NIC_RX_FILTER_CHANGED is sent by qemu any time a NIC driver in the
guest modified the NIC's RX Filter (for example, if the MAC address of
the NIC is changed by the guest).

This patch doesn't do anything useful with that event; it just sets up
all the plumbing to get news of the event into a worker thread with
all proper locking/reference counting, and provide an easy place to
add in desired functionality.

See src/qemu/EVENTHANDLERS.txt for information/instructions on adding
a libvirt-internal handler for a qemu event (using
NIC_RX_FILTER_CHANGED as an example).

If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with

  'CreateMachine: File exists'

Additional processes can e.g. be added via

  echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks

but there are other cases like

  http://bugs.debian.org/761521

Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.

Commit fba6bc47 introduced the non-migratable invtsc feature,
breaking save/migration with host-model and host-passthrough.

On hosts with this feature present it was automatically included
in the CPU definition, regardless of QEMU support.

Commit de0aeafe stopped including it by default for host-model,
but failed to fix host-passthrough.

This commit ignores checking of CPU features with host-passthrough,
since we don't pass them to QEMU (only -cpu host is passed),
allowing domains using host-passthrough that were saved with
the broken version of libvirtd to be restored.

https://bugzilla.redhat.com/show_bug.cgi?id=1147584

On a domain startup, the variable store path is generated if needed.
The path is intended to be generated only once. However, the updated
domain definition is not saved into config dir rather than state XML
only. So later, whenever the domain is destroyed and the daemon is
restarted, the generated path is forgotten and the file may be left
behind on virDomainUndefine() call.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Request erroring out from the backing chain traveller and drop qemu's
internal backing chain integrity tester.

The backing chain traveller reports errors by itself with possibly more
detail than qemuDiskChainCheckBroken ever could.

We also need to make sure that we reconnect to existing qemu instances
even at the cost of losing the backing chain info (this really should be
stored in the XML rather than reloaded from disk, but that needs some
work).

Mimic the "Disk" processing for 'rawio', but for a scsi_host hostdev
lun device.

Adjust disk definition for 'rawio' to use the TristateBool logic

Commit id '9a2f36ec' added a build conditional of CAP_SYS_RAWIO
in order to determine whether or not a disk definition using rawio
should be allowed on platforms without CAP_SYS_RAWIO. If one was
found, virReportError was used but the code didn't goto cleanup.

This patch adds the goto.

We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.

This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Plug a memory leak and silence a warning.

Pass the user-specified tun path down when creating tap device
when called from the qemu driver.

Also honor the vhost device path specified by user.

Prior to trying the query-iothreads call - check if the qemu has
the capability
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Change "i+1" to "i + 1"

If there are no iothreads, then return from qemuProcessDetectIOThreadPIDs
without error; otherwise, the following occurs:

error: Failed to start domain $dom
error: An error occurred, but the cause is unknown

Modify qemuProcessStart() in order to allowing setting affinity to
specific CPU's for IOThreads. The process followed is similar to
that for the vCPU's.

This involves adding a function to fetch the IOThread id's via
qemuMonitorGetIOThreads() and adding them to iothreadpids[] list.
Then making sure all the cgroup data has been properly set up and
finally assigning affinity.

In qemuProcessInitPCIAddresses() if qemuMonitorGetAllPCIAddresses()
returns a negative (or zero) value, then no need to call the
qemuProcessDetectPCIAddresses().
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

When using split UEFI image, it may come handy if libvirt manages per
domain _VARS file automatically. While the _CODE file is RO and can be
shared among multiple domains, you certainly don't want to do that on
the _VARS file. This latter one needs to be per domain. So at the
domain startup process, if it's determined that domain needs _VARS
file it's copied from this master _VARS file. The location of the
master file is configurable in qemu.conf.

Temporary, on per domain basis the location of master NVRAM file can
be overridden by this @template attribute I'm inventing to the
<nvram/> element. All it does is holding path to the master NVRAM file
from which local copy is created. If that's the case, the map in
qemu.conf is not consulted.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Acked-by: NLaszlo Ersek <lersek@redhat.com>

Total time of a migration and total downtime transfered from a source to
a destination host do not count with the transfer time to the
destination host and with the time elapsed before guest CPUs are
resumed. Thus, source libvirtd remembers when migration started and when
guest CPUs were paused. Both timestamps are transferred to destination
libvirtd which uses them to compute total migration time and total
downtime. Obviously, this requires the time to be synchronized between
the two hosts. The reported times are useless otherwise but they would
be equally useless if we didn't do this recomputation so don't lose
anything by doing it.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

When QEMU fails during incoming migration after we successfully started
it (i.e., during Perform or Finish phase), we report a rather unhelpful
message

    Unable to read from monitor: Connection reset by peer

We already have a code that takes error messages from QEMU's error
output but we disable it once QEMU successfully starts. This patch
postpones this until the end of Finish phase during incoming migration
so that we can report a much better error message:

    internal error: early end of file from monitor: possible problem:
    Unknown savevm section or instance '0000:00:05.0/virtio-balloon' 0
    load of migration failed

https://bugzilla.redhat.com/show_bug.cgi?id=1090093Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.

