When starting a container, newDef is initialized to a
copy of 'def', but when startup fails newDef is never
removed. This cause later attempts to use 'virDomainDefine'
to lose the new data being defined.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

A mistaken initialization of 'ret' caused failure to create
macvtap devices to be ignored. The libvirt_lxc process
would later fail to start due to missing devices

Also make sure code checks '< 0' and not '!= 0' since only
-1 is considered an error condition
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If the <interface> device did not contain any <target>
element, LXC would crash on a NULL pointer if starting
the container failed
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

The initpid will be required long term to enable LXC to
implement various hotplug operations. Thus it needs to be
persisted in the domain status XML. LXC has not used the
domain status XML before, so this introduces use of the
helpers.

Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Currently the LXC driver logs audit messages when a container
is started or stopped. These audit messages, however, contain
the PID of the libvirt_lxc supervisor process. To enable
sysadmins to correlate with audit messages generated by
processes /inside/ the container, we need to include the
container init process PID.

We can't do this in the main 'start' audit message, since
the init PID is not available at that point. Instead we output
a completely new audit record, that lists both PIDs.

type=VIRT_CONTROL msg=audit(1353433750.071:363): pid=20180 uid=0 auid=501 ses=3 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 msg='virt=lxc op=init vm="busy" uuid=dda7b947-0846-1759-2873-0f375df7d7eb vm-pid=20371 init-pid=20372 exe="/home/berrange/src/virt/libvirt/daemon/.libs/lt-libvirtd" hostname=? addr=? terminal=pts/6 res=success'
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Depending on the scenario in which LXC containers exit, it is
possible for the EOF callback of the LXC monitor to deadlock
the driver.

  #0  0x00000038a0a0de4d in __lll_lock_wait () from /lib64/libpthread.so.0
  #1  0x00000038a0a09ca6 in _L_lock_840 () from /lib64/libpthread.so.0
  #2  0x00000038a0a09ba8 in pthread_mutex_lock () from /lib64/libpthread.so.0
  #3  0x00007f4bd9579d55 in virMutexLock (m=<optimized out>) at util/threads-pthread.c:85
  #4  0x00007f4bcacc7597 in lxcDriverLock (driver=0x7f4bc40c8290) at lxc/lxc_conf.h:81
  #5  virLXCProcessMonitorEOFNotify (mon=<optimized out>, vm=0x7f4bb4000b00) at lxc/lxc_process.c:581
  #6  0x00007f4bd9645c91 in virNetClientCloseLocked (client=client@entry=0x7f4bb4009e60)
      at rpc/virnetclient.c:554
  #7  0x00007f4bd96460f8 in virNetClientIOEventLoopPassTheBuck (thiscall=0x0, client=0x7f4bb4009e60)
      at rpc/virnetclient.c:1306
  #8  virNetClientIOEventLoopPassTheBuck (client=0x7f4bb4009e60, thiscall=0x0)
      at rpc/virnetclient.c:1287
  #9  0x00007f4bd96467a2 in virNetClientCloseInternal (reason=3, client=0x7f4bb4009e60)
      at rpc/virnetclient.c:589
  #10 virNetClientCloseInternal (client=0x7f4bb4009e60, reason=3) at rpc/virnetclient.c:561
  #11 0x00007f4bcacc4a82 in virLXCMonitorClose (mon=0x7f4bb4000a00) at lxc/lxc_monitor.c:201
  #12 0x00007f4bcacc55ac in virLXCProcessCleanup (reason=<optimized out>, vm=0x7f4bb4000b00,
      driver=0x7f4bc40c8290) at lxc/lxc_process.c:240
  #13 virLXCProcessStop (driver=0x7f4bc40c8290, vm=vm@entry=0x7f4bb4000b00,
      reason=reason@entry=VIR_DOMAIN_SHUTOFF_DESTROYED) at lxc/lxc_process.c:735
  #14 0x00007f4bcacc5bd2 in virLXCProcessAutoDestroyDom (payload=<optimized out>,
      name=0x7f4bb4003c80, opaque=0x7fff41af2df0) at lxc/lxc_process.c:94
  #15 0x00007f4bd9586649 in virHashForEach (table=0x7f4bc409b270,
      iter=iter@entry=0x7f4bcacc5ab0 <virLXCProcessAutoDestroyDom>, data=data@entry=0x7fff41af2df0)
      at util/virhash.c:514
  #16 0x00007f4bcacc52d7 in virLXCProcessAutoDestroyRun (driver=driver@entry=0x7f4bc40c8290,
      conn=conn@entry=0x7f4bb8000ab0) at lxc/lxc_process.c:120
  #17 0x00007f4bcacca628 in lxcClose (conn=0x7f4bb8000ab0) at lxc/lxc_driver.c:128
  #18 0x00007f4bd95e67ab in virReleaseConnect (conn=conn@entry=0x7f4bb8000ab0) at datatypes.c:114

When the driver calls virLXCMonitorClose, there is really no
need for the EOF callback to be invoked in this case, since
the caller can easily handle events itself. In changing this,
the monitor needs to take a deep copy of the callback list,
not merely a reference.

