* Autotools changes:
  - Don't assume Qemu is Linux-only
  - Check Linux headers only on Linux
  - Disable firewalld on FreeBSD
* Initctl:
  Initctl seem to present only on Linux, so stub it on other platforms
* Raw I/O: Linux-only as well
* Headers cleanup

Based on a patch originally authored by Daniel De Graaf

  http://lists.xen.org/archives/html/xen-devel/2012-05/msg00565.html

This patch converts the Xen libxl driver to support only Xen >= 4.2.
Support for Xen 4.1 libxl is dropped since that version of libxl is
designated 'technology preview' only and is incompatible with Xen 4.2
libxl.  Additionally, the default toolstack in Xen 4.1 is still xend,
for which libvirt has a stable, functional driver.

Add a configure option --with-fuse to prepare introduction
of fuse support for libvirt lxc.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>

It may take some time for sanlock to add a lockspace. And if user
restart libvirtd service meanwhile, the fresh daemon can fail adding
the same lockspace with EINPROGRESS. Recent sanlock has
sanlock_inq_lockspace() function which should block until lockspace
changes state. If we are building against older sanlock we should
retry a few times before claiming an error. This issue can be easily
reproduced:

for i in {1..1000} ; do echo $i; service libvirtd restart; sleep 2; done
20
Stopping libvirtd daemon:                                  [FAILED]
Starting libvirtd daemon:                                  [  OK  ]
21
Stopping libvirtd daemon:                                  [  OK  ]
Starting libvirtd daemon:                                  [  OK  ]
22
Stopping libvirtd daemon:                                  [  OK  ]
Starting libvirtd daemon:                                  [  OK  ]

 error : virLockManagerSanlockSetupLockspace:334 : Unable to add
 lockspace /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__: Operation now in
 progress

* configure.ac docs/news.html.in libvirt.spec.in: update for the new release
* po/*.po*: update from transifex, a lot of added support e.g. Indian
  languages, and regenerate

When using --without-$name --without-secdriver-$name with $name being
selinux or apparmor, configure will fail saying that AppArmor/SELinux
development package must be installed.
This is caused by a small bug in --with-secdriver-$name handling in
configure.ac which treats --without-secdriver-$name when $name as if the
user had requested to enable $name when $name couldn't be detected on
the system.

This commit also makes sure the detection checks for disabled
secdrivers do not needlessly get run, especially as this could
cause an error as well in --with-$name --without-secdriver-$name
situations.

libvirt started using sanlock_killpath to implement on_lockfailure
action. Since sanlock_killpath was introduced in sanlock 2.4, libvirt
fails to build with older sanlock.

We are currently able to work only with non-translated SELinux
contexts, but we are using functions that work with translated
contexts throughout the code.  This patch swaps all SELinux context
translation relative calls with their raw sisters to avoid parsing
problems.

The problems can be experienced with mcstrans for example.  The
difference is that if you have translations enabled (yum install
mcstrans; service mcstrans start), fgetfilecon_raw() will get you
something like 'system_u:object_r:virt_image_t:s0', whereas
fgetfilecon() will return 'system_u:object_r:virt_image_t:SystemLow'
that we cannot parse.

I was trying to confirm that the _raw variants were here since the dawn of
time, but the only thing I see now is that it was imported together in
the upstream repo [1] from svn, so before 2008.

Thanks Laurent Bigonville for finding this out.

[1] http://oss.tresys.com/git/selinux.git

Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()

curl_global_init is not thread-safe. curl_easy_init might call
curl_global_init when it was no called before. But curl_easy_init
can be called from different threads by the ESX driver. Therefore,
call curl_global_init from virInitialize to stop curl_easy_init from
calling it.

Reported by Benjamin Wang.

The variable that is set in the script is with_dbus, not have_dbus.