This commit focuses on the qemu driver.

* src/qemu/qemu_command.c (qemuParseISCSIString)
(qemuParseCommandLineDisk, qemuParseCommandLine)
(qemuBuildSmpArgStr, qemuBuildCommandLine)
(qemuParseCommandLineDisk, qemuParseCommandLineSmp): Correct use
of {}.
* src/qemu/qemu_capabilities.c (virQEMUCapsProbeCPUModels):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainCoreDumpWithFormat)
(qemuDomainRestoreFlags, qemuDomainGetInfo)
(qemuDomainMergeBlkioDevice): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainAttachNetDevice): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextCreateSnapshot)
(qemuMonitorTextLoadSnapshot, qemuMonitorTextDeleteSnapshot):
Likewise.
* src/qemu/qemu_process.c (qemuProcessStop): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

If virSecurityManagerClearSocketLabel() fails, 'agent' won't
be freed before jumping to cleanup.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.

Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11
https://bugzilla.novell.com/show_bug.cgi?id=888166

To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0

srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock

Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: NChunyan Liu <cyliu@suse.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

The 'min_guarantee' is used by VMware ESX and OpenVZ drivers,
with qemu however, libvirt should report error when starting a domain,
because this element is not used.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1122455

Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.

 - qemuTranslateDiskSourcePool: move to storage/storage_driver.c
   and rename to virStorageTranslateDiskSourcePool,
 - qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
   and rename to virStorageAddISCSIPoolSourceHost,
 - qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
   and rename to virStorageTranslateDiskSourcePoolAuth,
 - Update users of qemuTranslateDiskSourcePool to use a
   new name.

Pin existing vcpus rather than existing vcpu pinning infos. This
increases the complexity of the lookup, but avoids pinning cpus that are
not enabled actually.

We set just one affinity of the emulator and the virConnectPtr isn't
needed for that function.

When editing guest's XML (on QEMU), it was possible to add multiple
listen elements into graphics parent element. However QEMU does not
support listening on multiple addresses. Configuration is tested for
multiple 'listen address' and if positive, an error is raised.

https://bugzilla.redhat.com/show_bug.cgi?id=1119212

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

During a QEMU live migration several warning messages about job
handling could be written to syslog on the destination host:

"entering monitor without asking for a nested job is dangerous"

The messages are written because the job handling during migration
uses hard coded asyncJob values in several places that are incorrect.

This patch passes the required asyncJob value around and prevents
the warnings as well as any issues that the warnings may be referring
to.

https://bugzilla.redhat.com/show_bug.cgi?id=1130089Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Fix header alignment and remove the unused conn parameter.

A future patch is going to wire up qemu active block commit jobs;
but as they have similar events and are canceled/pivoted in the
same way as block copy jobs, it is easiest to track all bookkeeping
for the commit job by reusing the <mirror> element.  This patch
adds domain XML to track which job was responsible for creating a
mirroring situation, and adds a job='copy' attribute to all
existing uses of <mirror>.  Along the way, it also massages the
qemu monitor backend to read the new field in order to generate
the correct type of libvirt job (even though it requires a
future patch to actually cause a qemu event that can be reported
as an active commit).  It also prepares to update persistent XML
to match changes made to live XML when a copy completes.

* docs/schemas/domaincommon.rng: Enhance schema.
* docs/formatdomain.html.in: Document it.
* src/conf/domain_conf.h (_virDomainDiskDef): Add a field.
* src/conf/domain_conf.c (virDomainBlockJobType): String conversion.
(virDomainDiskDefParseXML): Parse job type.
(virDomainDiskDefFormat): Output job type.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Distinguish
active from regular commit.
* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Set job type.
(qemuDomainBlockPivot, qemuDomainBlockJobImpl): Clean up job type
on completion.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-mirror-old.xml:
Update tests.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Likewise.
* tests/qemuxml2argvdata/qemuxml2argv-disk-active-commit.xml: New
file.
* tests/qemuxml2xmltest.c (mymain): Drive new test.
Signed-off-by: NEric Blake <eblake@redhat.com>

We were not directly saving the domain XML to file after starting
or finishing a blockcopy.  Without the startup write, a libvirtd
restart in the middle of a copy job would forget that the job was
underway.  Then at pivot, we were indirectly writing new XML in
reaction to events that occur as we stop and restart the guest CPUs.
But there was a race: since pivot is an async action, it is possible
that libvirtd is restarted before the pivot completes, so if XML
changes during the event, that change was not written.  The original
blockcopy code cleared out the <mirror> element prior to restarting
the CPUs, but this is also a race, observed if a user does an async
pivot and a dumpxml before the event occurs.  Furthermore, this race
will interfere with active commit in a future patch, because that
code will rely on the <mirror> element at the time of the qemu event
to determine whether to inform the user of a normal commit or an
active commit.

