- 20 10月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Actually use the enum in the domain conf structure. * src/conf/domain_conf.h (_virDomainDiskDef): Store enum rather than string for disk type. * src/conf/domain_conf.c (virDomainDiskDefFree) (virDomainDiskDefParseXML, virDomainDiskDefFormat) (virDomainDiskDefForeachPath): Adjust users. * src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk): Likewise. * src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise. * src/vbox/vbox_tmpl.c (vboxAttachDrives): Likewise. * src/libxl/libxl_conf.c (libxlMakeDisk): Likewise.
-
- 21 9月, 2012 1 次提交
-
-
由 Eric Blake 提交于
https://www.gnu.org/licenses/gpl-howto.html recommends that the 'If not, see <url>.' phrase be a separate sentence. * tests/securityselinuxhelper.c: Remove doubled line. * tests/securityselinuxtest.c: Likewise. * globally: s/; If/. If/
-
- 23 7月, 2012 1 次提交
-
-
由 Osier Yang 提交于
Per the FSF address could be changed from time to time, and GNU recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html) You should have received a copy of the GNU General Public License along with Foobar. If not, see <http://www.gnu.org/licenses/>. This patch removes the explicit FSF address, and uses above instead (of course, with inserting 'Lesser' before 'General'). Except a bunch of files for security driver, all others are changed automatically, the copyright for securify files are not complete, that's why to do it manually: src/security/security_selinux.h src/security/security_driver.h src/security/security_selinux.c src/security/security_apparmor.h src/security/security_apparmor.c src/security/security_driver.c
-
- 20 7月, 2012 2 次提交
-
-
由 Daniel P. Berrange 提交于
Update the libxl driver to use virReportError instead of the libxlError custom macro Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
-
由 Jiri Denemark 提交于
Updates the libxl driver code so that it passes "%s" as the format string whenever raising an error message with a const string.
-
- 17 7月, 2012 1 次提交
-
-
由 Stefan Berger 提交于
Introduce new members in the virMacAddr 'class' - virMacAddrSet: set virMacAddr from a virMacAddr - virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer - virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer - virMacAddrCmp: comparing two virMacAddr - virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer then replace raw MAC addresses by replacing - 'unsigned char *' with virMacAddrPtr - 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr and introduce usage of above functions where necessary.
-
- 04 2月, 2012 1 次提交
-
-
由 Eric Blake 提交于
Our HACKING discourages use of malloc and free, for at least a couple of years now. But we weren't enforcing it, until now :) For now, I've exempted python and tests, and will clean those up in subsequent patches. Examples should be permanently exempt, since anyone copying our examples won't have use of our internal-only memory.h via libvirt_util.la. * cfg.mk (sc_prohibit_raw_allocation): New rule. (exclude_file_name_regexp--sc_prohibit_raw_allocation): and exemptions. * src/cpu/cpu.c (cpuDataFree): Avoid false positive. * src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix offenders. * src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb) (libxlMakeDeviceModelInfo): Likewise. * src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise. * tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.
-
- 08 1月, 2012 1 次提交
-
-
由 Laine Stump 提交于
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633 Although scripts are not used by interfaces of type other than "ethernet" in qemu, due to the fact that the parser stores the script name in a union that is only valid when type is ethernet or bridge, there is no way for anyone except the parser itself to catch the problem of specifying an interface script for an inappropriate interface type (by the time the parsed data gets back to the code that called the parser, all evidence that a script was specified is forgotten). Since the parser itself should be agnostic to which type of interface allows scripts (an example of why: a script specified for an interface of type bridge is valid for xen domains, but not for qemu domains), the solution here is to move the script out of the union(s) in the DomainNetDef, always populate it when specified (regardless of interface type), and let the driver decide whether or not it is appropriate. Currently the qemu, xen, libxml, and uml drivers recognize the script parameter and do something with it (the uml driver only to report that it isn't supported). Those drivers have been updated to log a CONFIG_UNSUPPORTED error when a script is specified for an interface type that's inappropriate for that particular hypervisor. (NB: There was earlier discussion of solving this problem by adding a VALIDATE flag to all libvirt APIs that accept XML, which would cause the XML to be validated against the RNG files. One statement during that discussion was that the RNG shouldn't contain hypervisor-specific things, though, and a proper solution to this problem would require that (again, because a script for an interface of type "bridge" is accepted by xen, but not by qemu).
