Before:

 # virsh blockjob r7 vdc
 error: An error occurred, but the cause is unknown

After:

 # virsh blockjob r7 vdc
 error: Disk 'vdc' not found in the domain

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1241355Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Setting of 'val' is a boolean expression, so handle it that way and
adjust the check/return logic to be clearer
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Set to ret = -1 and prove otherwise, like usual
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Since a future patch will need the device path generated when adding a
shared host device, remove the qemuAddSharedHostdev and inline the two
calls into qemuAddSharedHostdev and qemuRemoveSharedHostdev
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Split out the current function in order to share the code with hostdev
in a future patch. Failure to match the expected sgio value against what
is stored will cause an error which the caller would need to handle since
only the caller has the disk (or eventually hostdev) specific data in
order to uniquely identify the disk in an error message.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Introduce a convenience function to handle formulating the hostdev path
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

Add a single boolean function to handle whether the hostdev is shared or not.

Use the new function for the qemu{Add|Remove}SharedHostdev calls as well
as qemuSetUnprivSGIO. NB: This third usage fixes a possible bug where
if this feature is enabled at some time in the future and the shareable flag
wasn't set, the sgio would have been erroneously set.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>

If user passes an invalid address for shared memory device to qemu,
neither libvirt nor qemu will report an error, but qemu will auto assign
a pci address to the shared memory device.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

As the backend of shmem server is a unix type chr device, save it in
virDomainChrSourceDef, so we can reuse the existing code for chr device.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Rename qemuBuildShmemDevCmd to qemuBuildShmemDevStr and change the
return type so that it can be reused in the device hotplug code later.

And split the chardev creation part in a new function
qemuBuildShmemBackendStr for reuse in the device hotplug code later.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165029Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Since QEMU commit ea96bc6 [1]:
i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted
the floppy controller is no longer implicit.

Specify it explicitly on the command line if the machine type version
is 2.4 or later.

Note that libvirt's floppy drives do not result in QEMU implying the
controller, because libvirt uses if=none instead of if=floppy.

https://bugzilla.redhat.com/show_bug.cgi?id=1227880

[1] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=ea96bc6

For the implicit controller, we set them via -global.
Separating them will allow reuse for explicit fdc controller as well.

No functional impact apart from one extra allocation.

When use setvcpus command with --guest option to a offline vm,
we will get error:

 # virsh setvcpus test3 1 --guest
 error: Guest agent is not responding: QEMU guest agent is not connected

However guest is not running, agent status could not be connected.
In this case, report domain is not running will be better than agent is
not connected. Move the guest status check more early to output error to
point out guest status is not right.

Also from the logic, a running vm is a basic requirement to use
agent, we cannot use agent if vm is not running.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

We set @hostcpus variable but not use it.
Signed-off-by: NLuyao Huang <lhuang@redhat.com>

Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Commit id 'f967e7a6' didn't place the closing parentheses quite right
causing DEADCODE errors since the rc setting/comparison was wrong.

Using a custom device tree image may cause unexpected behavior in
architectures that use this approach to detect platform devices. Since
usually the device tree is generated by qemu and thus it's not normally
used let's taint VMs using it to make it obvious as a possible source of
problems.

The memory device hot(un)plug was missing calls to the auditing code.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1226234

Since the balloon driver does not guarantee that it returns memory to
the host, using the value in the audit message is not a good idea.

This patch removes auditing from updating the balloon size and reports
the total physical size at startup.

The code which generates paths for UNIX socket blindly used target name
without checking if it was set. Thus for the following device XML

    <channel type='unix'>
      <source mode='bind'/>
      <target type='virtio'/>
    </channel>

we would generate "/var/lib/libvirt/qemu/channel/target/NAME.(null)"
path which works but is not really correct. Let's not use the
".target_name" suffix at all if target name is not set.

https://bugzilla.redhat.com/show_bug.cgi?id=1226854Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

While CPU0 was made unpluggable in Linux a while ago it's not desirable
to unplug it since some parts of the kernel (suspend-to-ram) still
depend on it.

This patch fixes the vCPU selection code in libvirt so that it will not
be disabled.