Fix things by saving state any time we modify live XML, while
delaying XML disk modifications until after the event completes.  We
still need a to teach libvirtd restarts to examine all existing
<mirror> elements to see if the job completed in the meantime (that
is, if libvirtd misses the event, the updated state still needs to be
updated in live XML), but that will be a later patch, in part because
we also need to to start taking advantage of newer qemu's ability to
keep the job around after completion rather than the current usage
where the job disappears both on error and on success.

* src/qemu/qemu_driver.c (qemuDomainBlockCopy): Track XML change
on disk.
(qemuDomainBlockJobImpl, qemuDomainBlockPivot): Move job-end XML
rewrites...
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): ...here.
Signed-off-by: NEric Blake <eblake@redhat.com>

Doing a blockcopy operation across a libvirtd restart is not very
robust at the moment.  In particular, we are clearing the <mirror>
element prior to telling qemu to finish the job.  Also, thanks to the
ability to request async completion, the user can easily regain
control prior to qemu actually finishing the effort, and they should
be able to poll the domain XML to see if the job is still going.

A future patch will fix things to actually wait until qemu is done
before modifying the XML to reflect the job completion.  But since
qemu issues identical BLOCK_JOB_COMPLETE events regardless of whether
the job was cancelled (kept the original disk) or completed (pivoted
to the new disk), we have to track which of the two operations were
used to end the job.  Furthermore, we'd like to avoid attempts to
end a job where we are already waiting on an earlier request to qemu
to end the job.  Likewise, if we miss the qemu event (perhaps because
it arrived during a libvirtd restart), we still need enough state
recorded to be able to determine how to modify the domain XML once
we reconnect to qemu and manually learn whether the job still exists.

Although this patch doesn't actually fix the problem, it is a
preliminary step that makes it possible to track whether a job
has already begun steps towards completion.

* src/conf/domain_conf.h (virDomainDiskMirrorState): New enum.
(_virDomainDiskDef): Convert bool mirroring to new enum.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainDiskDefFormat): Handle new values.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Adjust
client.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
* docs/schemas/domaincommon.rng (diskMirror): Expose new values.
* docs/formatdomain.html.in (elementsDisks): Document it.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: NEric Blake <eblake@redhat.com>

  <memoryBacking>
    <hugepages>
      <page size="1" unit="G" nodeset="0-3,5"/>
      <page size="2" unit="M" nodeset="4"/>
    </hugepages>
  </memoryBacking>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.

Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

For the values "default", "on", "off"

Replaces
virDeviceAddressPCIMulti
virDomainFeatureState
virDomainIoEventFd
virDomainVirtioEventIdx
virDomainDiskCopyOnRead
virDomainMemDump
virDomainPCIRombarMode
virDomainGraphicsSpicePlaybackCompression

When domain is started with numatune memory mode strict and the
nodeset does not include host NUMA node with DMA and DMA32 zones, KVM
initialization fails.  This is because cgroup restrict even kernel
allocations.  We are already doing numa_set_membind() which does the
same thing, only it does not restrict kernel allocations.

This patch leaves the userspace numa_set_membind() in place and moves
the cpuset.mems setting after the point where monitor comes up, but
before vcpu and emulator sub-groups are created.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways.  On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).

In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:

s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g

then shrunk long lines, and mainly functions, that were created after
that:

sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'

And to cope with the enum name, I haad to change the constants as
well:

s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g

Last thing I did was at least a little shortening of already long
name:

s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

This saves a few lines of code and catches the error when:
<spice autoport ='yes' defaultMode='any' ..>
  <channel name='main' mode='secure'/>
</spice>
is specified with spice_tls = 0 in qemu.conf.

Instead of this error in qemuBuildGraphicsSPICECommandLine:
error: unsupported configuration: spice secure channels set in XML
configuration, but TLS port is not provided

an error is reported in qemuProcessSPICEAllocatePorts:
error: unsupported configuration: Auto allocation of spice TLS port
requested but spice TLS is disabled in qemu.conf

Inspired by:
https://www.redhat.com/archives/libvir-list/2014-June/msg01408.html