Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.

Add daemon and driver code to (de-)serialize virDomainFSInfo.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.

To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.

Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

It would be nice to also print a params pointer and number of params in
the debug message and the previous limit for number of params in the rpc
message was too large. The 2048 params will be enough for future events.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

A long time ago in a galaxy far, far away it has been decided
that libvirt will manage not only domains but host as well. And
with my latest work on qemu driver supporting huge pages, we miss
the cherry on top: an API to allocate huge pages on the run.
Currently users are forced to log into the host and adjust the
huge pages pool themselves.  However, with this API the problem
is gone - they can both size up and size down the pool.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Convert the remote daemon auth check and the access control
code to use the common polkit API for checking auth.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: NPavel Hrdina <phrdina@redhat.com>

Clean up all _virDomainMemoryStat.
Signed-off-by: NJames <james.wangyufei@huawei.com>
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>
Signed-off-by: NEric Blake <eblake@redhat.com>

Need to free 'uri_out' on error path.
Signed-off-by: NWang Rui <moon.wangrui@huawei.com>

In each of these cases, Coverity complains that the result count returned
on error paths would be -1 disregarding that the count and the corresponding
are "linked" together (it doesn't know that).  Simple enough to check and
remove the warning

Implement the remote driver support for shuffling the domain stats
around.

Let's fix this before we bake in a painful API.  Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer.  Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.

* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: NEric Blake <eblake@redhat.com>

Instead of maintaining two very similar APIs, add the "@mac" parameter
to virNetworkGetDHCPLeases and kill virNetworkGetDHCPLeasesForMAC. Both
of those functions would return data the same way, so making @mac an
optional filter simplifies a lot of stuff.

Don't leak the temporary variables on success if NULL is returned
for that field.

Don't dereference NULL on failure to allocate some of the temporaries.

Introduced by commit 990c3b65

Variables/fields named 'interface' clash with system
header symbols on some platforms.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Implement RPC calls for virNetworkGetDHCPLeases, virNetworkGetDHCPLeasesForMAC

daemon/remote.c
   * Define remoteSerializeNetworkDHCPLeases,
            remoteDispatchNetworkGetDHCPLeases
   * Define remoteDispatchNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_driver.c
   * Define remoteNetworkGetDHCPLeases
   * Define remoteNetworkGetDHCPLeasesForMAC
   * Define helper function remoteSerializeDHCPLease

src/remote/remote_protocol.x
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES
   * Define structs remote_network_dhcp_leases, remote_network_get_dhcp_leases_args,
                    remote_network_get_dhcp_leases_ret
   * New RPC procedure: REMOTE_PROC_NETWORK_GET_DHCP_LEASES_FOR_MAC
   * Define structs remote_network_dhcp_leases_for_mac, remote_network_get_dhcp_leases_for_mac_args,
                    remote_network_get_dhcp_leases_for_mac_ret

src/remote_protocol-structs
   * New structs added

src/rpc/gendispatch.pl
   * Add exception (s/Dhcp/DHCP) for auto-generating names of the remote functions
     in daemon/remote_dispatch.h

The aim of the API is to get information on number of free pages
on the system. The API behaves similar to the
virNodeGetCellsFreeMemory(). User passes starting NUMA cell, the
count of nodes that he's interested in, pages sizes (yes,
multiple sizes can be queried at once) and the counts are
returned in an array.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name.  It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name.  But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).

Adam Litke reported that having an unstable string between events
makes life harder for clients.  Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda').  As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.

But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it.  Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix).  We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).

Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.

* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

These APIs allow users to get or set time in a domain, which may come
handy if the domain has been resumed just recently and NTP is not
configured or hasn't kicked in yet and the guest is running
something time critical. In addition, NTP may refuse to re-set the clock
if the skew is too big.

In addition, new ACL attribute is introduced 'set_time'.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

These are the first async events in the qemu protocol, so this
patch looks rather big compared to most RPC additions.  However,
a large majority of this patch is just mechanical copy-and-paste
from recently-added network events.  It didn't help that this
is also the first virConnect rather than virDomain prefix
associated with a qemu-specific API.

* src/remote/qemu_protocol.x (qemu_*_domain_monitor_event_*): New
structs and RPC messages.
* src/rpc/gendispatch.pl: Adjust naming conventions.
* daemon/libvirtd.h (daemonClientPrivate): Track qemu events.
* daemon/remote.c (remoteClientFreeFunc): Likewise.
(remoteRelayDomainQemuMonitorEvent)
(qemuDispatchConnectDomainMonitorEventRegister)
(qemuDispatchConnectDomainMonitorEventDeregister): New functions.
* src/remote/remote_driver.c (qemuEvents): Handle qemu events.
(doRemoteOpen): Register for events.
(remoteNetworkBuildEventLifecycle)
(remoteConnectDomainQemuMonitorEventRegister)
(remoteConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The counter gets incremented on each unauthenticated client added to the
server and decremented whenever the client authenticates.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations.  Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit.  Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big.  And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.