-
- 03 11月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
The default console type may vary based on the OS type. ie a Xen paravirt guests wants a 'xen' console, while a fullvirt guests wants a 'serial' console. A plain integer default console type in the capabilities does not suffice. Instead introduce a callback that is passed the OS type. * src/conf/capabilities.h: Use a callback for default console type * src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback for default console type. Add missing LXC/OpenVZ console types. * src/esx/esx_driver.c, src/libxl/libxl_conf.c, src/lxc/lxc_conf.c, src/openvz/openvz_conf.c, src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c, src/uml/uml_conf.c, src/vbox/vbox_tmpl.c, src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c, src/xenapi/xenapi_driver.c: Set default console type callback
-
- 05 9月, 2011 1 次提交
-
-
由 Eric Blake 提交于
The previous patch introduced new config, but if a hypervisor does not support that new config, someone can write XML that does not behave as documented. This prevents some of those cases by explicitly rejecting transient disks for several hypervisors. Disk snapshots will require a new flag to actually affect a snapshot creation, so there's not much to reject there. * src/qemu/qemu_command.c (qemuBuildDriveStr): Reject transient disks for now. * src/libxl/libxl_conf.c (libxlMakeDisk): Likewise. * src/xenxs/xen_sxpr.c (xenFormatSxprDisk): Likewise. * src/xenxs/xen_xm.c (xenFormatXMDisk): Likewise.
-
- 29 7月, 2011 1 次提交
-
-
由 Laine Stump 提交于
This failure was introduced by commit dacee3d, which removed listenAddr from the unions in virDomainGraphicsDef in favor of putting it in the address attribute of virDomainGraphicsListenDef.
-
- 22 7月, 2011 1 次提交
-
-
由 Eric Blake 提交于
In preparation for a future patch adding new virFile APIs. * src/util/files.h, src/util/files.c: Move... * src/util/virfile.h, src/util/virfile.c: ...here, and rename functions to virFile prefix. Macro names are intentionally left alone. * *.c: All '#include "files.h"' uses changed. * src/Makefile.am (UTIL_SOURCES): Reflect rename. * cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise. * src/libvirt_private.syms: Likewise. * docs/hacking.html.in: Likewise. * HACKING: Regenerate.
-
- 31 5月, 2011 1 次提交
-
-
由 Markus Groß 提交于
This patch fixes the population of the libxenlight data structures. Now the devices should be removed correctly from the xenstore if they are detached.
-
- 26 5月, 2011 1 次提交
-
-
由 Markus Groß 提交于
Create 3 new function refactored from previous list ones and exports them internally to the driver * src/libxl/libxl_conf.c src/libxl/libxl_conf.h: create libxlMakeDisk, libxlMakeNic libxlMakeVfb out of the exsting static List functions and exports them
-
- 25 5月, 2011 1 次提交
-
-
由 Jim Fehlig 提交于
The cur_vcpus member of struct libxl_domain_build_info was incorrectly initialized to the number of vcpus, when it should have been interpreted as a bitmap, where bit X corresponds to online/offline status of vcpuX. To complicate matters, cur_vcpus is an int, so only 32 vcpus can be set online. Add a check to ensure vcpus does not exceed this limit. V2: Eric Blake noted a compilation pitfal when '1 << 32' on an int. Account for vcpus == 32.
-
- 11 5月, 2011 1 次提交
-
-
由 Paolo Bonzini 提交于
libxl accepts hpet configuration in its domain info struct. Parse the domain definition's <clock> element in order to set the value. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Apologies from Eric Blake, for mistakenly committing the broken intermediate version.
-