Also adds debug statements in various places to aid
troubleshooting
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Asynchronously setting priv->mon to NULL was pointless,
just remove the destroy callback entirely.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Remove custom reference counting from virLXCMonitor, using
virObject instead
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/

This bug was revealed by the crash described in

  https://bugzilla.redhat.com/show_bug.cgi?id=852383

The vlan info pointer sent to virNetDevOpenvswitchAddPort should never
be non-NULL unless there is at least one tag. The factthat such a vlan
info pointer was receveid pointed out that a caller was passing the
wrong pointer. Instead of sending &net->vlan, the result of
virDomainNetGetActualVlan(net) should be sent - that function will
look for vlan info in net->data.network.actual->vlan, and in cany case
return NULL instead of a pointer if the vlan info it finds has no
tags.

Aside from causing the crash, sending a hardcoded &net->vlan has the
effect of ignoring vlan info from a <network> or <portgroup> config.

This patch updates the structures that store information about each
domain and each hypervisor to support multiple security labels and
drivers. It also updates all the remaining code to use the new fields.
Signed-off-by: NMarcelo Cerri <mhcerri@linux.vnet.ibm.com>

Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.
Signed-off-by: NKyle Mestery <kmestery@cisco.com>

Switch virDomainObjPtr to use the virObject APIs for reference
counting. The main change is that virObjectUnref does not return
the reference count, merely a bool indicating whether the object
still has any refs left. Checking the return value is also not
mandatory.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

If an LXC container is using a virtual network and that network
is not active, currently the user gets a rather unhelpful
error message about tap device setup failure. Add an explicit
check for whether the network is active, in exactly the same
way as the QEMU driver

The reboot() syscall is allowed by new kernels for LXC containers.
The LXC controller can detect whether a reboot was requested
(instead of a normal shutdown) by looking at the "init" process
exit status. If a reboot was triggered, the exit status will
record SIGHUP as the kill reason.

The LXC controller has cleared all its capabilities, and the
veth network devices will no longer exist at this time. Thus
it cannot restart the container init process itself. Instead
it emits an event which is picked up by the LXC driver in
libvirtd. This will then re-create the container, using the
same configuration as it was previously running with (ie it
will not activate 'newDef').
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

This defines a new RPC protocol to be used between the LXC
controller and the libvirtd LXC driver. There is only a
single RPC message defined thus far, an asynchronous "EXIT"
event that is emitted just before the LXC controller process
exits. This provides the LXC driver with details about how
the container shutdown - normally, or abnormally (crashed),
thus allowing the driver to emit better libvirt events.

Emitting the event in the LXC controller requires a few
little tricks with the RPC service. Simply calling the
virNetServiceClientSendMessage does not work, since this
merely queues the message for asynchronous processing.
In addition the main event loop is no longer running at
the point the event is emitted, so no I/O is processed.

Thus after invoking virNetServiceClientSendMessage it is
necessary to mark the client as being in "delayed close"
mode. Then the event loop is run again, until the client
completes its close - this happens only after the queued
message has been fully transmitted. The final complexity
is that it is not safe to run virNetServerQuit() from the
client close callback, since that is invoked from a
context where the server is locked. Thus a zero-second
timer is used to trigger shutdown of the event loop,
causing the controller to finally exit.

* src/Makefile.am: Add rules for generating RPC protocol
  files and dispatch methods
* src/lxc/lxc_controller.c: Emit an RPC event immediately
  before exiting
* src/lxc/lxc_domain.h: Record the shutdown reason
  given by the controller
* src/lxc/lxc_monitor.c, src/lxc/lxc_monitor.h: Register
  RPC program and event handler. Add callback to let
  driver receive EXIT event.
* src/lxc/lxc_process.c: Use monitor exit event to decide
  what kind of domain event to emit
* src/lxc/lxc_protocol.x: Define wire protocol for LXC
  controller monitor.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Move the code that handles the LXC monitor out of the
lxc_process.c file and into lxc_monitor.{c,h}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update the LXC driver to use the virNetClient APIs for
connecting to the libvirt_lxc monitor, instead of the
low-level socket APIs. This is a step towards running
a full RPC protocol with libvirt_lxc
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Update all LXC code to use virReportError instead of the custom
lxcError macro
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Rename the lxc_driver_t struct typedef to virLXCDriver to more
closely follow normal libvirt naming conventions
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For consistency all the APIs in the lxc_domain.c file should
have a virLXCDomain prefix in their name
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

For consistency all the APIs in the lxc_process.c file should
have a virLXCProcess prefix in their name
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c

Move all the code that manages stop/start of LXC processes
into separate lxc_process.{c,h} file to make the lxc_driver.c
file smaller
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>