So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.

* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

Commit 57ddcc23 (v0.9.11) introduced the pmwakeup event, with
an optional 'reason' field reserved for possible future expansion.
But it failed to wire the field through RPC, so even if we do
add a reason in the future, we will be unable to get it back
to the user.

Worse, commit 7ba5defb (v1.0.0) repeated the same mistake with
the pmsuspend_disk event.

As long as we are adding new RPC calls, we might as well fix
the events to actually match the signature so that we don't have
to add yet another RPC in the future if we do decide to start
using the reason field.

* src/remote/remote_protocol.x
(remote_domain_event_callback_pmwakeup_msg)
(remote_domain_event_callback_pmsuspend_msg)
(remote_domain_event_callback_pmsuspend_disk_msg): Add reason
field.
* daemon/remote.c (remoteRelayDomainEventPMWakeup)
(remoteRelayDomainEventPMSuspend)
(remoteRelayDomainEventPMSuspendDisk): Pass reason to client.
* src/conf/domain_event.h (virDomainEventPMWakeupNewFromDom)
(virDomainEventPMSuspendNewFromDom)
(virDomainEventPMSuspendDiskNewFromDom): Require additional
parameter.
* src/conf/domain_event.c (virDomainEventPMClass): New class.
(virDomainEventPMDispose): New function.
(virDomainEventPMWakeupNew*, virDomainEventPMSuspendNew*)
(virDomainEventPMSuspendDiskNew*)
(virDomainEventDispatchDefaultFunc): Use new class.
* src/remote/remote_driver.c (remoteDomainBuildEvent*PM*): Pass
reason through.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Following the patterns established by lifecycle events, this
creates all the new RPC calls needed to pass callback IDs
for every domain event, and changes the limits in client and
server codes to use modern style when possible.

I've tested all combinations: both 'old client and new server'
and 'new client and old server' continue to work with the old
RPCs, and 'new client and new server' benefit from server-side
filtering with the new RPCs.

* src/remote/remote_protocol.x (REMOTE_PROC_DOMAIN_EVENT_*): Add
REMOTE_PROC_DOMAIN_EVENT_CALLBACK_* counterparts.
* daemon/remote.c (remoteRelayDomainEvent*): Send callbackID via
newer RPC when used with new-style registration.
(remoteDispatchConnectDomainEventCallbackRegisterAny): Extend to
cover all domain events.
* src/remote/remote_driver.c (remoteDomainBuildEvent*): Add new
Callback and Helper functions.
(remoteEvents): Match order of RPC numbers, register new handlers.
(remoteConnectDomainEventRegisterAny)
(remoteConnectDomainEventDeregisterAny): Extend to cover all
domain events.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

This patch adds some new RPC call numbers, but for ease of review,
they sit idle until a later patch adds the client counterpart to
drive the new RPCs.  Also for ease of review, I limited this patch
to just the lifecycle event; although converting the remaining
15 domain events will be quite mechanical.  On the server side,
we have to have a function per RPC call, largely with duplicated
bodies (the key difference being that we store in our callback
opaque pointer whether events should be fired with old or new
style); meanwhile, a single function can drive multiple RPC
messages.  With a strategic choice of XDR struct layout, we can
make the event generation code for both styles fairly compact.

I debated about adding a tri-state witness variable per
connection (values 'unknown', 'legacy', 'modern').  It would start
as 'unknown', move to 'legacy' if any RPC call is made to a legacy
event call, and move to 'modern' if the feature probe is made;
then the event code could issue an error if the witness state is
incorrect (a legacy RPC call while in 'modern', a modern RPC call
while in 'unknown' or 'legacy', and a feature probe while in
'legacy' or 'modern').  But while it might prevent odd behavior
caused by protocol fuzzing, I don't see that it would prevent
any security holes, so I considered it bloat.

Note that sticking @acl markers on the new RPCs generates unused
functions in access/viraccessapicheck.c, because there is no new
API call that needs to use the new checks; however, having a
consistent .x file is worth the dead code.

* src/libvirt_internal.h (VIR_DRV_FEATURE_REMOTE_EVENT_CALLBACK):
New feature.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_REGISTER_ANY)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_CALLBACK_DEREGISTER_ANY)
(REMOTE_PROC_DOMAIN_EVENT_CALLBACK_LIFECYCLE): New RPCs.
* daemon/remote.c (daemonClientCallback): Add field.
(remoteDispatchConnectDomainEventCallbackRegisterAny)
(remoteDispatchConnectDomainEventCallbackDeregisterAny): New
functions.
(remoteDispatchConnectDomainEventRegisterAny)
(remoteDispatchConnectDomainEventDeregisterAny): Mark legacy use.
(remoteRelayDomainEventLifecycle): Change message based on legacy
or new use.
(remoteDispatchConnectSupportsFeature): Advertise new feature.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

This patch continues the earlier conversion made for network
events, with a goal of introducing server-side event filtering
in a later patch.  Actual behavior is unchanged without
further RPC changes.

* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
domain events.
* daemon/remote.c (remoteClientInitHook, remoteClientFreeFunc)
(remoteRelayDomainEvent*)
(remoteDispatchConnectDomainEventRegister)
(remoteDispatchConnectDomainEventRegisterAny): Track domain
callbacks dynamically.

https://bugzilla.redhat.com/show_bug.cgi?id=1058839

Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send.  But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr.  But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.

Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions.  So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.

If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event.  But
setting up that back-reference is a bit invasive.  Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity.  As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration.  Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.

Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so.  In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.

* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: NEric Blake <eblake@redhat.com>

We haven't had a release with network events yet, so we are free
to fix the RPC so that it actually does what we want.  Doing
client-side filtering of per-network events is inefficient if a
connection is only interested in events on a single network out
of hundreds available on the server.  But to do server-side
per-network filtering, the server needs to know which network
to filter on - so we need to pass an optional network over on
registration.  Furthermore, it is possible to have a client with
both a global and per-network filter; in the existing code, the
server sends only one event and the client replicates to both
callbacks.  But with server-side filtering, the server will send
the event twice, so we need a way for the client to know which
callbackID is sending an event, to ensure that the client can
filter out events from a registration that does not match the
callbackID from the server.  Likewise, the existing style of
deregistering by eventID alone is fine; but in the new style,
we have to remember which callbackID to delete.

This patch fixes the RPC wire definition to contain all the
needed pieces of information, and hooks into the server and
client side improvements of the previous patches, in order to
switch over to full server-side filtering of network events.
Also, since we fixed this in time, all released versions of
libvirtd that support network events also support per-network
filtering, so we can hard-code that assumption into
network_event.c.

Converting domain events to server-side filtering will require
the introduction of new RPC numbers, as well as a server
feature bit that the client can use to tell whether to use
old-style (server only supports global events) or new-style
(server supports filtered events), so that is deferred to a
later set of patches.

* src/conf/network_event.c (virNetworkEventStateRegisterClient):
Assume server-side filtering.
* src/remote/remote_protocol.x
(remote_connect_network_event_register_any_args): Add network
argument.
(remote_connect_network_event_register_any_ret): Return callbackID
instead of count.
(remote_connect_network_event_deregister_any_args): Pass
callbackID instead of eventID.
(remote_connect_network_event_deregister_any_ret): Drop unused
type.
(remote_network_event_lifecycle_msg): Add callbackID.
* daemon/remote.c
(remoteDispatchConnectNetworkEventDeregisterAny): Drop unused arg,
and deal with callbackID from client.
(remoteRelayNetworkEventLifecycle): Pass callbackID.
(remoteDispatchConnectNetworkEventRegisterAny): Likewise, and
recognize non-NULL network.
* src/remote/remote_driver.c
(remoteConnectNetworkEventRegisterAny): Pass network, and track
server side id.
(remoteConnectNetworkEventDeregisterAny): Deregister by callback id.
(remoteNetworkBuildEventLifecycle): Pass remote id to event queue.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: NEric Blake <eblake@redhat.com>

Right now, the daemon side of RPC events is hard-coded to at most
one callback per eventID.  But when there are hundreds of domains
or networks coupled and multiple conections, then sending every
event to every connection that wants an event, even for the
connections that only care about events for a particular object,
is inefficient.  In order to track more than one callback in the
server, we need to store callbacks by more than just their
eventID.  This patch rearranges the daemon side to store network
callbacks in a dynamic array, which can eventually be used for
multiple callbacks of the same eventID, although actual behavior
is unchanged without further patches to the RPC protocol.  For
ease of review, domain events are saved for a later patch, as
they touch more code.

While at it, fix a bug where a malicious client could send a
negative eventID to cause network event registration to access
outside of array bounds (thankfully not a CVE, since domain
events were already doing the bounds check, and since network
events have not been released).

* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
network events.
* daemon/remote.c (daemonClientEventCallback): New struct.
(remoteEventCallbackFree): New function.
(remoteClientInitHook, remoteRelayNetworkEventLifecycle)
(remoteClientFreeFunc)
(remoteDispatchConnectNetworkEventRegisterAny): Track network
callbacks differently.
(remoteDispatchConnectNetworkEventDeregisterAny): Enforce bounds.
Signed-off-by: NEric Blake <eblake@redhat.com>

into remoteDispatchObjectEventSend as it will later be used for both
the domain and network events.