Commit f6430390 broke builds on RHEL 5, where glibc (2.5) is too
old to support mkostemp (2.7) or htole64 (2.9).  While gnulib
has mkostemp, it still lacks htole64; and it's not worth dragging
in replacements on systems where journald is unlikely to exist
in the first place, so we just use an extra configure-time check
as our witness of whether to attempt compiling the code.

* src/util/logging.c (virLogParseOutputs): Don't attempt to
compile journald on older glibc.
* configure.ac (AC_CHECK_DECLS): Check for htole64.

Currently if you build on a machine that does not support SELinux we end up
with the default mount point being /selinux, since this is moved to
/sys/fs/selinux, we should start defaulting there.

I believe this is causing a bug in libvirt-lxc when /selinux does not exists,
even though /sys/fs/selinux exists.

In Xen 4.2, xs.h is deprecated in favor of xenstore.h.  xs.h now
contains

#warning xs.h is deprecated use xenstore.h instead
#include <xenstore.h>

which fails compilation when warnings are treated as errors.

Introduce a configure-time check for xenstore.h and if found,
use it instead of xs.h.

Commit 9298bfbc introduced code to detect if netcf is linked with
libnl1, and to prefer libnl1 over libnl3 when this is the case.
This behaviour can be disabled by setting LIBNL_CFLAGS to any value,
including the empty string.
However, configure.ac sets LIBNL_CFLAGS to "" before attempting
libnl detection, so the libnl1 detection code is always disabled.
This caused issues on my f17 system where netcf is linked with libnl1
but libvirt got built with libnl3.

This commit removes the setting of the LIBNL_* variables to "" as
this does not appear to be needed. After this change, libnl1 is
used when building libvirt on my f17 system.

* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update from transifex and regenerate

Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.

Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.

* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface

With this script you can run libvirt programs without needing to
install them first.  You just have to do for example:

  ./run ./tools/virsh [args ...]

If you are already in the tools/ subdirectory, then the following
command will also work:

  ../run ./virsh [...]

You can also run the C programs under valgrind like this:

  ./run valgrind [valgrind opts...] ./program

or under gdb:

  ./run gdb --args ./program

This also works with sudo (eg. if you need root access for libvirt):

  sudo ./run ./tools/virsh list --all

Derived from libguestfs and simplified.  The ./run script in
libguestfs is much more sophisticated:

https://github.com/libguestfs/libguestfs/blob/master/run.in

so we don't fail when libnetcf is built as multiarch lib.

Commit 9298bfbc changed configure to split the libnl into two
separate pkg config checks instead of nesting the second check
on the failure path of the first.  But the default pkg config
behavior is to abort configure if a check fails.  Since we have
a second check lined up, we need an explicit failure case that
does not abort if the first check fails.

Meanwhile, commit 51b708c6 is reverted.  It did not fix any
behavior, and in fact, introduced a regression to the fallback
case when the user explicitly sets $LIBNL_CFLAGS.

* configure.ac: Don't abort if libnl-3 is not found.

Pushed under build-breaker rule.

Recent spec file changes ensure that in distro situations, netcf
and libvirt will link against the same libnl in order to avoid
dumping core.  But for every-day development, if you use F17 and
have the libnl3-devel headers available, libvirt was blindly
linking against libnl3 even though F17 netcf still links against
libnl1, making testing a self-built binary on F17 impossible.

By making configure a little bit smarter, we can avoid this
situation - we merely skip the probe of libnl-3 if we can prove
that netcf is still using libnl-1.  I intentionally wrote the
test so that we still favor libnl-3 if netcf is not installed or
if we couldn't use ldd to determine things.

Defaults being what they are, someone will invariably complain
that our smarts were wrong.  Never fear - in that case, just run
./configure LIBNL_CFLAGS=..., where the fact that you set
LIBNL_CFLAGS (even to the empty string) will go back to probing
for libnl-3, regardless of netcf's choice.

* configure.ac (LIBNL): Don't probe libnl3 if netcf doesn't use it.

