qemuMonitorGetIOThreads returns a NULL-terminated list even when 0
iothreads are present. The caller didn't perform cleanup if there were 0
iothreads leaking the array.

https://bugzilla.redhat.com/show_bug.cgi?id=1804548

Fixes: d1eac927Reported-by: NJing Yan <jiyan@redhat.com>
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Relevant code seems to treat forward modes 'route', 'nat', 'open' and 'none'
the same but documentation hasn't reflected that so far.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

To fix the actual bug, it was necessary to make networkPlugBandwidth() be
called also for 'bridge'-type networks implemented using macvtap's 'bridge'
mode (previously it was only called for those implemented on top of an
existing bridge).

However, it seems beneficial to call it for other network types as well, at
least because it removes an inconsistency in types of bandwidth configuration
changes permissible in inactive and active domain configs.  It should also be
safe as the function pretty much amounts to NOP if no QoS is requested and the
new behaviour should not be any worse than before if it is.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

Even if an interface of type 'network', setting 'floor' is only supported
if the network's forward type is nat, route, open or none.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

QoS 'floor' setting is documented to be only supported for interfaces of
type 'network'.  Fail with an error message on attempt to set 'floor' on
an interface of any other type.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

This compound condition will be useful in several places so it
makes sense to give it a name for better readability.
Signed-off-by: NPavel Mores <pmores@redhat.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NMichal Privoznik <mprivozn@redhat.com>

If the parsed 'raw' format JSON string has 'offset' or 'size' attributes
parse them as the format slice.

https://bugzilla.redhat.com/show_bug.cgi?id=1791788Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implement support for the slice of type 'storage' which allows to set
the offset and size which modifies where qemu should look for the start
of the format container inside the image.

Since slicing is done using the 'raw' driver we need to add another
layer into the blockdev tree if there's any non-raw image format driver
used to access the data.

This patch adds the blockdev integration and setup of the image data so
that we can use the slices for any backing image.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Add a set of test data to see whether the backing store strings are
formatted reasonably. Note that we don't support direct creation of such
images so those tests are not enabled.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

When creating overlay images e.g. for snapshots or when merging
snapshots we often specify the backing store string to use. Make the
formatter aware of backing chain entries which have a <slice>
configured so that we record it properly. Otherwise such images
would not work without the XML (when detecting the backing chain).
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The storage slice will require a specific node name in cases when the
image format is not raw. Store and format them in the status XML.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Implement parsing and formatting of the 'storage' slice.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We are going to add support for specifying offset and size attributes
which will allow controling where the image and where the guest data
itself starts in the source of the disk. This will be represented by
a <slices> element filled with either a <slice type='storage'> for the
offset of the image format data.

Add the XML documentation and RNG schema.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Specifically creating such images via libvirt during blockjobs would
be much more hassle than it's worth. Just forbid them for now.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We support explicit storage slices only when using blockdev. Storage
slices expressed via the backing store string are left to qemu to
open correctly.

Reject storage slices configured via the XML for non-blockdev usage.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If we have a 'format' type slice for a raw driver we can directly format
the values.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduce virStorageSourceSlice which will store the 'offset' and 'size'
of a virStorageSource and declare it as 'sliceStorage' and 'sliceFormat'
attributes of a virStorageSource.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

QEMU allows specifying the offset and size into a raw file to expose a
sub-slice of the image to the guest with the raw driver. Libvirt
currently doesn't support it but we can add test case for future
reference.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Use virXMLFormatElement to simplify the logic.
Signed-off-by: NPeter Krempa <pkrempa@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

If a domain has a NVMe disk it already has the access configured.
Trying to configure it again on a commit or some other operation
is wrong and condemned to failure.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Its behavior is controlled by a KVM-specific CPU feature.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Its use is limited to certain guest types, and it only supports
a subset of all possible tick policies.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We will use this capability to detect whether the QEMU binary
supports the kvm-no-adjvtime CPU feature.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Make sure we are taking all possible virDomainTimerNameType values
into account. This will make upcoming changes easier.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NMasayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Libvirt switched to using a UNIX socket for monitors in
2009 for version 0.7.0. It seems unlikely that there is
a running QEMU process that hasn't been restarted for
11 years while also taking a libvirt upgrade. Therefore
we can drop support for opening a PTY for the QEMU
monitor.
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

On FreeBSD 12 the default ulimit settings allow for 100,000
open file descriptors. As a result spawning processes in
libvirt is abominably slow. Fortunately FreeBSD has long
since provided a good solution in the form of closefrom(),
which closes all FDs equal to or larger than the specified
parameter.
Reviewed-by: NJán Tomko <jtomko@redhat.com>
Signed-off-by: NDaniel P. Berrangé <berrange@redhat.com>

When emulating smartcard with host certificates, qemu needs to
be able to read the certificates files. Add necessary code to
add the smartcard certificates file path to the apparmor profile.

Passthrough support has been tested with spicevmc and remote-viewer.

v2:
- Fix CodingStyle
- Add support for 'host' case.
- Add a comment to mention that the passthrough case doesn't need
  some configuration
- Use one rule with '{,*}' instead of two rules.
Signed-off-by: NArnaud Patard <apatard@hupstream.com>
Reviewed-by: NCole Robinson <crobinso@redhat.com>
Acked-by: NChristian Ehrhardt <christian.ehrhardt@canonical.com>

Users expect to be able to configure the <console> element and see
that configuration reflected into the <serial> element or at least
sticking, however due to our crazy back-compat code that doesn't
always happen.

There's really not much we can do to make this kind of corner cases
work as the user would expect, especially not without introducing
additional complexity in a part of libvirt that already has more
than a fair share of it; we can, however, improve the documentation
so that it will nudge said users in the right direction.

https://bugzilla.redhat.com/show_bug.cgi?id=1770725Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Our virCommand helper API already has the ability to capture
program output, there's no need to open-code it.

Apart from simplifying the code, the test is marginally faster
due to recent improvements in virCommandMassClose.

Until now, both stderr and stdout were stored in the same buffer.
This change stores stderr separately and expects it to be empty
for all the tests we currently run.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Use g_autofree and get rid of the cleanup label.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

The cleanups made some labels redundant.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Use g_autoptr where possible.

virTestCapsBuildNUMATopology is not converted completely,
because while the VIR_FREE call on cell_cpus is technically
wrong, neither VIR_ALLOC_N nor virBitmapNew can return
an allocation error now so it is effectively dead code.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>

Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>