Imagine that this function is called twice over the same disk
source. While in the first run all allocated memory is freed, not
all pointers are set to NULL (e.g. def->srcpool). So when called
again, these poitners are freed again resulting in double free.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
(cherry picked from commit 349badbf)

Jumping to "endjob" label from a code after this label is not a very
good idea.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
(cherry picked from commit d658c859)

After restart of libvirtd the 'checkPool' method is supposed to validate
that the pool is online. Since libvirt then refreshes the pool contents
anyways just return whether the pool was supposed to be online so that
the code can be reached. This is necessary since if a pool does not
implement the method it's automatically considered as inactive.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436065
(cherry picked from commit a200ebbc)

qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
(cherry picked from commit 4661a186)

On any failure, call virJSONValueFree for the *Props.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
(cherry picked from commit 2e8c6095)

Initialize stack variable to {0}
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
(cherry picked from commit 83c58ea3)

The native gluster pool source list data differs from the data used for
attaching gluster volumes as netfs pools. Currently the only difference
was the format. Since native pools don't use it and later there will be
more differences add a more deterministic way to switch between the
types instead.

(cherry picked from commit a92160db)

Similar to commit b202c39a ignore the warning that breaks the build
with clang:
util/virnetlink.c:365:52: error: cast from 'char *' to 'struct nlmsghdr *'
 increases required alignment from 1 to 4 [-Werror,-Wcast-align]
        for (msg = resp; NLMSG_OK(msg, len); msg = NLMSG_NEXT(msg, len)) {
                                                   ^~~~~~~~~~~~~~~~~~~~
/usr/include/linux/netlink.h:87:7: note: expanded from macro 'NLMSG_NEXT'
         (struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

(cherry picked from commit 04be4111)

Vcpu order is required to stay sequential. Clear the order on cpu
coldplug to avoid issues with removing vcpus out of sequence.

(cherry picked from commit b416a33a)

'next' is declared as 'ssize_t' so use '%zd'

(cherry picked from commit 86d69c30)

Buggy condition meant that vcpu0 would not be iterated in the checks.
Since it's not hotpluggable anyways we would not be able to break the
configuration of a live VM.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1437013
(cherry picked from commit 315f443d)

Like all devices, add the 'id' option for mdevs as well. Patch also
adjusts the test accordingly.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1438431Signed-off-by: NErik Skultety <eskultet@redhat.com>
(cherry picked from commit c3272e5e)

https://bugzilla.redhat.com/show_bug.cgi?id=1371892

The 'capacity' value (e.g. guest logical size) for a LUKS volume is
smaller than the 'physical' value of the file in the file system, so
we need to account for that.

When peeking at the encryption information about the volume add a fetch
of the payload_offset which is described as the offset to the start of
the volume data (in 512 byte sectors) in QEMU's QCryptoBlockLUKSHeader.

Then adjust the ->capacity appropriately when we determine that the
volume target encryption has a payload_offset value.

(cherry picked from commit b7d44f45)

Add check for more than one RTA_OIF, even though this is rather
unlikely.

Get rid of the buggy switch / break as this code won't need to
handle more attributes.

Use VIR_WARNINGS_NO_CAST_ALIGN to fix impossible to fix
util/virnetdevip.c:560:17: error: cast increases required alignment of target type [-Werror=cast-align]

(cherry picked from commit b202c39a)

If a transient storage pool is deemed inactive after libvirtd restart it
would not be deleted from the list. Reuse virStoragePoolUpdateInactive
along with a refactor necessary to properly update the state.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1242801
(cherry picked from commit f3a8e80c)

After a pool is made inactive the definition objects need to be updated
(if a new definition is prepared) and transient pools need to be
completely removed. Split out the code doing these steps into a separate
function for later reuse.

(cherry picked from commit aced6b23)

When registering a storage poll backend, the code would use
virStorageTypeToString instead of virStoragePoolTypeToString. The
following message would be logged:

virDriverLoadModuleFunc:71 : Lookup function 'virStorageBackendSCSIRegister'
virStorageBackendRegister:174 : Registering storage backend '(null)'
(cherry picked from commit 894133a3)

The problem resides in virHostdevUpdateActiveMediatedDevices which gets
called during qemuProcessReconnect. The issue here is that
virMediatedDeviceListAdd takes a pointer to the item to be added to the
list to which VIR_APPEND_ELEMENT is used, which also clears the pointer.
However, in this case only the local copy of the pointer got cleared,
leaving the original pointing to valid memory. To sum it up, during
cleanup phase, the original pointer is freed and the daemon crashes
basically any time it would access it.

Backtrace:
0x00007ffff3ccdeba in __strcmp_sse2_unaligned
0x00007ffff72a444a in virMediatedDeviceListFindIndex
0x00007ffff7241446 in virHostdevReAttachMediatedDevices
0x00007fffc60215d9 in qemuHostdevReAttachMediatedDevices
0x00007fffc60216dc in qemuHostdevReAttachDomainDevices
0x00007fffc6046e6f in qemuProcessStop
0x00007fffc6091596 in processMonitorEOFEvent
0x00007fffc6091793 in qemuProcessEventHandler
0x00007ffff7294bf5 in virThreadPoolWorker
0x00007ffff7294184 in virThreadHelper
0x00007ffff3fdc3c4 in start_thread () from /lib64/libpthread.so.0
0x00007ffff3d269cf in clone () from /lib64/libc.so.6

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446455

(cherry picked from commit 92e30a4d)
Signed-off-by: NErik Skultety <eskultet@redhat.com>

Use a local variable to hold data, rather than accessing the pointer
after calling virMediatedDeviceListAdd (therefore VIR_APPEND_ELEMENT).
Although not causing an issue at the moment, this change is a necessary
prerequisite for tweaking virMediatedDeviceListAdd in a separate patch,
which will take a reference for the source pointer (instead of pointer
value) and will clear it along the way.

