Commit bc6d3121 was far too terse when describing the new
elements, attributes, and allow values. Provide a few more
words to help describe.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

Signed-off-by: NShi Lei <shi_lei@massclouds.com>

virDomainDefCollectBootOrder() is called for every item on the list
for each type of device. One of the checks it makes is to gather the
order attributes from the <boot> element of all devices, and assure
that no two devices have been given the same order.

Since (internally to libvirt, *not* in the domain XML) an <interface
type='hostdev'> is on both the list of hostdev devices and the list of
network devices, it will be counted twice, and the code that checks
for multiple devices with the same boot order will give a false
positive.

To remedy this, we make sure to return early for hostdev devices that
have a parent.type != NONE.

This was introduced in commit 5b75a4, which was first in libvirt-4.4.0.

Resolves: https://bugzilla.redhat.com/1601318Signed-off-by: NLaine Stump <laine@laine.org>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

We require QEMU 1.5.0 these days, so checking for versions
older than that is pointless.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: NAndrea Bolognani <abologna@redhat.com>
Reviewed-by: NJán Tomko <jtomko@redhat.com>

Introduced by commit <af204232>.

Made redundant by commit 1e9a0837 which switched to using
qemuProcessCreatePretendCmd, where capabilities are filtered
in qemuProcessInit after being fetched from the cache.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit 0bdb7043 renamed the corresponding xml->argv tests,
but due to the optimistic nature of xml->startup xml testing,
this test was quietly skipped.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

Commit 77f51ab5 started parsing an copying the SEV capabilities,
but omitted the free call.
Signed-off-by: NJán Tomko <jtomko@redhat.com>

https://bugzilla.redhat.com/show_bug.cgi?id=1613737

When processing the inputvol for encryption, we need to handle
the case where the inputvol is encrypted. This then allows for
the encrypted inputvol to be used either for an output encrypted
volume or an output volume of some XML provided type.

Add tests to show the various conversion options when either input
or output is encrypted. This includes when both are encrypted.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 39cef12a altered/fixed the inputvol processing to create
a multistep process when using an inputvol to create an encrypted
output volume; however, it unnecessarily assumed/restricted the
inputvol to be of 'raw' format only.

Modify the processing code to allow the inputvol format to be checked
and used in order to create the encrypted volume.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

There's really no need for it to be there since it's only ever
used inside virStorageBackendCreateQemuImgCmdFromVol
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

In some cases we are checking if the mount namespace is enabled
at two places: one is at the beginning of exported function (e.g.
qemuDomainNamespaceSetupDisk()) and the other is at the beginning
of qemuDomainNamespaceMknodPaths() which is called from the
former function anyway. Then we have some other functions which
rely on the later check solely.

In order to compensate for possibly needless function call,
qemuDomainNamespaceMknodPaths() returns early if @npaths is zero.
Signed-off-by: NMichal Privoznik <mprivozn@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

This patch simplifies virNetDevBridgeCreate and virNetDevMacVLanCreate
functions by making use of the virNetlinkNewLink helper.
Signed-off-by: NShi Lei <shi_lei@massclouds.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

This patch adds wrapper macros around nla_nest_[start|end] and nla_put,
thus getting rid of some redundancy and making virNetlinkNewLink more
readable.
Signed-off-by: NShi Lei <shi_lei@massclouds.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

This patch introduces virNetlinkNewLink helper which wraps the common
libnl/netlink code to create a new link.
Signed-off-by: NShi Lei <shi_lei@massclouds.com>
Signed-off-by: NErik Skultety <eskultet@redhat.com>

It is possible the incoming VM is not fully started when the finish
phase of migration is executed. In libxlDomainMigrationDstFinish,
wait for the thread receiving the VM to complete before executing
finish phase tasks.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

The libxlDomainMigrationDst* functions are a bit flawed in their
handling of modify jobs. A job begins when the destination host
begins receiving the incoming VM and ends after the VM is started.
The finish phase contains another BeginJob/EndJob sequence.

This patch changes the logic to begin a job for the incoming VM
in the prepare phase and end the job in the finish phase.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

The libxlDomainMigrationSrc* functions are a bit flawed in their
handling of modify jobs. A job begins at the start of the begin
phase but ends before the phase completes. No job is running for
the remaining phases of migration on the source host.

Change the logic to keep the job running after a successful begin
phase, and end the job in the confirm phase. The job must also end
in the perform phase in the case of error since confirm phase would
not be executed.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

libxlDoMigrateSrcP2P() performs all phases of the migration
protocol for peer-to-peer migration. Unfortunately the logic
was a bit flawed since it is possible to skip the confirm
phase after a successfull begin and prepare phase. Fix the
logic to always call the confirm phase after a successful begin
and perform. Skip the confirm phase if begin or perform fail.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

If for any reason the restore of a VM fails on the destination host
in a migration operation, the VM is removed (if not persistent) from
the virDomainObjList, meaning it is no longer available for additional
cleanup or processing in the finish phase. Defer removing the VM from
the virDomainObjList until the finish phase, which already contains
logic to remove the VM.
Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Signed-off-by: NJim Fehlig <jfehlig@suse.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 39015a6f modified the test to be more reliable/realistic,
but without checking the return status of virEventRunDefaultImpl
it's possible that the test could run infinitely.

Found by Coverity
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 5b3492fa moved qemuAgentCheckError calls into
qemuAgentCommand for various reasons; however, subsequent
commit 0977b8aa adding a new command made call again
So let's just remove the duplicitous call from
qemuAgentGetInterfaces.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

Commit 5b3492fa moved qemuAgentCheckError calls into
qemuAgentCommand for various reasons; however, subsequent
commit b1aa91e1 restored the call. So let's just remove
the duplicitous call from qemuAgentSetVCPUsCommand.
Signed-off-by: NJohn Ferlan <jferlan@redhat.com>
ACKed-by: NMichal Privoznik <mprivozn@redhat.com>

All backingStore XML definitions have a XML tag with the timestamp. This
timestamp is not defined insinde RNG volume storage schema and it is
causing some problems to validate and check volume XMLs.

https://bugzilla.redhat.com/show_bug.cgi?id=1594266Signed-off-by: NJulio Faracco <jcfaracco@gmail.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

Fedora 26 has reached its EOL on May 29th 2018.

https://lists.fedoraproject.org/archives/list/announce@lists.fedoraproject.org/message/XGG7GYUJN3VDA6HX4KJNFSKSQCGF2FMW/Signed-off-by: NFabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: NErik Skultety <eskultet@redhat.com>

When libvirtd is started, initialize domain objects state with its real
state, not only RUNNING/SHUTOFF.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Broken by v3.10.0-68-gaed3d038.
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Reviewed-by: NJohn Ferlan <jferlan@redhat.com>

Replace the long dead 'xenner' with 'xenfv'.
Signed-off-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: NJim Fehlig <jfehlig@suse.com>

Previous commits removed all capabilities from per-device property
probing for:

  pci-assign
  kvm-pci-assign
  usb-host
  scsi-generic

Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.

Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 72574808
from 2012.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>

Added by QEMU commit 65bb3a5 contained in v1.1.
Signed-off-by: NJán Tomko <jtomko@redhat.com>
Reviewed-by: NAndrea Bolognani <abologna@redhat.com>