Cleanup the libxl capabilities code to be a bit more extensible,
splitting out the creation of host and guest capabilities.  This
should make it easier to implement additional capabilities in the
future, such as NUMA topology reporting.

As per HACKING, remove some unneeded curly braces in the
libxl driver.

this patch introduce the console api in libxl driver for both pv and
hvm guest.  and import and update the libxlMakeChrdevStr function
which was deleted in commit dfa1e1dd.
Signed-off-by: NBamvor Jian Zhang <bjzhang@suse.com>

The avail_vcpu bitmap has to be allocated before it can be used (using
the maximum allowed value for that). Then for each available VCPU the
bit in the mask has to be set (libxl_bitmap_set takes a bit position
as an argument, not the number of bits to set).

Without this, I would always only get one VCPU for guests created
through libvirt/libxl.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>

Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

libxl supports the LIBXL_DISK_BACKEND_QDISK disk backend, where qemu
is used to provide the disk backend.  This patch simply maps the
existing <driver name='qemu'/> to LIBXL_DISK_BACKEND_QDISK.

Specifying an unsupported disk format with the tap driver resulted in
a less than helpful error message

error: Failed to start domain test-hvm
error: internal error libxenlight does not support disk driver qed

Change the message to state that the qed format is not supported by
the tap driver, e.g.

error: Failed to start domain test-hvm
error: internal error libxenlight does not support disk format qed
with disk driver tap

While at it, check for unsupported formats in the other driver
backends.

libxl contains logic to determine an appropriate devid for new devices
that do not specify one in their configuration.  For all device types
except NICs, the libxl driver allows libxl to determine devid.  Do the
same for NICs.

Do not leave uninitialized variables, not all parameters are set in
libxlMake*.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

Actually only those interface types are handled correctly so reject
others instead of ignoring settings (i.e. treating as bridge/ethernet
anyway).
Also allow <script/> in 'ethernet' (which should be the only
script-allowing type). Keep <script/> allowed in bridge to be compatible
with legacy 'xen' driver.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>

The legacy xen toolstack will set pygrub as the bootloader if not
specified.  For compatibility, do the same in the libxl driver
iff not using direct kernel boot.

libxlBuildDomainConfig() was disposing the libxl_domain_config object
on error, only to have it disposed again by libxlBuildDomainConfig()'s
caller, which resulted in a segfault.  Leave disposing of the config
object to it's owner.

This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.

Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.

The libxl driver was setting the backend field of libxl_device_disk
structure to LIBXL_DISK_BACKEND_TAP when the driver element of disk
configuration was not specified.  This needlessly forces the use of
blktap driver, which may not be loaded in dom0

https://bugzilla.redhat.com/show_bug.cgi?id=912488

Ian Campbell suggested that LIBXL_DISK_BACKEND_UNKNOWN is a better
default in this case

https://www.redhat.com/archives/libvir-list/2013-February/msg01126.html

To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Replace the current libxl driver code for managing port
reservations with the new virPortAllocator APIs.

Convert the host capabilities and domain config structs to
use the virArch datatype. Update the parsers and all drivers
to take account of datatype change
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The libxl driver ignored boot devices in the domain config,
preventing PXE booting HVM domains.  This patch accounts for
user-specified boot devices when building the libxl domain
configuration.

Based on a patch originally authored by Daniel De Graaf

  http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html

This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl.  Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.

For S390, the default console target type cannot be of type 'serial'.
It is necessary to at least interpret the 'arch' attribute
value of the os/type element to produce the correct default type.

Therefore we need to extend the signature of defaultConsoleTargetType
to account for architecture. As a consequence all the drivers
supporting this capability function must be updated.

Despite the amount of changed files, the only change in behavior is
that for S390 the default console target type will be 'virtio'.

N.B.: A more future-proof approach could be to to use hypervisor
specific capabilities to determine the best possible console type.
For instance one could add an opaque private data pointer to the
virCaps structure (in case of QEMU to hold capsCache) which could
then be passed to the defaultConsoleTargetType callback to determine
the console target type.
Seems to be however a bit overengineered for the use case...
Signed-off-by: NViktor Mihajlovski <mihajlov@linux.vnet.ibm.com>

The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Actually use the enum in the domain conf structure.

* src/conf/domain_conf.h (_virDomainDiskDef): Store enum rather
than string for disk type.
* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskDefParseXML, virDomainDiskDefFormat)
(virDomainDiskDefForeachPath): Adjust users.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenFormatSxprDisk):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM, xenFormatXMDisk): Likewise.
* src/vbox/vbox_tmpl.c (vboxAttachDrives): Likewise.
* src/libxl/libxl_conf.c (libxlMakeDisk): Likewise.

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Update the libxl driver to use virReportError instead of
the libxlError custom macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Updates the libxl driver code so that it passes "%s" as the format
string whenever raising an error message with a const string.

Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.

Our HACKING discourages use of malloc and free, for at least
a couple of years now.  But we weren't enforcing it, until now :)

For now, I've exempted python and tests, and will clean those up
in subsequent patches.  Examples should be permanently exempt,
since anyone copying our examples won't have use of our
internal-only memory.h via libvirt_util.la.

* cfg.mk (sc_prohibit_raw_allocation): New rule.
(exclude_file_name_regexp--sc_prohibit_raw_allocation): and
exemptions.
* src/cpu/cpu.c (cpuDataFree): Avoid false positive.
* src/conf/network_conf.c (virNetworkDNSSrvDefParseXML): Fix
offenders.
* src/libxl/libxl_conf.c (libxlMakeDomBuildInfo, libxlMakeVfb)
(libxlMakeDeviceModelInfo): Likewise.
* src/rpc/virnetmessage.c (virNetMessageSaveError): Likewise.
* tools/virsh.c (_vshMalloc, _vshCalloc): Likewise.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633

Although scripts are not used by interfaces of type other than
"ethernet" in qemu, due to the fact that the parser stores the script
name in a union that is only valid when type is ethernet or bridge,
there is no way for anyone except the parser itself to catch the
problem of specifying an interface script for an inappropriate
interface type (by the time the parsed data gets back to the code that
called the parser, all evidence that a script was specified is
forgotten).

Since the parser itself should be agnostic to which type of interface
allows scripts (an example of why: a script specified for an interface
of type bridge is valid for xen domains, but not for qemu domains),
the solution here is to move the script out of the union(s) in the
DomainNetDef, always populate it when specified (regardless of
interface type), and let the driver decide whether or not it is
appropriate.

Currently the qemu, xen, libxml, and uml drivers recognize the script
parameter and do something with it (the uml driver only to report that
it isn't supported). Those drivers have been updated to log a
CONFIG_UNSUPPORTED error when a script is specified for an interface
type that's inappropriate for that particular hypervisor.

(NB: There was earlier discussion of solving this problem by adding a
VALIDATE flag to all libvirt APIs that accept XML, which would cause
the XML to be validated against the RNG files. One statement during
that discussion was that the RNG shouldn't contain hypervisor-specific
things, though, and a proper solution to this problem would require
that (again, because a script for an interface of type "bridge" is
accepted by xen, but not by qemu).