- 16 2月, 2010 4 次提交
-
-
由 Stefan Berger 提交于
This part adds support for qemu making a macvtap tap device available via file descriptor passed to qemu command line. This also attempts to tear down the macvtap device when a VM terminates. This includes support for attachment and detachment to/from running VM. * src/qemu/qemu_conf.[ch] src/qemu/qemu_driver.c: add support in the QEmu driver
-
由 Stefan Berger 提交于
This part adds the helper code to setup and tear down macvtap devices using direct communication with the device driver via netlink sockets. The rather short messages received from the netlink layer are now written into a dynamically allocated buffer * src/util/macvtap.h src/util/macvtap.c: provides the new module * po/POTFILES.in: the module contains translated strings
-
由 Stefan Berger 提交于
This part adds support to domain_conf.{c|h} for parsing the new interface XML of type 'direct'. The parsed mode is now stored as an int. * src/conf/domain_conf.c src/conf/domain_conf.h: extend parsing code * src/util/macvtap.h: empty header to not break compilation
-
由 Stefan Berger 提交于
This patch adds build support for libvirt checking for certain contents of /usr/include/linux/if_link.h to see whether macvtap support is compilable on that system. One can disable macvtap support in libvirt via --without-macvtap passed to configure. * configure.ac src/Makefile.am: new build support * src/libvirt_macvtap.syms: list of exported symbols * src/util/macvtap.c: empty module to not break compilation
-
- 15 2月, 2010 2 次提交
-
-
由 Matthias Bolte 提交于
The open function returned -1 in case of an error, but -1 maps to VIR_DRV_OPEN_DECLINED instead of VIR_DRV_OPEN_ERROR.
-
由 Matthias Bolte 提交于
The virRaiseError macro inside of virSecurityReportError expands to virRaiseErrorFull and includes the __FILE__, __FUNCTION__ and __LINE__ information. But this three values are always the same for every call to virSecurityReportError and do not reflect the actual error context. Converting virSecurityReportError into a macro results in getting the correct __FILE__, __FUNCTION__ and __LINE__ information.
-
- 13 2月, 2010 4 次提交
-
-
由 Daniel P. Berrange 提交于
Current PCI addresses are allocated at time of VM startup. To make them truely persistent, it is neccessary to do this at time of virDomainDefine/virDomainCreate. The code in qemuStartVMDaemon still remains in order to cope with upgrades from older libvirt releases * src/qemu/qemu_driver.c: Rename existing qemuAssignPCIAddresses to qemuDetectPCIAddresses. Add new qemuAssignPCIAddresses which does auto-allocation upfront. Call qemuAssignPCIAddresses from qemuDomainDefine and qemuDomainCreate to assign PCI addresses that can then be persisted. Don't clear PCI addresses at shutdown if they are intended to be persistent
-
由 Daniel P. Berrange 提交于
If giving a lxc:// URI instead of lxc:/// the open method would crash ona NULL pointer * src/lxc/lxc_driver.c: Cope with a NULL URI path
-
由 Daniel P. Berrange 提交于
* src/util/hostusb.c: The device path for a USB device wants the bus/device IDs in decimal not octal
-
由 Daniel P. Berrange 提交于
The old text mode monitor prompts for a password when disks are encrypted. This interactive approach doesn't work for JSON mode monitor. Thus there is a new 'block_passwd' command that can be used. * src/qemu/qemu_driver.c: Split out code for looking up a disk secret from findVolumeQcowPassphrase, into a new method getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also set the disk encryption password via the monitor * src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add support for the 'block_passwd' monitor command.
-
- 12 2月, 2010 11 次提交
-
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
-
由 Jiri Denemark 提交于
Baseline CPU is the best CPU which can be used for a guest on any of the hosts.
-
由 Matthias Bolte 提交于
Broken by the latest commits to remove the virConnectPtr parameter from internal functions.
-
由 Jim Meyering 提交于
Since c26cb923, the dname parameter has been ignored by these two functions. Use it. * src/qemu/qemu_driver.c (qemudDomainMigratePrepareTunnel): Honor dname parameter once again. (qemudDomainMigratePrepare2): Likewise.