Signed-off-by: NLuyao Huang <lhuang@redhat.com>

The target type comparison in qemuDomainDetachChrDevice
used the VIR_DOMAIN_CHR_SERIAL_TARGET_TYPE enum, so virtio-serial
addresses were not freed properly for channel devices.

Call qemuDomainReleaseDeviceAddress uncoditionally and decide
based on the address type instead of the target/device types.

Also check the device type when deciding what type the address should
be. Commit 9807c471 (aiming to fix another error in address allocation)
only checked the target type, but its value is different for different
device types. This resulted in an error when trying to attach
a channel with target type 'virtio':

error: Failed to attach device from channel-file.xml
error: internal error: virtio serial device has invalid address type

Make the logic for releasing the address dependent only on
* the address type
* whether it was allocated earlier
to avoid copying the device and target type checks.

https://bugzilla.redhat.com/show_bug.cgi?id=1230039Signed-off-by: NLuyao Huang <lhuang@redhat.com>
Signed-off-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1201760

When the domain "<on_crash>coredump-destroy</on_crash>" is set, the
domain wasn't being destroyed, rather it was being rebooted.

Add VIR_DOMAIN_LIFECYCLE_CRASH_COREDUMP_DESTROY to the list of
on_crash types that cause "-no-reboot" to be added to the qemu
command line.

Although defined the same way, fortunately there hadn't been any deviation.
Ensure any assignments to onCrash use VIR_DOMAIN_LIFECYCLE_CRASH_* defs and
not VIR_DOMAIN_LIFECYCLE_* defs

Get rid of spice specific stuff from the handler func and save a few
lines by reflowing the conditions.

Spice events have mostly similar information present in the event JSON
but they differ in the name of the element containing the port.

The JSON event also provides connection ID which might be useful in the
future.

This patch splits up the event parser code into two functions and the
SPICE reimplements the event parsing with correct names and drops the
VNC only stuff.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1236585

The capability was not used up to the feature freeze.

This reverts commit 7f3515b4.

processSerialChangedEvent processes events for all channels. Commit
2af51483 broke all agent interaction if a channel other than the agent
closes since it did not check that the event actually originated from
the guest agent channel.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1236924
Fixes up: https://bugzilla.redhat.com/show_bug.cgi?id=890648

Make sure we only assign the default spicevmc channel name to spicevmc
virtio channels. Caused by commits 3269ee65 and 1133ee2b, which moved
the assignment from XML parsing code to QEMU but failed to keep the
logic.

https://bugzilla.redhat.com/show_bug.cgi?id=1179680Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

Commit id '15fa84ac' added the alias fetch, but forgot to free it.

When support for the pcie-root and dmi-to-pci-bridge buses on a Q35
machinetype was added, I was concerned that even though qemu at the
time allowed plugging a PCI device into a PCIe port, that it might not
be supported in the future. To prevent painful backtracking in the
possible future where this happened, I disallowed such connections
except in a few specific cases requested by qemu developers (indicated
in the code with the flag VIR_PCI_CONNECT_TYPE_EITHER_IF_CONFIG).

Now that a couple years have passed, there is a clear message from
qemu that there is no danger in allowing PCI devices to be plugged
into PCIe ports. This patch eliminates
VIR_PCI_CONNECT_TYPE_EITHER_IF_CONFIG and changes the code to always
allow PCI->PCIe or PCIe->PCI connection *when the PCI address is
specified in the config. (For newly added devices that haven't yet
been given a PCI address, the auto-placement still prefers using the
correct type of bus).

The PCI case of the switch statement in this function contains another
switch statement with a case for each model. Currently every model
except pci-root and pcie-root has a check for index > 0 (since only
those two can have index==0), and the function should never be called
for those two anyway. If we move the check for !pci[e]-root to the top
of the pci case, then we can move the check for index > 0 out of the
individual model cases. This will save repeating that check for the
three new controller models about to be added.

Now that qemuMonitorGetAllBlockStatsInfo collects also wr_highest_offset
the whole function can be killed.

Change the code so that it queries the monitor when the VM is alive.

Instead of using qemuMonitorJSONDevGetBlockExtent (which I plan to
remove later) extract the data in place.

Additionally add a flag that will be set when the wr_highest_offset was
extracted correctly so that callers can act according to that.

The test case addition should help make sure that everything works.