FreeBSD and OpenBSD have a <net/if.h> that is not self-contained;
and mingw lacks the header altogether.  But gnulib has just taken
care of that for us, so we might as well simplify our code.  In
the process, I got a syntax-check failure if we don't also take
the gnulib execinfo module.

* .gnulib: Update to latest, for execinfo and net_if.
* bootstrap.conf (gnulib_modules): Add execinfo and net_if modules.
* configure.ac: Let gnulib check for headers.  Simplify check for
'struct ifreq', while also including enough prereq headers.
* src/internal.h (IF_NAMESIZE): Drop, now that gnulib guarantees it.
* src/nwfilter/nwfilter_learnipaddr.h: Use correct header for
IF_NAMESIZE.
* src/util/virnetdev.c (includes): Assume <net/if.h> exists.
* src/util/virnetdevbridge.c (includes): Likewise.
* src/util/virnetdevtap.c (includes): Likewise.
* src/util/logging.c (includes): Assume <execinfo.h> exists.
(virLogStackTraceToFd): Handle gnulib's fallback implementation.

On OpenBSD, clock_gettime() exists in libc rather than librt, and
blindly linking with -lrt made the build fail.  Gnulib already
did the work for determining which libraries to use, so we should
reuse that work rather than doing it ourselves.

* bootstrap.conf (gnulib_modules): Pull in clock-time.
* configure.ac (RT_LIBS): Drop.
* src/Makefile.am (libvirt_util_la_LIBADD): Use gnulib variable
instead.
* src/util/virtime.c (includes): Simplify.

* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: pulled localization updates for sp,ja,mr,pa,uk,zh_CN,zh_TW
  and regenerated

* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po*: update localizations for zh_CN, uk, ja, pt_BR, as, sp, mr, zh_TW

We already skip out on building the LXC under RHEL 5, because the
kernel is too old (commits 4c18acff, 2dee8965); but commit 9612e4b2
moved some LXC-only code into common files, resulting in this
build failure:

util/virfile.c: In function 'virFileLoopDeviceAssociate':
util/virfile.c:580: error: 'LO_FLAGS_AUTOCLEAR' undeclared (first use in this function)

Unfortunately, the kernel folks only made it an enum, rather than
also a #define, so we have to modify configure.ac to record when
it is usable.

* configure.ac (with_lxc): Mark when LO_FLAGS_AUTOCLEAR was found.
* src/util/virfile.c (virFileLoopDeviceAssociate): Avoid
compilation when kernel is too old.

* configure.ac, spec file: firewalld defaults to enabled if dbus is
  available, otherwise is disabled. If --with_firewalld is explicitly
  requested and dbus is not available, configure will fail.

* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
  signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
  When these are encountered, reload all the iptables reuls of all
  libvirt's virtual networks (similar to what happens when libvirtd is
  restarted).

* iptables, ebtables: use firewall-cmd's direct passthrough interface
  when available, otherwise use iptables and ebtables commands. This
  decision is made once the first time libvirt calls
  iptables/ebtables, and that decision is maintained for the life of
  libvirtd.

* Note that the nwfilter part of this patch was separated out into
  another patch by Stefan in V2, so that needs to be revised and
  re-reviewed as well.

================

All the configure.ac and specfile changes are unchanged from Thomas'
V3.

V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient.  V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.

The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.

IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.

This one-time initialization works well. However, I've encountered
problems with testing:

1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)

2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).

3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.

4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.

This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.

This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.

Reading and writing of OpenSSH style "known_hosts" files is supported.

Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.

Commit 350583c8 broke development on a RHEL 5 box, where the
ancient Autoconf 2.59 lacks AS_VERSION_STRING.  Rather than
backport the complex awk script that newer autoconf uses for
true strverscmp comparisons from the shell, it was easier to
just open-code a shell case statement.

* configure.ac (qemu_version): Open-code a replacement for
AS_VERSION_CHECK.