-
由 Jim Meyering 提交于
* src/conf/storage_conf.c (virStoragePoolDefParseSourceString): * src/storage/storage_backend_fs.c: (virStorageBackendFileSystemNetFindPoolSourcesFunc): (virStorageBackendFileSystemNetFindPoolSources): * src/test/test_driver.c (testStorageFindPoolSources):
-
- 11 2月, 2010 5 次提交
-
-
由 Jim Meyering 提交于
* src/remote/remote_driver.c (doRemoteOpen): Don't leak a qparam_set buffer upon OOM error.
-
由 Jiri Denemark 提交于
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Jiri Denemark 提交于
All other libvirt functions use array first and then number of elements in that array. Let's make cpuDecode follow this rule. Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
-
由 Chris Lalancette 提交于
Signed-off-by: NChris Lalancette <clalance@redhat.com>
-
由 Daniel P. Berrange 提交于
With QEMU >= 0.12 the host and guest side of disks no longer have the same naming convention. Specifically the host side will now get a 'drive-' prefix added to its name. The 'info blockstats' monitor command returns the host side name, so it is neccessary to strip this off when looking up stats since libvirt stores the guest side name ! * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix string to a defined constant * src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip off 'drive-' prefix (if found) when looking up disk stats
-
- 10 2月, 2010 14 次提交
-
-
由 Cole Robinson 提交于
Currently the timeout for reading startup output is 3 seconds. If the host is under any sort of load, we can easily trigger this. Lets bump it to 30 seconds. Since the polling loop checks to see if the process has died, we shouldn't erroneously hit this timeout if qemu bombs (only if it is stuck in some infinite loop).
-
由 Cole Robinson 提交于
The timeout errors were unconditionally being overwritten by the less helpful 'unable to start guest' error.
-
由 Cole Robinson 提交于
Having some value in capabilities helps testing this stuff in virt-manager.
-
由 Daniel P. Berrange 提交于
Use the ATTRIBUTE_NONNULL annotation to mark some virConnectPtr args as mandatory non-null so the compiler can warn of mistakes * src/conf/domain_event.h: All virConnectPtr args must be non-null * src/qemu/qemu_conf.h: qemudBuildCommandLine and qemudNetworkIfaceConnect() must be given non-null connection * tests/qemuxml2argvtest.c: Provide a non-null (dummy) connection to qemudBuildCommandLine()
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in secret_conf.{h,c} and update all callers to match
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in interface_conf.{h,c} and update all callers to match
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in cpu_conf.{h,c} and update all callers to match
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in storage_conf.{h,c} and storage_encryption_conf.{h,c} and update all callers to match
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in node_device_conf.{h,c} and update all callers to match
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in network_conf.{h,c} and update all callers to match
-
由 Daniel P. Berrange 提交于
All callers now pass a NULL virConnectPtr into the USB/PCi device iterator functions. Therefore the virConnectPtr arg can now be removed from these functions * src/util/hostusb.h, src/util/hostusb.c: Remove virConnectPtr from usbDeviceFileIterate * src/util/pci.c, src/util/pci.h: Remove virConnectPtr arg from pciDeviceFileIterate * src/qemu/qemu_security_dac.c, src/security/security_selinux.c: Update to drop redundant virConnectPtr arg
-
由 Daniel P. Berrange 提交于
* src/qemu/qemu_conf.c: Fix ',' vs '.' typo in floppy disk arg
-
由 Daniel P. Berrange 提交于
The QEMU flags are commonly stored as a signed or unsigned int, allowing only 31 flags. This limit is rather close, so to aid future patches, change it to a 64-bit int * src/qemu/qemu_conf.c, src/qemu/qemu_conf.h, src/qemu/qemu_driver.c, tests/qemuargv2xmltest.c, tests/qemuhelptest.c, tests/qemuxml2argvtest.c: Use 'unsigned long long' for QEMU flags
-
由 Daniel P. Berrange 提交于
The virConnectPtr is no longer required for error reporting since that is recorded in a thread local. Remove use of virConnectPtr from all APIs in security_driver.{h,c} and update all callers to match
-