(cherry picked from commit 2739a983)
Signed-off-by: NErik Skultety <eskultet@redhat.com>

qemuProcessVerifyHypervFeatures is supposed to check whether all
requested hyperv features were actually honored by QEMU/KVM. This is
done by checking the corresponding CPUID bits reported by the virtual
CPU. In other words, it doesn't work for string properties, such as
VIR_DOMAIN_HYPERV_VENDOR_ID (there is no CPUID bit we could check). We
could theoretically check all 96 bits corresponding to the vendor
string, but luckily we don't have to check the feature at all. If QEMU
is too old to support hyperv features, the domain won't even start.
Otherwise, it is always supported.

Without this patch, libvirt refuses to start a domain which contains

  <features>
    <hyperv>
      <vendor_id state='on' value='...'/>
    </hyperv>
  </features>

reporting internal error: "unknown CPU feature __kvm_hv_vendor_id.

This regression was introduced by commit v3.1.0-186-ge9dbe701, which
(by fixing the virCPUDataCheckFeature condition in
qemuProcessVerifyHypervFeatures) revealed an old bug in the feature
verification code. It's been there ever since the verification was
implemented by commit v1.3.3-rc1-5-g95bbe4bf, which effectively did not
check VIR_DOMAIN_HYPERV_VENDOR_ID at all.

https://bugzilla.redhat.com/show_bug.cgi?id=1439424Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
(cherry picked from commit ae102b5d)

(cherry picked from commit 609cc5a8)
Signed-off-by: NMartin Kletzander <mkletzan@redhat.com>

* docs/news.xml: update for release
* po/*.po*: regenerated

USB tables -> USB tablet.

that is: s/hyperyVerifyResponse/hypervVerifyResponse/

https://bugzilla.redhat.com/show_bug.cgi?id=1389313Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

There was an unhandled 'open' call which resulted in:

"error: Library function returned error but did not set virError"

Even if this happens during the daemon's start when we still don't have
any set of outputs defined yet, we can safely report an error, since we
automatically fallback to stderr which is fine even for both
running as a daemonized process, since this happens before the daemon
forks into the background, and running as a systemd service, since
systemd re-directs std outputs to journald by default.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1436060Signed-off-by: NErik Skultety <eskultet@redhat.com>

After the release it's necessary to add a new <release> section for the
upcoming release. Add a template so that it does not have to be
compiled over and over again.

In 9e246583 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

CPU features which change their value from disabled to enabled between
two calls to query-cpu-model-expansion (the first with no extra
properties set and the second with 'migratable' property set to false)
can be marked as enabled and non-migratable in qemuMonitorCPUModelInfo.

Since the code consuming qemuMonitorCPUModelInfo currently ignores the
migratable flag, this change is effectively changing the CPU model
advertised in domain capabilities to contain all features (even those
which block migration). And this matches what we do for QEMU older than
2.9.0, when we detect all CPUID bits ourselves without asking QEMU.

As a result of this change

    <cpu mode='host-model'>
      <feature name='invtsc' policy='require'/>
    </cpu>

will work with all QEMU versions. Such CPU definition would be forbidden
with QEMU >= 2.9.0 without this patch.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>

 - Add a news entry
 - Update the driver page with documentation of the new options
   and some examples

When idx is 0 virStorageFileChainLookup returns the base (bottom) of the
backing chain rather than the top. This is expected by the callers of
qemuDomainGetStorageSourceByDevstr.

Add a special case for idx == 0

Since commit fcbbb289 we steal the pointer to the storage pool
source name if there was no pool name specified.

Properly duplicate the string to avoid freeing it twice.

https://bugzilla.redhat.com/show_bug.cgi?id=1436400

Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set
allow omitting the <name> element and instead fill out the pool name
from the <source><name> element.

Relax the schema to make <name> optional for these pools.
Expressing that at least one of these is required is out of scope
of the schema.

One of the problems with our virGetDomain function is that it
copies just domain name and domain UUID. Therefore it's very
easy to forget aboud domain ID. This can cause some bugs, like
virConnectGetAllDomainStats not reporting proper domain IDs.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1434882

Imagine the following scenario:

1) virsh net-start default
2) virsh start myFavouriteDomain
3) virsh net-destroy default
4) virsh destroy myFavouriteDomain

(assuming myFavouriteDomain has an interface from default
network)

Regardless of how unlikely this scenario looks like, we should
not crash. The problem is, on net-destroy in
networkShutdownNetworkVirtual() the virMacMap module is unrefed,
but the stale pointer is kept around. Thus when the domain
destroy procedure comes in, networkReleaseActualDevice() and
subsequently networkMacMgrDel() is called. This function sees the
stale pointer and starts calling the virMacMap module APIs which
work over freed memory.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Mention the hyperv notifier and the new API to set block thresholds.

https://bugzilla.redhat.com/show_bug.cgi?id=1398087

Clean up the virsh man page description for --pool-create-as in order
to better describe how the various arguments are used when creating
(or defining) a logical pool.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

This reverts commit ca4515d2
which also included a functional change that broke logical storage pools
not named after their volume groups.