The way LIBVIRT_VERSION_INFO is calculated has a timebomb that
will cause us to accidentally break soname when we change the
major version number to a non-zero value !

Given CURRENT:REVISION:AGE, libtool will generate

   libvirt.so.($CURRENT-$AGE).$AGE.$REVISION

We set CURRENT to be MAJOR+MINOR and AGE to $MINOR, so as
soon as MAJOR changes to non-zero, we get libvirt.so.1
as the soname, eg  1.3.9 would create libvirt.so.1.3.9
Looks natural but is not ABI compatible with libvirt.so.0.x.y

The fix is to set CURRENT to always be exactly the same
as AGE. We want to have the major version reflected in
the so symlinks though. So then we set AGE to MAJOR*1000+MINOR
eg, so 1.3.9 would create libvirt.so.0.1003.9 and libvirt
2.51.3 would create libvirt.so.0.2051.3

libvirt creates invalid commands if wrong locale is selected. For
example with locale that uses comma as a decimal point, JSON commands
created with decimal numbers are invalid because comma separates the
entries in JSON. Fortunately even when decimal point is affected,
thousands grouping is not, because for grouping to be enabled with
*printf, there has to be an apostrophe flag specified (and supported).

This patch adds specific internal function for converting doubles to
strings with C locale.

The recent changes to the testsuite to validate exported symbols
flushed out a case of unconditionally exporting symbols that
were only conditionally compiled under HAVE_AVAHI.

* src/Makefile.am (libvirt_net_rpc_server_la_SOURCES): Compile
virnetservermdns unconditionally.
* configure.ac (HAVE_AVAHI): Drop unused automake conditional.
* src/rpc/virnetservermdns.c: Add fallbacks when Avahi is not
present.

On Debian/Ubuntu, one of the libraries libvirt (indirectly) links
with exports a symbol named 'base64_encode'. This takes precedence
over GNULIB's base64_encode function during linking. Unfortunately
they of course have different API semantics. To avoid this problem
use a few #defines in config.h to rename the GNULIB provided
function to have a 'libvirt_gl_' prefix

There are a few issues with the current virAtomic APIs

 - They require use of a virAtomicInt struct instead of a plain
   int type
 - Several of the methods do not implement memory barriers
 - The methods do not implement compiler re-ordering barriers
 - There is no Win32 native impl

The GLib library has a nice LGPLv2+ licensed impl of atomic
ops that works with GCC, Win32, or pthreads.h that addresses
all these problems. The main downside to their code is that
the pthreads impl uses a single global mutex, instead of
a per-variable mutex. Given that it does have a Win32 impl
though, we don't expect anyone to seriously use the pthread.h
impl, so this downside is not significant.

* .gitignore: Ignore test case
* configure.ac: Check for which atomic ops impl to use
* src/Makefile.am: Add viratomic.c
* src/nwfilter/nwfilter_dhcpsnoop.c: Switch to new atomic
  ops APIs and plain int datatype
* src/util/viratomic.h: inline impls of all atomic ops
  for GCC, Win32 and pthreads
* src/util/viratomic.c: Global pthreads mutex for atomic
  ops
* tests/viratomictest.c: Test validate to validate safety
  of atomic ops.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Parallels Cloud Server is a cloud-ready virtualization
solution that allows users to simultaneously run multiple virtual
machines and containers on the same physical server.

More information can be found here: http://www.parallels.com/products/pcs/
Also beta version of Parallels Cloud Server can be downloaded there.
Signed-off-by: NDmitry Guryanov <dguryanov@parallels.com>

This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.
Signed-off-by: NSebastian Wiedenroth <wiedi@frubar.net>

See https://www.redhat.com/archives/libvir-list/2012-July/msg00493.html

Basically building against librbd doesn't seem to actually require -lcrypto.

Also report the rbd linker flags in configure output

* configure.ac docs/news.html.in libvirt.spec.in: new version and
  documentation update
* po/*.po*: updated and regenerated localizations